PIC16C67-20/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

MFG CO.

PIC16C67-20/SO

8-Bit CMOS Microcontrollers

Microchip Technology

PIC16C67-20/SO Datasheet PDF : 336 Pages

First Prev 41 42 43 44 45 46 47 48 49 50 Next Last

PIC16C6X

4.2.2.8 PCON REGISTER

Applicable Devices

61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

The Power Control register (PCON) contains a ﬂag bit

to allow differentiation between a Power-on Reset to an

external MCLR reset or WDT reset. Those devices with

brown-out detection circuitry contain an additional bit to

differentiate a Brown-out Reset condition from a

Power-on Reset condition.

Note:

BOR is unknown on Power-on Reset. It

must then be set by the user and checked

on subsequent resets to see if BOR is

clear, indicating a brown-out has occurred.

The BOR status bit is a “don't care” and is

not necessarily predictable if the brown-out

circuit is disabled (by clearing the BODEN

bit in the Conﬁguration word).

FIGURE 4-22: PCON REGISTER FOR PIC16C62/64/65 (ADDRESS 8Eh)

U-0

—

bit7

bit 7-2:

bit 1:

bit 0:

U-0

—

Unimplemented: Read as '0'

U-0

R/W-0 R/W-q

—

POR

—

R = Readable bit

bit0 W = Writable bit

U = Unimplemented bit,

read as ‘0’

- n = Value at POR reset

q = value depends on conditions

POR: Power-on Reset Status bit

1 = No Power-on Reset occurred

0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)

Reserved

This bit should be set upon a Power-on Reset by user software and maintained as set. Use of this bit as a general

purpose read/write bit is not recommended, since this may affect upward compatibility with future products.

FIGURE 4-23: PCON REGISTER FOR PIC16C62A/R62/63/R63/64A/R64/65A/R65/66/67

(ADDRESS 8Eh)

U-0

—