datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : MSA-3111 MSA-3111-BLK MSA-3111-BLKG MSA-3111-TR1 MSA-3111-TR1G MSA-3111-TR2 MSA-3111-TR2G MSA-3186 MSA-3186-BLK MSA-3186-BLKG MSA-3186-TR1 MSA-3186-TR1G MSA-3186-TR2 MSA-3186-TR2G Avagotech
Avago Technologies
Description : SILICON BIPOLAR RFIC AMPLIFERS

Description
The MSA-31XX series are high performance SILICON BIPOLAR RFIC AMPLIFERS designed to be cascadable in 50 Ω systems. The stability factor of K > 1 contributes to easy cascading in numerous narrow and broadband IF and RF
commercial and industrial applications.

Features
MSA-3111
•  Surface Mount SOT-143 Package
•  3 dB Bandwidth: DC to 0.5 GHz
•  18.4 dB Gain at 1 GHz
•  3.5 dB NF at 1 GHz
• Lead-free Option Available

MSA-3186
•  Surface Mount Plastic Microstrip Package
•  3 dB Bandwidth: DC to 0.5 GHz
•  18.7 dB Gain at 1 GHz
•  3.5 dB NF at 1 GHz
• Lead-free Option Available

View
Part Name(s) : TA0016 RFMD
RF Micro Devices
Description : European Applicantions for RF2403 Cordless Telephone Front End RFIC

A front end RFIC for cordless telephone applications has been developed for use in the 902MHz to 928MHz ISM (Industrial-Scientific-Medical) band in the United States under Part 15 of the FCC Rules. Potential applications for this RFIC in this frequency band include cordless telephones, wireless LANs, wireless security systems and point-of-sale (POS) terminals.

This RFIC, the RF2403, consists of a single-stage LNA, a two-stage PA with 21dBm of output power and a transmit/receive switch. The RFIC is built using a commercial GaAs MESFET process, and is packaged in a SOP-16 narrowbody surface-mount package. The circuit operates with a +5.0V supply, and has separate enable lines which control the bias to the transmit and receive functions. All bias and control signals operate with voltages which lie between ground potential and VDD. With both enable lines at logic low, the circuit is in a “power down” mode in which it draws approximately 1.0mA of leakage current from the VDD supply.

 

View
Part Name(s) : MSA-2011 MSA-2011-TR1 MSA-2035 MSA-2085 MSA-2086 MSA-2086-TR1 MSA-20XX HP
HP => Agilent Technologies
Description : SILICON BIPOLAR RFIC Amplifiers

Description
The MSA-20XX series are high performance SILICON BIPOLAR RFIC amplifiers designed to be cascadable in 50 Ωsystems. The stability factor of K > 1 contributes to easy cascading in numerous narrow and broadband IF and RF commercial and industrial applications.

Features
MSA-2011
• Surface Mount SOT-143 Package
• 3 dB Bandwidth: DC to 1.0 GHz
• 16.2 dB Gain at 1 GHz
• 4.3 dB NF at 1 GHz
MSA-2035
• Hermetic Ceramic Package
• 3 dB Bandwidth: DC to 1.1 GHz
• 17.3 dB Gain at 1 GHz
• 3.7 dB NF at 1 GHz
MSA-2085
• Plastic Microstrip Package
• 3 dB Bandwidth: DC to 1.1 GHz
• 16.6 dB Gain at 1 GHz
• 3.7 dB NF at 1 GHz
MSA-2086
• Surface Mount Plastic Microstrip Package
• 3 dB Bandwidth: DC to 1.1 GHz
• 16.6 dB Gain at 1 GHz
• 3.7 dB NF at 1 GHz

View
Part Name(s) : UPC8106TB UPC8106TB-E3-A CEL
California Eastern Laboratories.
Description : 3 V SILICON RFIC FREQUENCY UPCONVERTER

DESCRIPTION
NEC's UPC8106TB is a SILICON RFIC designed as a frequency upconverter for cellular/cordless telephone transmitter stages and features improved intermodulation. This device is housed in a 6 pin super mini mold or SOT-363 package making it ideal for reducing system size. The UPC8106TB is manufactured using NEC's 20 GHz fT NESAT™ III SILICON BIPOLAR process.
NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.

FEATURES
• RECOMMENDED OPERATING FREQUENCY:
   fRFout = 0.4 GHz to 2.0 GHz
   fIFin = 100 MHz to 400 MHz
• SUPPLY VOLTAGE:
   VCC = 2.7 to 5.5 V
• HIGH DENSITY SURFACE MOUNTING:
   6 pin super mini mold package
• LOW CARRIER LEAKAGE:
   Due to double balanced mixer
• BUILT-IN POWER SAVE FUNCTION

APPLICATION
• CELLULAR/CORDLESS TELEPHONE

 

View
Part Name(s) : LM324 LM358 LM358ISO8X LM324ISO14X CADEKA
Cadeka Microcircuits LLC.
Description : Low Power, 3V to 36V, Single/Dual/Quad AMPLIFERS

General Description
The LM358 (dual), and LM324 (quad) are voltage feedback AMPLIFERS that are internally frequency compensated to provide unity gain stability. At unity gain (G=1), these AMPLIFERS offer 550kHz of bandwidth. They consume only 0.5mA of supply current over the entire power supply operating range. The LM358, and LM324 are specifcally designed to operate from single or dual supply voltages.
The LM358, and LM324 offer a common mode voltage range that includes ground and a wide output voltage swing. The combination of low-power, high supply voltage range, and low supply current make these AMPLIFERS well suited for many general purpose applications and as alternatives to several industry standard AMPLIFERS on the market today.

FEATURES
■ Unity gain stable
■ 100dB voltage gain
■ 550kHz unity gain bandwidth
■ 0.5mA supply current
■ 20nA input bias current
■ 2mV input offset voltage
■ 3V to 36V single supply voltage range
■ ±1.5V to ±18V dual supply voltage range
■ Input common mode voltage range includes ground
■ 0V to VS-1.5V output voltage swing
■ Improved replacements for industry standard LM358 and LM324
■ LM358: Pb-free SOIC-8
■ LM324: Pb-free SOIC-14

APPLICATIONS
■ Battery Charger
■ Active Filters
■ Transducer AMPLIFERS
■ General purpose controllers
■ General purpose instruments

View
Part Name(s) : CLC2011 CLC2011IMP8MTR CLC2011IMP8X CLC2011ISO8X CLC4011 CLC4011ISO14MTR CLC4011ISO14X CLC4011ITP14 CLC4011ITP14MTR CLC4011ITP14X Exar
Exar Corporation
Description : Low Power, Low Cost, Rail-to-Rail I/O AMPLIFERS

General Description
The COMLINEAR CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback AMPLIFERS. At 2.7V, the CLCx011 family uses only 136μA of supply current per amplifer and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The input voltage range exceeds the negative and positive rails.
The CLCx011 family of AMPLIFERS offer high BIPOLAR performance at a low CMOS prices. They offer superior dynamic performance with 4.9MHz small signal bandwidths and 5.3V/μs slew rates. The combination of low power, high bandwidth, and rail-to-rail performance make the CLCx011 AMPLIFERS well suited for battery-powered communication/computing systems.

FEATURES
■ 136μA supply current
■ 4.9MHz bandwidth
■ Output swings to within 20mV of either rail
■ Input voltage range exceeds the rail by >250mV
■ 5.3V/μs slew rate
■ 21nV/√Hz input voltage noise
■ 16mA output current
■ Fully specifed at 2.7V and 5V supplies

APPLICATIONS
■ Portable/battery-powered applications
■ PCMCIA, USB
■ Mobile communications, cell phones, pagers
■ ADC buffer
■ Active flters
■ Portable test instruments
■ Notebooks and PDA’s
■ Signal conditioning
■ Medical Equipment
■ Portable medical instrumentation

View
Part Name(s) : MSA-3111 MSA-3111-BLK MSA-3111-BLKG MSA-3111-TR1 MSA-3111-TR1G MSA-3111-TR2 MSA-3111-TR2G MSA-3186 MSA-3186-BLK MSA-3186-BLKG MSA-3186-TR1 MSA-3186-TR1G MSA-3186-TR2 MSA-3186-TR2G HP
HP => Agilent Technologies
Description : SILICON BIPOLAR RFIC Amplifiers

Description
The MSA-31XX series are high performance SILICON BIPOLAR RFIC amplifiers designed to be cascadable in 50Ω systems. The stability factor of K > 1 contributes to easy cascading in numerous narrow and broadband IF and RF commercial and industrial applications.

Features
MSA-3111
• Surface Mount SOT-143 Package
• 3 dB Bandwidth: DC to 0.5 GHz
• 18.4 dB Gain at 1 GHz
• 3.5 dB NF at 1 GHz
• Lead-free Option Available

MSA-3186
• Surface Mount Plastic Microstrip Package
• 3 dB Bandwidth: DC to 0.5 GHz
• 18.7 dB Gain at 1 GHz
• 3.5 dB NF at 1 GHz
• Lead-free Option Available

View
Part Name(s) : UPC1687GV UPC1687GV-E1 CEL
California Eastern Laboratories.
Description : 900 MHz SILICON RFIC DOWN CONVERTER

DESCRIPTION
The UPC1687GV is a SILICON RFIC designed as a wide-band mixer/oscillator/IF amp suitable for UHF TV tuners. Device features include: 25 dB gain from 55 to 900 MHz and an output power of +10 dBm at the saturation point. The IC is housed in an 8 pin SSOP package.

FEATURES
• WIDE-BAND OPERATION: DC to 900 MHz
• SMALL PACKAGE
• DOUBLE BALANCED MIXER: Low Distortion Low Oscillator Radiation
• BALANCED AMPLIFIER FOR VOLTAGE CONTROLLED OSCILLATORS: Up to UHF Frequency
• SINGLE ENDED PUSH-PULL IF AMPLIFIER: Constant Resistive Impedance
• SWITCHABLE AS MIXER OR IF AMP

View
Part Name(s) : CLC1050 CLC2050 CLC4050 CLC1050IST5X CLC2050ISO8X CLC4050ISO14X CADEKA
Cadeka Microcircuits LLC.
Description : Low Power, 3V to 36V, Single, Dual, Quad AMPLIFERS

General Description
The COMLINEAR CLC1050 (single), CLC2050 (dual), and CLC4050 (quad) are voltage feedback AMPLIFERS that are internally frequency compensated to provide unity gain stability. At unity gain (G=1), these AMPLIFERS offer 550kHz of bandwidth. They consume only 0.5mA of supply current over the entire power supply operating range. The CLC1050, CLC2050, and CLC4050 are specifcally designed to operate from single or dual supply voltages.

FEATURES
● Unity gain stable
● 100dB voltage gain
● 550kHz unity gain bandwidth
● 0.5mA supply current
● 20nA input bias current
● 2mV input offset voltage
● 3V to 36V single supply voltage range
● ±1.5V to ±18V dual supply voltage range
● Input common mode voltage range includes ground
● 0V to VS-1.5V output voltage swing
● CLC2050: improved replacement for industry standard LM358
● CLC4050: Improved replacement for industry standard LM324
● CLC1050: Pb-free SOT23-5
● CLC2050: Pb-free SOIC-8
● CLC4050: Pb-free SOIC-14

APPLICATIONS
● Battery Charger
● Active Filters
● Transducer AMPLIFERS
● General purpose controllers
● General purpose instruments

View
Part Name(s) : MSA-2011 MSA-2011-BLK MSA-2011-BLKG MSA-2011-TR1 MSA-2011-TR1G MSA-2011-TR2 MSA-2011-TR2G MSA-2086 MSA-2086-BLK MSA-2086-BLKG MSA-2086-TR1 MSA-2086-TR1G MSA-2086-TR2 MSA-2086-TR2G AVAGO
Avago Technologies
Description : SILICON BIPOLAR RFIC Amplifiers

Description
The MSA-2011 and MSA-2086 are high performance SILICON BIPOLAR RFIC amplifiers designed to be cascadable in
50 Ω systems. The stability factor of K > 1 contributes to easy cascading in numerous narrow and broadband IF
and RF commercial and industrial applications.

Features
MSA-2011
• Surface Mount SOT-143 Package
• 3 dB Bandwidth: DC to 1.0 GHz
• 16.2 dB Gain at 1 GHz
• 4.3 dB NF at 1 GHz
• Lead-free Option Available

MSA-2086
• Surface Mount Plastic Microstrip Package
• 3 dB Bandwidth: DC to 1.1 GHz
• 16.6 dB Gain at 1 GHz
• 3.7 dB NF at 1 GHz
• Lead-free Option Available

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]