datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

C8051F362-GM2 View Datasheet(PDF) - Silicon Laboratories

Part Name
Description
MFG CO.
C8051F362-GM2
Silabs
Silicon Laboratories 
C8051F362-GM2 Datasheet PDF : 288 Pages
First Prev 141 142 143 144 145 146 147 148 149 150 Next Last
C8051F360/1/2/3/4/5/6/7/8/9
SFR Definition 14.1. CCH0CN: Cache Control
SFR Page: F
SFR Address: 0x84
R/W
R/W
CHWREN CHRDEN
Bit7
Bit6
R/W
CHPFEN
Bit5
R/W
CHFLSH
Bit4
R/W
CHRETI
Bit3
R/W
CHISR
Bit2
R/W
R/W
Reset Value
CHMOVC CHBLKW 11100110
Bit1
Bit0
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
CHWREN: Cache Write Enable.
This bit enables the processor to write to the cache memory.
0: Cache contents are not allowed to change, except during Flash writes/erasures or cache
locks.
1: Writes to cache memory are allowed.
CHRDEN: Cache Read Enable.
This bit enables the processor to read instructions from the cache memory.
0: All instruction data comes from Flash memory or the prefetch engine.
1: Instruction data is obtained from cache (when available).
CHPFEN: Cache Prefetch Enable.
This bit enables the prefetch engine.
0: Prefetch engine is disabled.
1: Prefetch engine is enabled.
CHFLSH: Cache Flush.
When written to a ‘1’, this bit clears the cache contents. This bit always reads ‘0’.
CHRETI: Cache RETI Destination Enable.
This bit enables the destination of a RETI address to be cached.
0: Destinations of RETI instructions will not be cached.
1: RETI destinations will be cached.
CHISR: Cache ISR Enable.
This bit allows instructions which are part of an Interrupt Service Routine (ISR) to be cached.
0: Instructions in ISRs will not be loaded into cache memory.
1: Instructions in ISRs can be cached.
CHMOVC: Cache MOVC Enable.
This bit allows data requested by a MOVC instruction to be loaded into the cache memory.
0: Data requested by MOVC instructions will not be cached.
1: Data requested by MOVC instructions will be loaded into cache memory.
CHBLKW: Block Write Enable.
This bit allows block writes to Flash memory from software.
0: Each byte of a software Flash write is written individually.
1: Flash bytes are written in groups of four (for code space writes).
Rev. 1.0
149

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]