datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  TI  >>> TXS0102 PDF

TXS0102 Datasheet PDF - Texas Instruments

Part NumberTXS0102 TI
Texas Instruments TI
TXS0102 Datasheet PDF : TXS0102 pdf   
TXS0102 image

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
• I2C/SMBus

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23 

Other manufacturer searches related to TXS0102

LMV7235 45ns, Ultra Low Power, Low Voltage, Rail-to-Rail Input Comparator with Open-Drain/Push-Pull Output LMV7235 View National ->Texas Instruments
LMC7215 Micro-Power, Rail-to-Rail CMOS Comparators with Open-Drain/Push-Pull Outputs and TinyPak™ Package LMC7215 View National ->Texas Instruments
HPA02270YZPR 2-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator With 8-kV HBM ESD HPA02270YZPR View Texas Instruments
FP202 Push-Pull Circuit Applications FP202 View SANYO -> Panasonic
ADG3301 Low Voltage 1.15 V to 5.5 V, Single-Channel Bidirectional Logic Level Translator ADG3301 View Analog Devices
GTL2003BQ 8-bit bidirectional low voltage translator GTL2003BQ View NXP Semiconductors.
LMV7235 75-ns, Ultra Low Power, Low Voltage, Rail-to-Rail Input Comparator with Open-Drain and Push-Pull Output LMV7235 View Texas Instruments
MAX3397E Dual Bidirectional Low-Level Translator in µDFN MAX3397E View Maxim Integrated
ADG3300 Low Voltage 1.15 V to 5.5 V, 8-Channel Bidirectional Logic Level Translator ADG3300 View Analog Devices
HV507 300V, 64-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs HV507 View Supertex Inc

Share Link : 

Language : 한국어   简体中文   日本語   русский   español

All Rights Reserved © 2014 - 2018  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]