Amphenol® AC Series industrial application threaded style connector
Designed with the industrial user in mind, for widely diverse applications such as mass transportation, automotive, heavy equipment and geophysical industries, and for the entertainment/ lighting industries, the new AC Series of Connectors offer the following features:
• Rugged aluminum shells • Durability and reliability • Environmentally acceptable shell plating options - • Conductive and non-conductive • SINGLE key/keyway shell polarization • Five shell styles in sizes 10SL to 40 • Threaded coupling • Various backshells • Resilient inserts - • Outstanding moisture barrier • High dielectric strength • High resistance to vibration • Over 275 insert patterns available • Alternate insert positioning • Machined contacts - • Maximum corrosion resistance • Maximum current capacity • Low millivolt drop • Solder and crimp contacts - silver plated or optional gold plating • General duty and environmental versions • –55° C to +125° C operating temp. range • Standard application tools
Description The MCP1811X/12X devices are 150 mA (MCP1811X) and 300 mA (MCP1812X) Low-Dropout (LDO) linear regulators that provide high-current and low-output voltages while maintaining an ultra-low 250 nA of quiescent current during device operation. In addition, the MCP1811B/12B can be shut down for 5 nA (typical) supply current draw. The MCP1811X/12X family comes in nine standard fixed output voltage versions: 1V, 1.2V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 4.0V.
Features • Ultra-Low Quiescent Current: 250 nA (typical) • Ultra-Low Shutdown Supply Current: - 10 nA typical for MCP1811A/12A - 5 nA typical for MCP1811B/12B • Output Current Capability: - 150 mA for MCP1811X (Note 1) - 300 mA for MCP1812X • Input Voltage Range: 1.8V to 5.5V • Standard Output Voltages (VR): 1V, 1.2V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 4.0V; for any other voltage options (between 1V to 4V), please contact your local sales office • Stable with Ceramic Output Capacitor: 1.0 μF (MCP1811X) and 2.2 μF (MCP1812X) • Overcurrent Protection • Output Discharge (Shutdown MODe, SHDN = GND) MCP1811A/12A • Available for the Following Packages: - 3-Lead SOT-23 - 3-Lead SC70 - 4-Lead 1 x 1 mm UDFN - 5-Lead SOT-23 - 5-Lead SC70
Features ■ Conductive plastic ■ PC board and bushing mount ■ Plastic bushing and plastic shaft ■ Withstands typical industrial washing processes ■ Compact package saves board and panel space ■ Audio taper versions available as special order ■ RoHS compliant versions available*
DESCRIPTION The DS2761 high-precision Li+ battery monitor is a data-acquisition, information-storage, and safety protection device tailored for cost-sensitive battery pack applications. This low-power device integrates precise temperature, voltage, and current measurement, nonvolatile (NV) data storage, and Li+ protection into the small footprint of either a TSSOP package or flip-chip package. The DS2761 is a key component in applications including remaining capacity estimation, safety monitoring, and battery-specific data storage.
FEATURES ■ Lithium-Ion (Li+) Safety Circuit - Overvoltage Protection - Overcurrent/Short-Circuit Protection - Undervoltage Protection ■ Zero Volt Battery Recovery Charge ■ Available in Two Configurations: - Internal 25mΩ Sense Resistor - External User-Selectable Sense Resistor ■ Current Measurement - 12-Bit Bidirectional Measurement - Internal Sense Resistor Configuration: 0.625mA LSB and ±1.9A Dynamic Range - External Sense Resistor Configuration: 15.625μV LSB and ±64mV Dynamic Range ■ Current Accumulation: - Internal Sense Resistor: 0.25mAhr LSB - External Sense Resistor: 6.25μVhr LSB ■ Voltage Measurement with 4.88mV Resolution ■ Temperature Measurement Using Integrated Sensor with 0.125°C Resolution ■ System Power Management and Control Feature Support ■ 32 Bytes of Lockable EEPROM ■ 16 Bytes of General-Purpose SRAM ■ Dallas 1-Wire® Interface with Unique 64-bit Device Address ■ Low Power Consumption: - Active Current: 60μA typ, 90μA max - Sleep Current: 1μA typ, 2μA max