P/N + Description + Content Search

DESCRIPTION
The TSMP6000 is a miniaturized Sensor for receiving various kinds of modulated IR signals. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
   data formats
• Improved shielding against electrical field
   disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device
   works in the range between 2.0 V and 5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP1138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 55 kHz, all
   data formats
• If the IR singal strength is less then 300 mW/m2
   (distance more than 0.6 m with a typical IR
   Remote Control), the frequency range is up to
   60 kHz
• Improved shielding against electrical field
   disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP4138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A pin diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 50 kHz, all
   data formats
• If the IR signal strength is less then 2 W/m2
   (distance more than 0.2 m with a typical IR
   Remote Control), the frequency range is up to
   55 kHz
• If the IR signal strength is less than 15 mW/m2
   (distance more than 2.5 m with a typical IR
   Remote Control), the frequency range is up to
   60 kHz
• Improved shielding against electrical field disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP4138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A pin diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 60 kHz, all
   data formats
• If the IR signal strength is more then 600 mW/m2
   (distance less than 0.45 m with a typical IR
   Remote Control), the frequency range is limited to
   55 kHz
• Improved shielding against electrical field
   disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP58138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 55 kHz, all
   data formats
• If the IR signal strength is less than 500 mW/m2
   (distance more than 0.5 m with a typical IR
   Remote Control), the frequency range is up to
   60 kHz
• Improved shielding against electrical field
   disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP77000 is a two lens miniaturized Sensor for receiving various kinds of modulated IR signals. Two PIN diodes and a preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
   data formats
• Improved shielding against electrical field
   disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the
   device works in the range between 2.0 V and
   5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP1138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 60 kHz, all
   data formats
• If the IR signal strength is more then 500 mW/m2
   (distance less than 0.5 m with a typical IR Remote
   control), the frequency range is limited to 55 kHz
• Improved shielding against electrical field
   disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP58000 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
   data formats
• Improved shielding against electrical field
   disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device
   works in the range between 2.0 V and 5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSMP58138 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 30 kHz to 60 kHz, all
   data formats
• If the IR signal strength is more than 1000 mW/m2
   (distance less than 0.35 m with a typical IR
   Remote Control), the frequency range is limited to
   55 kHz
• Improved shielding against electrical field
   disturbance
• AGC to suppress ambient noise
• High sensitivity, long receiving range
• Supply voltage: 2.5 V to 5.5 V
• Carrier out signal for IR repeater applications
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSOP98260 is a miniaturized Sensor for receiving the modulated signal of infrared Remote Control Systems. A PIN diode and preamplifier are assembled on a lead frame, the epoxy package is designed as an IR filter. The modulated output signal, carrier out, can be used for code learning applications.
This component has not been qualified according to automotive specifications.

FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
   data formats
• Improved shielding against electrical field
   disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage: 2.7 V to 5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912