M38861EDFS View Datasheet(PDF) - MITSUBISHI ELECTRIC

Part Name

Description

MFG CO.

M38861EDFS

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI ELECTRIC  

[Data Bus Buffer Status Register 0, 1

(DBBSTS0, DBBSTS1)] 002916, 002C16

The data bus buffer status register 0, 1 consist of eight bits.

Bits 0, 1, and 3 are read-only bits and indicate the condition of the

data bus buffer. Bits 2, 4, 5, 6, and 7 are user definable flags

which can be set by program, and can be read/written. This regis-

ter can be read from the host CPU when the A0 pin is set to “H”

only.

•Bit 0: Output buffer full flag OBF0, OBF1

When writing data to the output data bus buffer, these flags are

set to “1”. When reading the output data bus buffer from the host

CPU, these flags are cleared to “0”.

•Bit 1: Input buffer full flag IBF0, IBF1

When writing data from the host CPU to the input data bus

buffer, these flags are set to “1”. When reading the input data

bus buffer from the slave CPU side, these flags are cleared to

“0”.

•Bit 3: A0 flag A00, A01

When writing data from the host CPU to the input data bus

buffer, the level of the A0 pin is latched.

[Input Data Bus Buffer Register 0, 1 (DBBIN0,

DBBIN1)] 002816, 002B16

Data on the data bus is latched to DBBIN by writing request from

the host CPU. Data of DBBIN can be read from the data bus

buffer registers (address 002816 or 002B16) on SFR.

[Output Data Bus Buffer Register 0, 1

(DBBOUT0, DBBOUT1)] 002816, 002B16

When writing data to the data bus buffer registers (address 002816

or 002B16) on SFR, data is set to DBBOUT. Data of DBBOUT is

output from the host CPU to the data bus by performing the read-

ing request when the A0 pin is set to “L”.

MITSUBISHI MICROCOMPUTERS

3886 Group

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

38

Share Link: