dition
reset condition
Contacts in reset position. Contact po-
sition might change during transporta-
tion and must be reset before use.
RF Signal Relays
AXICOM
Coil Operating Range
HF3 Relay (Continued)
140 mW
Coil operating Range
140 mW
Umax. at 0 A
s in reset position. Contact po-
ight change during transporta-
must be reset beforUenoum.sneo.minal coil voltage
Uop. min.
Urel. min.
70 mW
Ambient Temperature [°C]
Unom = 3.5 Nominal coil voltage
Umax. = Upper limit of the operative range7o0fmW
3 the coil voltage (limiting voltage)
Uop. min. =
Lower limit of the operativeUrmaaxn. agte0 oAf
2.5 the coil voltage (reliable operate voltage)
2 For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
1.5 the coil voltage (reliable release voltage)
1 Unom. nominal coil voltage
70 mW
RF Data
Isolation
a3.t5 100MHz/900MHz
at 3GHz
Inser3tion loss
80dB/72dB
45d7B0 mW
at 100MHz/900MHz
a2.t5 3GHz
0U.0m3axd. aBt/00.A12dB
0.35dB
Voltage standing wave ratio (VSWR)
2
at 100MHz/900MHz/3GHz
1.05/1.20/1.20
80dB/72dB
40dB
0.03dB/0.12dB
0.40dB
1.05/1.20/1.40
1.5
Oth1er DUnaomt.an omina l coil voltage
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
0.5
refer to the Product Compliance Support Center at
wwUwop..tmein.c. om/customersupport/rohssupportcenter
Amb0ient temperature
-55°C to +85°C
Therm-55a-l45re-3s5is-2t5an-1c5 e-5 5 15 25 3 5 45 55 65 75 85 95 105 1<151162551K35/W
Category of environAmmebnietnatl Tperomtepcertiaotnure [°C]
IEC 61810
RT III - wash tight
Degree of protection, IEC 60529 IP 67, immersion cleanable
Vibration resistance (functional)
35g, 10 to 1000Hz
Shock resistance (functional), half sinus 11ms
50g
Shock resistance (destructive), half sinus 0.5ms 150g
Terminal type
SMT
Weight
max. 2.5g
Resistance to soldering heat SMT
IEC 60068-2-58
265°C/10s
Moisture sensitive level, JEDEC J-Std-020D
MSL3
Ultrasonic cleaning
not recommended
Packaging/unit
reel/400 pcs., box/400 or 2000 pcs.
All
specificatio0.n5 s
subject
to
change.
Consult Tyco
Uop. min.
Electronics
for
latest
specifications.
5 of 12
0
-55 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105 115 125 135
Ambient Temperature [°C]
age)
eset min.
Insulation Data
50Ω version 75Ω version
Initial dielectric strength
between open contacts
between contact and coil
Initial surge withstand voltage
600Vrms
1000Vrms
between open contacts
1000V
between contact and coil
1500V
age)
or latest specifications.
5 of 12
2
06-2013, Rev. 0613
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.