CS7620
register programmable in terms of multiples of the
pixel clock rate.
3.6 8-Bit General Purpose DACs
Two 8-bit current-output DACs are available for
external use. Table 4 shows the output specifica-
tions of these DACs.
3.7 Stand By Mode
Stand-by mode can be entered using the PWR_DN
pin. All circuitry on chip including the DACs can
Expose
Parameter
Iout
loading
High impedance
mode
2.155 mA
464 Ω
Low impedance
mode
8.7 mA
115 Ω
Table 4. General Purpose DAC specifications
be powered down. Various functional blocks can
be powered down individually, and are controlled
through registers. Note that the DACs can be pow-
ered down in that way if not in use. During Stand
By mode, the register contents are maintained and
vsync_md = 0 vsync_md = 1
RD_OUT
HSYNC
V1 ... V4
S1 ... S4
H1 ... H4
Expose
RD_OUT
262 lines
first read-out line
last read-out line
Figure 21. High Resolution Mode
don’t care
vsync_md = 0
vsync_md = 1
HSYNC
V1 ... V4
S1 ... S4
H1 ... H4
262 lines
262 lines
first read-out line
last read-out line first read-out line
picture n
picture n
picture (n+1)
Figure 22. Low Resolution Mode
20
DS301PP2