datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

AM50-0006 View Datasheet(PDF) - M/A-COM Technology Solutions, Inc.

Part Name
Description
MFG CO.
AM50-0006
MA-COM
M/A-COM Technology Solutions, Inc. 
AM50-0006 Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
AM50-0006
Low Noise Amplifier
1400 - 2000 MHz
Data for 1700 - 2000 MHz Operation
Functional Schematic
Γ
Recommended PCB Configuration
Layout View
Pin 1
Rev. V4
Input Reflection Coefficient
Frequency
Γin (mag)
Γin (ang)
1700 MHz
0.699
48.47°
1850 MHz
0.674
38.68°
2000 MHz
0.649
29.27°
External Circuitry Parts List 7
Part
Value
Purpose
C1
47 pF
DC Block
C2
470 pF
By-Pass
L1
2.7 nH
Tuning
L2
22 nH
RF Choke
R1
See note 8
Current control
C3
470 pF
By-Pass
7. All external circuitry parts are readily available, low cost
surface mount components (.060 in. x .030 in. or .080 in.
x .050 in.)
8. Pin 2 allows use of an external resistor to ground for optional,
higher current.
For IDD ~ 5 mA, R1 = 150 ohms;
IDD ~ 6.5 mA, R1 = 120 ohms;
IDD ~ 20 mA, R1 = 27 ohms.
Cross Section View
The PCB dielectric between RF traces and RF ground layers
should be chosen to reduce RF discontinuities between 50
lines and package pins. M/A-COM recommends an FR-4 di-
electric thickness of 0.008” (0.20 mm) yielding a 50 line width
of 0.015” (0.38 mm). The recommended RF metalization
thickness is 1 ounce copper.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]