datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : SENSITIVE TRIACS (0.8 A to 8 A)

General Description
Teccors line of SENSITIVE GATE TRIACS includes devices with current capabilities through 8 A. Voltage ranges are available from 200 V to 600 V. This line features devices with guaranteed GATE control in Quadrants II and IV as well as control in the commonly used Quadrants I and III. Four-quadrant control devices require SENSITIVE GATE TRIACS. They can be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. Note that TRIACS with low IGT values in Quadrants II and IV will have lower dv/dt characteristics.
The SENSITIVE GATE triac is a bidirectional AC switch and is GATE controlled for either polarity of main terminal voltage. It is used primarily for AC switching and phase control applications such as motor speed controls, temperature modulation controls, and lighting controls.
The epoxy TO-92 and TO-220 configurations feature Teccors electrically-isolated construction where the case or mounting tab is internally isolated from the semiconductor chip and lead attachments. Non-isolated epoxy TO-202 packages are available as well as TO-251 and surface mount TO-252 (D-Pak). Tape and-reel capability and tube packing also are available. See “Packing Options” section of this catalog.

Features
• Electrically-isolated packages
• Glass-passivated junctions ensure long device reliability and parameter stability
• Voltage capability — up to 600 V
• Surge capability — up to 80 A
• Four-quadrant gating guaranteed

Compak SENSITIVE GATE Triac
• Surface mount package — 0.8 A and 1 A series
• New small profile three-leaded Compak package
• Packaged in embossed carrier tape with 2,500 devices per reel
• Can replace SOT-223

Description : SENSITIVE TRIACS (0.8 A to 8 A)

General Description
Teccors line of SENSITIVE GATE TRIACS includes devices with current capabilities through 8 A. Voltage ranges are available from 200 V to 600 V. This line features devices with guaranteed GATE control in Quadrants II and IV as well as control in the commonly used Quadrants I and III. Four-quadrant control devices require SENSITIVE GATE TRIACS. They can be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. Note that TRIACS with low IGT values in Quadrants II and IV will have lower dv/dt characteristics.
   
Features
• Electrically-isolated packages
• Glass-passivated junctions ensure long device
    reliability and parameter stability
• Voltage capability — up to 600 V
• Surge capability — up to 80 A
• Four-quadrant gating guaranteed
   
Compak SENSITIVE GATE Triac
• Surface mount package — 0.8 A and 1 A series
• New small profile three-leaded Compak package
• Packaged in embossed carrier tape with 2,500
    devices per reel
• Can replace SOT-223
   

Description : SENSITIVE TRIACS (0.8 A to 8 A)

General Description
Teccors line of SENSITIVE GATE TRIACS includes devices with current capabilities through 8 A. Voltage ranges are available from 200 V to 600 V. This line features devices with guaranteed GATE control in Quadrants II and IV as well as control in the commonly used Quadrants I and III. Four-quadrant control devices require SENSITIVE GATE TRIACS. They can be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. Note that TRIACS with low IGT values in Quadrants II and IV will have lower dv/dt characteristics.

Features
• RoHS Compliant
• Electrically-isolated packages
• Glass-passivated junctions ensure long device reliability and parameter stability
• Voltage capability — up to 600 V
• Surge capability — up to 80 A
• Four-quadrant gating guaranteed

Compak SENSITIVE GATE Triac
• Surface mount package — 0.8 A and 1 A series
• New small profile three-leaded Compak package
• Packaged in embossed carrier tape with 2,500 devices per reel
• Can replace SOT-223

Motorola
Motorola => Freescale
Description : SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

. . . designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon GATE controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative GATE triggering.

SENSITIVE GATE Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions
GATE Triggering 4 Mode — 2N6071A,B, 2N6073A,B, 2N6075A,B
• Blocking Voltages to 600 Volts
• All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
• Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability

Description : SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

Designed primarily for full‐wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full‐wave silicon GATE controlled solid‐state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative GATE triggering.

Features
SENSITIVE GATE Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions
GATE Triggering: 4 Mode − 2N6071A, B; 2N6073A, B; 2N6075A, B
• Blocking Voltages to 600 V
• All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
• Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability
• Device Marking: Device Type, e.g., 2N6071A, Date Code

KERSEMI
Kersemi Electronic Co., Ltd.
Description : SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon GATE controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative GATE triggering.

Features
• Pb−Free Package is Available*
SENSITIVE GATE Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions
GATE Triggering: 4 Mode − 2N6071A, B; 2N6073A, B; 2N6075A, B
• Blocking Voltages to 600 V
• All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
• Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability
• Device Marking: Device Type, e.g., 2N6071A, Date Code

ST-Microelectronics
STMicroelectronics
Description : High temperature 10 A SENSITIVE TRIACS

Description
Specifically designed to operate at 150 °C, the new 10 A T1010H TRIACS provide an enhanced performance in terms of power loss and thermal dissipation. This allows the optimization of the heatsink size, leading to space and cost effectiveness when compared to electro mechanical solutions.

Features
■ Medium current TRIAC
■ Logic level SENSITIVE TRIAC
■ 150 °C max. Tj turn-off commutation
■ Clip bounding
■ RoHS (2002/95/EC) compliant packages

Applications
■ The T1010H is designed for the control of AC actuators in appliances and industrial systems.
■ The multi-port drive of the microcontroller can control the multiple loads of such appliances and systems through these SENSITIVE GATE TRIACS.

 

ST-Microelectronics
STMicroelectronics
Description : High temperature 8 A SENSITIVE TRIACS

Description
Specifically designed to operate at 150 °C, the new 8 A T810H TRIACS provide an enhanced performance in terms of power loss and thermal dissipation. This allows the optimization of the heatsink size, leading to space and cost effectiveness when compared to electromechanical solutions

Features
■ Medium current TRIAC
■ Logic level SENSITIVE TRIAC
■ 150 °C max. Tj turn-off commutation
■ Clip bounding
■ RoHS (2002/95/EC) compliant packages

Applications
■ The T810H is designed for the control of AC actuators in appliances and industrial systems.
■ The multi-port drive of the microcontroller can control the multiple loads of such appliances and systems through these SENSITIVE GATE TRIACS.

Description : SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

Designed for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching applications.

Features
SENSITIVE GATE allows Triggering by Microcontrollers and other Logic Circuits
• High Immunity to dv/dt − 25 V/μs minimum at 110°C
• High Commutating di/dt − 8.0 A/ms minimum at 110°C
• Maximum Values of IGT, VGT and IH Specified for Ease of Design
• On-State Current Rating of 15 Amperes RMS at 70°C
• High Surge Current Capability − 120 Amperes
• Blocking Voltage to 800 Volts
• Rugged, Economical TO−220AB Package
• Uniform GATE Trigger Currents in Three Quadrants, Q1, Q2, and Q3
• Pb−Free Packages are Available*

Description : SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

SENSITIVE GATE TRIACS Silicon Bidirectional Thyristors

Designed for industrial and consumer applications for full wave control of ac loads such as appliance controls, heater controls, motor controls, and other power switching applications.

SENSITIVE GATE Allows Triggering by Microcontrollers and other Logic Circuits
• Uniform GATE Trigger Currents in Three Quadrants; Q1, Q2, and Q3
• High Immunity to dv/dt — 25 V/μs Minimum at 110°C
• High Commutating di/dt — 8.0 A/ms Minimum at 110°C
• Minimum and Maximum Values of IGT, VGT and IH Specified for Ease of Design
• On-State Current Rating of 8 Amperes RMS at 70°C
• High Surge Current Capability — 70 Amperes
• Blocking Voltage to 800 Volts
• Rugged, Economical TO220AB Package
• Device Marking: Logo, Device Type, e.g., MAC8SM, Date Code

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]