CS4350 View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
CS4350 Datasheet PDF : 41 Pages
| |||
8.7.2
CS4350
Freeze Controls (FREEZE) Bit 5
Function:
When set to 1, this function allows modifications to be made to the registers without the changes taking
effect until FREEZE is set back to 0. To make multiple changes in the Control Port registers take effect
simultaneously, enable the FREEZE bit, make all register changes, then disable the FREEZE bit.
When set to 0 (default), register changes take effect immediately.
8.7.3
Popguard Enable (POPG_EN) Bit 4
Function:
When set to 1, (default) the Device will initiate a ramping function as outlined in Section 4.7 on page 22.
When set to 0, the outputs will step to VQ upon release of PDN.
8.7.4
RMCK control (RMCK_CTRL[1:0]) Bits 3:2
Default = 00
RMCK_CTRL1 RMCK_CTRL0
0
0
0
1
1
0
1
1
Mode
256x LRCK for 48 kHz and 96 kHz, 128x @ 192kHz
512x @ 48kHz, 256x @ 96 kHz, 128x @ 192kHz
Manual control (see RMCK Ratio Select)
RMCK pin driven low
Function: These bits set the function of the RMCK pin with respect to the LRCK.
8.7.5
RMCK Ratio Select (R_SELECT[1:0]) Bits 2:1
Default = 00
Function: To select the RMCK-to-LRCK ratio.
R_SELECT1
0
0
1
1
R_SELECT0
0
1
0
1
RMCK/LRCK Ratio
512
256
128
64
Note: RMCK_CTRL must be set to 10 to enable this function. Please note the maximum RMCK output
frequency as specified in the ”Switching Specifications - Serial Audio Interface” on page 13.
DS691F1
35
Share Link: 