datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 3M™ Twin Axial Cable

3M™ Twin Axial Cable
SL8800 Series
Your system should be built around performance, not around your Cables.

The 3M Internal Twin Axial Ribbon Cable SL8800 Series is a revolutionary ultra low-profile, high-speed, high signal density Cable. 3M offers a broad line of available pair counts to cover many of the latest differential pair Cable applications.

3M SL8800 Series Cable is an optimal solution for space-constrained systems. This Cable is unjacketed, extremely thin and can even be folded with minimal loss or performance impact. SL8000 Series Cable can route along the sides of cabinets and through narrow openings in densely packaged equipment. Some high density offerings sacrifice performance to achieve density. Flex circuits are often used for tight packaging requirements, but flex circuitry can be cost prohibitive and can have limited bandwidth in some applications. Long high-speed runs over FR4 materials may require redrive chips adding cost and complexity to your system. SL8800 Series Cable is being installed in some of today’s most powerful enterprise and high-performance computing systems to address both performance and packaging.

Technical Information
• 100 Ohm differential pairs
• Four pairs with and without sidebands
• Solid polyolefin insulation
• .88 mm thick
• RoHS* compliant
• The Cable used in this assembly is UL AWM 21008 (150V, 80C); file number E42769
• The connector materials (resin/PCB) are rated 94 V-0
• Halogen-free**

Description : Quick mating panel and Cable connectors

Description
The versatile “ SMS “ Quick mating panel and Cable connectors are a highly cost effective system approach to solving the constant demand for more cost effective Interconnection techniques.
It is a range of multiway connectors using N° 16 TRIM TRIO .0625” (1.6mm) diameter contacts and available in 10 contact arrangements from 2 to 36 positions.
Having no additional hardware, Panel receptacle connectors snap and lock into panel cutouts and Cable plugs quick connect and disconnect with positive retention locks.
Cable plug connectors also feature pin protection skirts, positive polarisation and can be supplied with or without integrated strain relief hoods.
Cable receptacle connectors (only with integrated strain relief hoods) are developed to mate with Cable plug connectors thus offering Solutions for Cable to Cable applications.

Features and benefits
• Available in 10 contact arrangements.
• Self mountable panel receptacle with positive housing retention.
Cable plugs with retaining latches for positive locking.
Cable plug has pin protection skirt to prevent damage of male contacts
• Positive polarization keys prevent mismating.
Cable plug and receptacle have integrated strain relief hood which can take a wide range of Cables.
Cable plug and receptacle have discrimination cavities in between contact cavities, thus offering discrimination without contact loss.
• UL recognized File Nr.: E238675

Description : 97 series accessories Cable clamps, bushing

Cable Clamp MS3057A Type
For jacketed Cable or wires protected by tub ing. Both clamping halves float for maximum strain relief. For unjacketed Cable or wires, use corresponding MS3420 bushing. To order clamp with bushing, add -1 to the 97-number. Two telescoping bushings are furnished with shells sizes 24 and larger.

This Cable clamp is die-cast zinc alloy and lim ited to the following plating variations:
Std - olive drab/green chromate
(621) - black chromate
(676) - bright nickel
(624) - green zinc alloy
(689) - electroless nickel

Bushing MS3420
Rubber bushing specifically designed for MS3057A type Cable clamp. Can also be used as a reducing bushing.

Cable Clamp AN3057 Type
For jacketed Cable or wires protected by tubing. Cable or wires should be centered in jaws of clamp for maximum grip. A vinyl or rubber bushing or sleeve may be used for centering. One resilCable Clamp AN3057 Type For jacketed Cable or wires protected by tubing. Cable or wires should be centered in jaws of clamp for maximum grip. A vinyl or rubber bushing or sleeve may be used for centering. One resil ient washer and two fiber washers are included with each clamp. This Cable clamp is die-cast zinc alloy and limited to the following plating variations: Std - olive drab/green chromate (621) - black chromate (676) - bright nickel (624) - green zinc alloy (689) - electroless nickel ient washer and two fiber washers are included with each clamp.

This Cable clamp is die-cast zinc alloy and limited to the following plating variations:
Std - olive drab/green chromate
(621) - black chromate
(676) - bright nickel
(624) - green zinc alloy
(689) - electroless nickel

Description : Ribbon Cable Interconnect Solutions

Disclaimer
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the informa tion is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.


Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides:
■ Cross-Reference from Non-compliant to Compliant Products
■ Ability to browse RoHS Compliant Products in our on-line catalog
■ Downloadable Technical Data Customer Information Presentation
■ More detailed information regarding the definitions used above
■ So whatever your questions when it comes to RoHS, we have the answers at www.te.com/leadfree

Description : Ribbon Cable Interconnect Solutions

Disclaimer
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the informa tion is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides:
■ Cross-Reference from Non-compliant to Compliant Products
■ Ability to browse RoHS Compliant Products in our on-line catalog
■ Downloadable Technical Data Customer Information Presentation
■ More detailed information regarding the definitions used above
■ So whatever your questions when it comes to RoHS, we have the answers at www.te.com/leadfree

Part Name(s) : 9L26068
ETC
Unspecified
Description : 9L26068 Flat - Gray Ribbon 9L260XX Series

Belden^s .050" pitch gray Ribbon Cable was designed for general purpose electronic Interconnect
applications. The Cable provides reliable mass-termination to standard IDC connectors.

Part Name(s) : 26001-0402 0260010402
ETC
Unspecified
Description : 2.54mm (.100") Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 4 Circuits

[Molex]

Description: 2.54mm (.100") Pitch Board-to-Board Ribbon Cable Jumper - 24 AWG, Solid Tinned, 4 Circuits, Kinked Tails, 0.051m (2.00") Length

Description : Adaptive Cable Equalizer

HD-LINX®II Adaptive Cable Equalizer

Description
The GS1524A is a second-generation high-speed bipolar integrated circuit designed to equalize and restore signals received over 75Ω co-axial Cable.
The GS1524A is designed to support SMPTE 292M, SMPTE 344M and SMPTE 259M, and is optimized for performance at 270Mb/s and 1.485Gb/s.
The GS1524A features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The device also incorporates a Cable Length Indicator (CLI) that provides an indication of the amount of Cable being equalized for data rates up to 360Mb/s.

Features
• SMPTE 292M, SMPTE 344M and SMPTE 259M compliant
• Automatic Cable equalization
• Multi-standard operation from 143Mb/s to 1.485Gb/s
• Supports DVB-ASI at 270Mb/s
• Pb-free and RoHS Compliant
• Pin compatible with the GS9064 Cable Equalizer
• Manual bypass (useful for low data rates with slow rise/fall times)
• Performance optimized for 270Mb/s and 1.485Gb/s
• Typical maximum equalized length of Belden 1694A Cable: 140m at 1.485Gb/s, 350m at 270Mb/s
• 50Ω differential output (with internal 50Ω pull-ups)
• Manual output mute or programmable mute based on max Cable length adjust
Cable length indicator for SMPTE 259M inputs
• Single 3.3V power supply operation
• Operating temperature range: 0°C to +70°C

Applications
• SMPTE 292M, SMPTE 344M and SMPTE 259M Coaxial Cable Serial Digital Interfaces.

Description : CMOS Ionization Smoke Detector ASIC with Interconnect, Timer Mode and Alarm Memory

Description
The RE46C162/163 devices are low-power, CMOS ionization type, smoke detector ICs. With few external components, these circuits will provide all the required features for an ionization type smoke detector.
An internal oscillator strobes power to the smoke detection circuitry for 10.5 ms every 1.67 seconds to keep standby current to a minimum. A check for a low battery condition is performed every 40 seconds when in standby. The temporal horn pattern supports the NFPA 72 emergency evacuation signal.
An Interconnect pin allows multiple detectors to be connected so when one unit alarms, all units will sound. A charge dump feature will quickly discharge the Interconnect line when exiting a local alarm. The Interconnect input is also digitally filtered.

Features
• Pin Selectable Horn Patterns
• Alarm Memory
• Sensitivity Control Timer:
   - 8 minute Timer for RE46C162
   - 1 minute Timer for RE46C163
• >1500V ESD Protection (HBM) on All Pins
• Guard Outputs for Ion Detector Input
• ±0.75 pA Detect Input Current
• Internal Reverse Battery Protection
• Low Quiescent Current Consumption (<6.5 µA)
• I/O Filter and Charge Dump
• Internal Low Battery Detection
• Power-up Low Battery Test
Interconnect up to 66 Detectors
• RoHS Compliant, Lead Free Packaging

Part Name(s) : 10180-6000EC
ETC
Unspecified
Description : 3M™ Mini D Ribbon (MDR) Connectors

[3M]

3M™ Mini D Ribbon (MDR) Connectors
.050 Plastic Shielded Junction Shell for Round Cable

• Durable two piece plastic over two piece metal junction shell for straight round Cable (compatible with 101XX-6000 EC plug)
• Quick release latching
• Contacts: 50, 68 and 80
• See Regulatory Information Appendix (RIA) for chemical compliance information.

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]