datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : NTCLE213E3
Vishay Semiconductors
Vishay Semiconductors
Description : NTC Thermistor, Epoxy Coated Mini Sensor (Rev - 2015)

FEATURES
• Advanced NTC technology
• Temperature range from -55 °C to +150 °C
• Highly resistant to thermal shocks
• Small body diameter of max. 2.5 mm
• Fast response time
• High sensitivity
• Delivery in bulk or in tape with extra long leads
   (for automatic mounting)
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

APPLICATIONS
   Temperature sensing, control and compensation.
   E.g. inlet air temperature sensing thermistors or ECT in
   automotive applications, Sensor elements in industrial and
   commercial applications, heating systems and industrial
   systems.

Part Name(s) : NTCLE213E3
Vishay Semiconductors
Vishay Semiconductors
Description : NTC Thermistor, Epoxy Coated Mini Sensor

DESCRIPTION
These negative temperature coefficient thermistors consist of a Mini-chip soldered between two tin plated 0.4 mm nickel leads, Coated with ocher colored Epoxy lacquer and coded with a color dot.

FEATURES
• Advanced NTC technology
• Temperature range from -55 °C to +150 °C
• Highly resistant to thermal shocks
• Small body diameter of max. 2.5 mm
• AEC-Q200 qualified
• Fast response time
• High sensitivity
• Delivery in bulk or in tape with extra long leads
   (for automatic mounting)
• Mounting: radial
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

APPLICATIONS
   Temperature sensing, control and compensation.
   E.g. inlet air temperature sensing thermistors or ECT in
   automotive applications, Sensor elements in industrial and
   commercial applications, heating systems and industrial
   systems.

Part Name(s) : RL0703-624-73-MS
Unspecified
Unspecified
Description : Epoxy Coated THERMISTOR

[THERMOMETRICS, INC.]

DESCRIPTION:
Epoxy Coated point-matched disc thermistors with .010" nickel PTFE insulated lead-wires.

FEATURES:
• Low cost solid state Sensor
• Standard resistance tolerances down to ±2%
• High sensitivity to changes in temperature
• Suitable for temperature measurement,
   control and compensation
• Excellent mechanical strength
• Wide operating temperature range: -50°C to 150°C
• Suitable for PCB and probe mountings
• Available in a wide range of material systems
• Overall lengths from 18mm to 78mm
   (0.71" to 3.07")

Part Name(s) : RL0703-624-73-MS
Amphenol Aerospace
Amphenol Aerospace
Description : Thermometrics Epoxy-Coated Thermistor

Description
Epoxy-Coated point-matched disc thermistors with 0.01 in (0.254 mm) nickel PTFE insulated lead-wires.

Features
• Low cost, solid state temperature Sensor
• High sensitivity to changes in temperature
• Suitable for temperature measurement,
   control and compensation
• Standard resistance tolerances down to ±2%
• Excellent mechanical strength
• Wide operating temperature range: -58°F to
   300°F (-50°C to 150°C)
• Suitable for PCB and probe mountings
• Available in a wide range of material systems
• Overall lengths from 0.71 in to 3.07 in (18 mm
   to 78 mm)

Part Name(s) : C100F202F
Amphenol Aerospace
Amphenol Aerospace
Description : Thermometrics Epoxy-Coated Chip Thermistor

Description
Epoxy-Coated chip thermistors with 0.012 in (0.3 mm) bare tinned-copper lead-wires.

Features
• Low cost, solid state temperature Sensor
• Suitable for use over range of -112°F to 302°F
   (–80°C to 150°C)
• High sensitivity greater than –4% /°C at 77°F
   (25°C)
• Suitable for temperature measurement,
   control and compensation
• High reliability and stability
• Resin Coated for good mechanical strength
   and resistance to solvents

Part Name(s) : B57153
EPCOS AG
EPCOS AG
Description : NTC thermistors for inrush current limiting

Features

■ Useable in series connections up to 265 VRMS

Coated thermistor disk

■ Cost-effective NTC for low-power applications

■ Kinked leads of tinned copper wire

■ Small size

■ UL approval (E69802)



Applications

■ Switch-mode power supplies



 


Part Name(s) : B57153S0
EPCOS AG
EPCOS AG
Description : NTC thermistors for inrush current limiting

Features

■ Useable in series connections up to 265 VRMS

Coated thermistor disk

■ Cost-effective NTC for low-power applications

■ Kinked leads of tinned copper wire

■ Small size

■ UL approval (E69802)



Applications

■ Switch-mode power supplies



 


Part Name(s) : NTC5D-7
Unspecified
Unspecified
Description : NTC THERMISTOR

FEATURES

Small in size,high-powered, and very capable of bringing

down the surge current;

Quick in reaction;

High in B value and low in residual current;

Long service life and high reliability;

High coefficient of safety and wide range of application.


Part Name(s) : IRPT1053A
International Rectifier
International Rectifier
Description : Power Module for 1 hp Motor Drives

The IRPT1053A Power Module, shown in figure 1, is a chip and wire Epoxy encapsulated module. It houses input rectifiers output inverter, current sense shunts and NTC thermistor. The 3- phase input bridge rectifiers are rated at 800V. The inverter section employs 600V, short circuit rated, ultrafast IGBTs and ultrafast freewheeling diodes. Current sensing is achieved through 45mΩ low inductance shunts provided in the positive and negative DC bus rail. The NTC thermistor provides temperature sensing capability. The lead spacing on the power module meets UL840 pollution level 3 requirements.

• 1 hp (0.75kW) power output Industrial rating at 150% overload for 1 minute
• 180 - 240V AC input, 50/60Hz
• 3-phase rectifier bridge
• 3-phase ultrafast IGBT inverter
• HEXFRED ultrafast soft recovery freewheeling diodes
• Low inductance (current sense) shunts in positive and negative DC rail
NTC temperature Sensor
• Pin-to-base plate isolation 2500V rms
• Easy-to-mount two-screw package
• Case temperature range -25°C to 125°C operational

Part Name(s) : IRPT1057A
International Rectifier
International Rectifier
Description : Power Module for 0.75 hp Motor Drives

The IRPT1057A Power Module
The IRPT1057A Power Module, shown in figure 1, is a chip and wire Epoxy encapsulated module. It houses input rectifiers, output inverter, current sense shunts and NTC thermistor. The 3-phase input bridge rectifiers are rated at 800V. The inverter section employs 600V, short circuit rated, ultrafast IGBTs and ultrafast freewheeling diodes. Current sensing is achieved through 75 mΩ low inductance shunts provided in the positive and negative DC bus rail. The NTC thermistor provides temperature sensing capability. The lead spacing on the power module meets UL840 pollution level 3 requirements.

• 0.75 hp (0.56kW) power output Industrial rating at 150% overload for 1 minute
• 180-240V AC input, 50/60 Hz
• 3-phase rectifier bridge
• 3-phase, short circuit rated, ultrafast IGBT inverter
• HEXFRED ultrafast soft recovery freewheeling diodes
• Low inductance (current sense) shunts in positive and negative DC rail
NTC temperature Sensor
• Pin-to-baseplate isolation 2500V rms
• Easy-to-mount two-screw package
• Case temperature range -25°C to 125°C operational

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]