datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
ETC
Unspecified
Description : kinds of single Relays , Power Relays , automotive Relays ...lays , pc-board Relays , plug-in Relays , PCB Relays , miniature Relays

kinds of single Relays , Power Relays , automotive Relays ...lays , pc-board Relays , plug-in Relays , PCB Relays , miniature Relays

Description : Power PCB Relay RT1

General Purpose Relays PCB Relays
Power PCB Relay RT1

■ 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
■ DC or AC coil
■ 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature 85°C (DC coil)
■ WG version: product in accordance to IEC 60335-1
■ Reflow version: for THR (Through-Hole Reflow) soldering process

Typical applications
   Boiler control, timers, garage door control, POS automation, interface modules

Description : PNP Silicon General Purpose Amplifier Transistor

This PNP Silicon Epitaxial Planar Transistor is designed for General Purpose amplifier applications. This device is housed in the SC–70/SOT–323 package which is designed for low Power surface mount applications.

• High hFE, 210–460
• Low VCE(sat), < 0.5 V
• Available in 8 mm, 7–inch/3000 Unit Tape and Reel

Description : 2c 15A, 4c 10A polarized Power Relays SP Relays

SP Relays 2c 15A, 4c 10A polarized Power Relays

FEATURES
1. Small, slim form factor
   Facilitating the form factor reduction of devices, the overall height of the Relay package is less than half that of our HP Relay.
2. High sensitivity
   The high-efficiency polarized electromagnetic mechanism in conjunction with our exclusive spring alignment method achieves levels of sensitivity higher than Relays that have been available up to now. For both the 2 Form C and 4 Form C single side stable and 2 coil latching types, the 150 mW minimum operating Power level allows direct driving by transistor or chip controllers.
3. High reliability and long life
   With a structure that ensures almost perfectly complete twin contact and minimal contact bounce, you get greater reliability than has so far been provided by Power Relays.
4. Latching types also available
   1 coil latching and 2 coil latching types are available. In cases where it was formerly unavoidable to use pluralRelays for large Power memory, you can now use a single SP Relay.
5. Strong resistance to vibration and shock
   Our balanced armature technology well withstands vibration and shocks. It provides strong resistance to vibration and shock.
6. Terminals and mounting boards are available.

Description : InGaP HBT Gain Block

Product Description
The ECG002 is a General-Purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1000 MHz, the ECG002 typically provides 20 dB of gain, +29 dBm Output IP3, and +15.5 dBm P1dB.

Product Features
• DC – 6 GHz
• +15.5 dBm P1dB at 1 GHz
• +29 dBm OIP3 at 1 GHz
• 20 dB Gain at 1 GHz
• 3.8 dB Noise Figure
• Available in lead-free/green SOT-86, SOT-363, & SOT-89 package styles
• Internally matched to 50 Ω

Applications
• Mobile Infrastructure
• CATV / FTTX
• W-LAN / ISM
• RFID
• WiMAX / WiBro

Description : AUTOMOTIVE Relays

Twin Relays EN2/EP2 Series
Single Relays EP1/MR301 Series

DESCRIPTION
The EN2, EP2, EPI and MR301 series Power Relays can meet the requirements of high quality and reliability in automotive eIectronics applications. The EN2 and EP2 series are the twin Relays which have two units in one package and smaller than conventional two Relays. These Relays are divided into two types for different usage. One is H bridge type and the other is separate type. The EN2 series is suitable for heavy load applications (35 A max.). The EP2 series is designed for medium load applications (25 A max.). The EP1 and MR301 series are the 1C contact form Relays. Many of these Relays have been used in automotive electronics applications throughout the world

 

 

Description : 0.4mm pitch PCB to PCB Connector

[LS MTRON]

GB042 series
0.4mm pitch PCB to PCB Connector

Features
• GB042 series Connector is 0.4 mm pitch, low profile PCB to PCB SMT type
   connector.
• Improved contact reliability with plug and receptacle contacting at 2 point
   simultaneously.
• Stable unmating mechanism preventing receptacle contact from being deformed.

Applications
• Mobile phone
• Compact portable devices, etc

GB044 series
0.4mm pitch PCB to PCB Connector

Features
• GB044 Series Connector is 0.4 mm pitch, low profile PCB to PCB SMT Type
   Connector
• Improved contact reliability with plug and receptacle contacting at 2 point
   simultaneously.
• Stable unmating mechanism preventing receptacle contact from being
   deformed.
• The locking structures provided for the hold down improve the unmating force.

Applications
• Mobile phone
• Compact portable devices, etc

Description : General Purpose Relays Power PCB Relay RT1

■ 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
■ DC or AC coil
■ 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature 85°C (DC coil)
■ WG version: product in accordance to IEC 60335-1
■ Reflow version: for THR (Through-Hole Reflow) soldering process

Description : General Purpose Relays Power PCB Relay RT1-AP

1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
Sensitive coil 400mW
5kV/10mm coil-contact, reinforced insulation
Ambient temperature 85°C
WG version: product in accordance to IEC 60335-1

Description : General Purpose Relays PCB Relays Power PCB Relay RT2

2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts
Sensitive coil 400mW
5kV/10mm coil-contact, reinforced insulation
Ambient temperature 85°C

Typical applications
Boiler control, timers, garage door control, POS automation, interface modules

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]