datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : PI5V330
TGS
Tiger Electronic
Description : QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE PI5V330

DESCRIPTION
The PI5V330 VIDEO SWITCH is a 4-bit 1-of-2 multiplexer/de-multiplexer WITH a single SWITCH-enable (EN) input. When EN is LOW, the SWITCH is enabled and the D port is connected to the S port. When EN is high, the SWITCH is disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data path of the multiplexer/de-multiplexer.
The PI5V330 offers a high-performance, LOW-cost solution to SWITCH between VIDEO sources. LOW ON-RESISTANCE and wide bandwidth make it ideal for VIDEO and other applications. Also this device has exceptionally high current capability which is far greater than most analog SWITCHes offered today. A single 5V supply is all that is required for operation.

FEATURES
● High-performance, LOW-cost solution to SWITCH between VIDEO sources
● Wide bandwidth: 200 MHz
LOW ON-RESISTANCE: 3Ω
LOW crosstalk at 10 MHz: . -58 dB
● Ultra-LOW quiescent power (0.1 µA typical)
● Single supply operation: +5.0V
● Fast SWITCHing: 10 ns
● High-current output: 100 mA
● Packages available: SOP16,SSOP16,TSSOP16,DFN16

Diodes
Diodes Incorporated.
Description : Precision, WIDE-BANDWIDTH QUAD SPDT Analog SWITCH

Description
The PI5A100 is an improved QUAD Single-pole double-throw (4SPDT) CMOS analog SWITCH designed to operate WITH a single +2V to +6V power supply. The EN pin may be used to place all SWITCHes in a high-impedance state. This high precision device is ideal for LOW-distortion audio, VIDEO, and data SWITCHing and routing.
Each SWITCH conducts current equally well in either direction when on. In the off state each SWITCH blocks voltages up to the power supply rails.

Features
► Single Supply Operation (+2V to +6V)
► Rail-to-Rail Analog Signal Dynamic Range
LOW On-RESISTANCE (6Ω typ WITH 5V supply) Minimizes Distortion and Error Voltages
► On-RESISTANCE Matching Between Channels, 0.4Ω Typ.
► On-RESISTANCE Flatness, <2Ω Typ.
LOW Charge Injection Reduces Glitch Errors, Q = 6pC Typ.
► Replaces Mechanical Relays
► High Speed. tON, 8ns Typ.
LOW Crosstalk: -100dB @ 10 MHz
LOW Off-Isolation: -57dB @ 10 MHz
► Wide -3dB Bandwidth: 230 MHz
► High-Current Channel Capability: >100mA
► TTL/CMOS Logic Compatible
LOW Power Consumption (0.5µW typ.)
► Packaging (Pb-free & Green Available):
    -16-pin SOIC (W)
    -16-pin QSOP (Q)

Applications
➤ Audio, VIDEO SWITCHing and Routing
➤ LAN SWITCHes
➤ Telecommunication Systems
➤ Battery-Powered Systems

Pericom-Semiconductor
Pericom Semiconductor
Description : Precision, WIDE-BANDWIDTH QUAD SPDT Analog SWITCH

Description
The PI5A100 is an improved QUAD Single-pole double-throw (4SPDT) CMOS analog SWITCH designed to operate WITH a single +2V to +6V power supply. The EN pin may be used to place all SWITCHes in a high-impedance state. This high precision device is ideal for LOW-distortion audio, VIDEO, and data SWITCHing and routing.

Features
• Single Supply Operation (+2V to +6V)
• Rail-to-Rail Analog Signal Dynamic Range
LOW On-RESISTANCE (6Ω typ WITH 5V supply) Minimizes Distortion and Error Voltages
• On-RESISTANCE Matching Between Channels, 0.4Ω Typ.
• On-RESISTANCE Flatness, <2Ω Typ.
LOW Charge Injection Reduces Glitch Errors, Q = 6pC Typ.
• Replaces Mechanical Relays
• High Speed. tON, 8ns Typ.
LOW Crosstalk: -100dB @ 10 MHz
LOW Off-Isolation: -57dB @ 10 MHz
• Wide -3dB Bandwidth: 230 MHz
• High-Current Channel Capability: >100mA
• TTL/CMOS Logic Compatible
LOW Power Consumption (0.5µW typ.)
• Packaging (Pb-free & Green Available):
    -16-pin QSOP (Q)
    -16-pin SOIC (W)

Applications
• Audio, VIDEO SWITCHing and Routing
• LAN SWITCHes
• Telecommunication Systems
• Battery-Powered Systems

Pericom-Semiconductor
Pericom Semiconductor
Description : LOW On-RESISTANCE Wideband/VIDEO QUAD WITH Individual Control

Description:
Pericom Semiconductor’s PI5V332 is a true bidirectional QUAD VIDEO SWITCH that is recommended for RGB, S-VIDEO, or composite VIDEO SWITCHing applications. The individual controls alLOW for VIDEO, Hsync, or Vsync enable or disable. The SWITCH can be driven from a current output RAMDAC or voltage output composite VIDEO source.

Features:
• High-performance, LOW-cost solution to SWITCH between VIDEO sources
• Wide bandwidth: 250 MHz
LOW On-RESISTANCE: 3Ω
LOW crosstalk at 10 MHz: –58 dB
• Ultra-LOW quiescent power (0.1µA typical)
• Single supply operation: +5.0V
• Fast SWITCHing: 10ns
• High-current output: 100mA
• Functionally equivalent to QS4A101
• Packaging (Pb-free & Green available):
    – 16-pin 150-mil wide plastic QSOP (Q)
    – 16-pin 150-mil wide plastic SOIC (W)

PERICOM
Pericom Semiconductor Corporation
Description : LOW On-RESISTANCE Wideband/VIDEO QUAD WITH Individual Control

Description:
Pericom Semiconductor’s PI5V332 is a true bidirectional QUAD VIDEO SWITCH that is recommended for RGB, S-VIDEO, or composite VIDEO SWITCHing applications. The individual controls alLOW for VIDEO, Hsync, or Vsync enable or disable. The SWITCH can be driven from a current output RAMDAC or voltage output composite VIDEO source.

Features:
• High-performance, LOW-cost solution to SWITCH between VIDEO sources
• Wide bandwidth: 250 MHz
LOW On-RESISTANCE: 3Ω
LOW crosstalk at 10 MHz: –58 dB
• Ultra-LOW quiescent power (0.1µA typical)
• Single supply operation: +5.0V
• Fast SWITCHing: 10ns
• High-current output: 100mA
• Functionally equivalent to QS4A101
• Packaging (Pb-free & Green available):
    – 16-pin 150-mil wide plastic QSOP (Q)
    – 16-pin 150-mil wide plastic SOIC (W)

Pericom-Semiconductor
Pericom Semiconductor
Description : LOW On-RESISTANCE Wideband/VIDEO QUAD 2-Channel Mux/DeMux

Description
Pericom Semiconductor’s PI5V330S is a true bidirectional QUAD 2-channel multiplexer/demultiplexer recommended for both RGB and composite VIDEO SWITCHing applications. The VIDEO SWITCH can be driven from a current output RAMDAC or voltage output composite VIDEO source.

Features
• High-performance solution to SWITCH between VIDEO sources
• Wide bandwidth: 570 MHz (typical)
LOW On-RESISTANCE: 5Ω (typical)
LOW crosstalk at 10 MHz: –80dB
• Ultra-LOW quiescent power (0.1µA typical)
• Single supply operation: +5.0V
• Fast SWITCHing: 10ns
• ESD > 5KV HBM, 10KV I/O to GND
• Packaging (Pb-free & Green Available):
    – 16-pin 150-mil wide plastic SOIC (W)
    – 16-pin 150-mil wide plastic QSOP (Q)

PERICOM
Pericom Semiconductor Corporation
Description : LOW On-RESISTANCE Wideband/VIDEO QUAD 2-Channel Mux/DeMux

Description
Pericom Semiconductor’s PI5V330 is a true bidirectional QUAD 2-channel multiplexer/demultiplexer recommended for both RGB and composite VIDEO SWITCHing applications. The VIDEO SWITCH can be driven from a current output RAMDAC or voltage output composite VIDEO source.

Features
• High-performance solution to SWITCH between VIDEO sources
• Wide bandwidth: 400 MHz (typical)
LOW On-RESISTANCE: 5Ω (typical)
LOW crosstalk at 10 MHz: –56dB
• Ultra-LOW quiescent power (0.1µA typical)
• Single supply operation: +5.0V
• Packaging (Pb-free & Green Available):
    – 16-pin 150-mil wide plastic SOIC (W)
    – 16-pin 150-mil wide plastic QSOP (Q)

Part Name(s) : DG2016DQ
Vishay
Vishay Semiconductors
Description : High-Bandwidth, LOW Voltage, Dual SPDT Analog SWITCH

DESCRIPTION
The DG2016 is a monolithic CMOS dual single-pole/double-throw (SPDT) analog SWITCH. It is specifically designed for LOW-voltage, high bandwidth applications.

FEATURES
● Single Supply (1.8 V to 5.5 V)
LOW On-RESISTANCE - rON: 2.4 Ω
● Crosstalk and Off Isolation: -81 dB @ 1 MHz
● MSOP-10 Package

BENEFITS
● Reduced Power Consumption
● High Accuracy
● Reduce Board Space
LOW-Voltage Logic Compatible
● High Bandwidth

APPLICATIONS
● Cellular Phones
● Speaker Headset SWITCHing
● Audio and VIDEO Signal Routing
● PCMCIA Cards
LOW-Voltage Data Acquisition
● ATE

Part Name(s) : DG2032 DG2032DN
Vishay
Vishay Semiconductors
Description : High-Bandwidth, LOW Voltage, Dual SPDT Analog SWITCH

DESCRIPTION
The DG2032 is a monolithic CMOS dual single-pole/double-throw (SPDT) analog SWITCH. It is specifically designed for LOW-voltage, high bandwidth applications.

FEATURES
• Single Supply (1.8 V to 5.5 V)
LOW On-RESISTANCE - rON: 2.4 Ω
• Crosstalk and Off Isolation: -81 dB @ 1 MHz
• QFN-12 (3 x 3 mm) Package

BENEFITS
• Reduced Power Consumption
• High Accuracy
• Reduce Board Space
LOW-Voltage Logic Compatible
• High Bandwidth

APPLICATIONS
• Cellular Phones
• Speaker Headset SWITCHing
• Audio and VIDEO Signal Routing
• PCMCIA Cards
LOW-Voltage Data Acquisition
• ATE

Description : LOW On-RESISTANCE Wideband/VIDEO QUAD 2-Channel Mux/DeMux

Description:
Pericom Semiconductor’s PI5V330A is a true bidirectional QUAD 2-channel multiplexer/demultiplexer that is recommended for both RGB and composite VIDEO SWITCHing applications. The VIDEO SWITCH can be driven from a current output RAMDAC or voltage output composite VIDEO source.
   
Features:
• High-performance solution to SWITCH between VIDEO sources
• Wide bandwidth: >360 MHz
LOW On-RESISTANCE: 3Ω
LOW crosstalk at 10 MHz: –58dB
• Ultra-LOW quiescent power (0.1µA typical)
• Single supply operation: +5.0V
• Fast SWITCHing: 10ns
• High-current output: 100mA
• Packaging (Pb-free & Green available):
    – 16-pin 300-mil wide plastic SOIC (S)
    – 16-pin 150-mil wide plastic SOIC (W)
    – 16-pin 150-mil wide plastic QSOP (Q)
   

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]