datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :

TXB0106-Q1 Datasheet PDF - Texas Instruments

Home  >>>  TI  >>> TXB0106-Q1 PDF

Part NumberTXB0106-Q1 TI
Texas Instruments TI
TXB0106-Q1 Datasheet PDF : TXB0106-Q1 pdf       
TXB0106-Q1 image

This 6-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXB0106 is designed so that the OE input circuit is supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

• Qualified for Automotive Applications
• 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port (VCCA≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at GND,
   All Outputs Are in the High-Impedance State
• OE Input Circuit Referenced to VCCA
• Ioff Supports Partial-Power-Down Mode Operation
• ESD Protection Exceeds AEC-Q100
   – A Port
      – 2000-V Human-Body Model
      – 1500-V Charged-Device Model
   – B Port
      – ±10-kV Human-Body Model
      – 1500-V Charged-Device Model

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17 
Share Link : TI

Language : Korean   Chinese   Japanese   Russian   Spanish

@ 2014 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]