datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
ETC
Unspecified
Description : kinds of single Relays , power Relays , automotive Relays ...lays , pc-board Relays , plug-in Relays , PCB Relays , miniature Relays

kinds of single Relays , power Relays , automotive Relays ...lays , pc-board Relays , plug-in Relays , PCB Relays , miniature Relays

Description : AUTOMOTIVE Relays

Twin Relays EN2/EP2 Series
Single Relays EP1/MR301 Series

DESCRIPTION
The EN2, EP2, EPI and MR301 series power Relays can meet the requirements of high quality and reliability in automotive eIectronics applications. The EN2 and EP2 series are the twin Relays which have two units in one package and smaller than conventional two Relays. These Relays are divided into two types for different usage. One is H bridge type and the other is separate type. The EN2 series is suitable for heavy load applications (35 A max.). The EP2 series is designed for medium load applications (25 A max.). The EP1 and MR301 series are the 1C contact form Relays. Many of these Relays have been used in automotive electronics applications throughout the world

 

 

Description : 2c 15A, 4c 10A polarized power Relays SP Relays

SP Relays 2c 15A, 4c 10A polarized power Relays

FEATURES
1. Small, slim form factor
   Facilitating the form factor reduction of devices, the overall height of the relay package is less than half that of our HP relay.
2. High sensitivity
   The high-efficiency polarized electromagnetic mechanism in conjunction with our exclusive spring alignment method achieves levels of sensitivity higher than Relays that have been available up to now. For both the 2 Form C and 4 Form C single side stable and 2 coil latching types, the 150 mW minimum operating power level allows direct driving by transistor or chip controllers.
3. High reliability and long life
   With a structure that ensures almost perfectly complete twin contact and minimal contact bounce, you get greater reliability than has so far been provided by power Relays.
4. Latching types also available
   1 coil latching and 2 coil latching types are available. In cases where it was formerly unavoidable to use pluralRelays for large power memory, you can now use a single SP relay.
5. Strong resistance to vibration and shock
   Our balanced armature technology well withstands vibration and shocks. It provides strong resistance to vibration and shock.
6. Terminals and mounting boards are available.

Description : WILMAR™ Protective Relays – 700 Series w/ Adjustable Time Delay

Reverse Power Relays

Several types of Reverse Power Relays are available including Relays sensitive to reverse reactive power (KVAR). WILMAR is the leading brand of reverse power Relays. Our rugged sealed construction provides continuous and reliable operation unaffected by shock, vibration or other severe environments. Reverse Power Relays are used for the protection of generator sets operating in parallel.

Description : Miniature Relays

The NEC TOKIN’s Miniature Relays have evolved in response to various demands.

Communication equipment, measurement instrument, FA equipment, electric home appliances and automotive electronics, and all the rest. In line with the increasing range of functions and downsizing of the various equipments, miniature Relays have to respond to the demands of not only high performance and reliability, but also downsizing, low profile and environment resistance.
NEC TOKIN uses the state-of-the-art technologies based on the integration of mechatronics and electronics, and has timely released excellent products. These are Miniature Signal Relays and Power Relays. They are ultra miniature and lightweight, and are suitable for high density packaging. In 2009 NEC TOKIN reached the 4 billion mark in the number of Relays shipped and is updating the record daily now.

NEC TOKIN provides the best-seller products already used for various applications, and variety of products such as a flat type for low profile mounting, a slim type for high density mounting, low power consumption type and excellent environment resistance type.

<Feature>
• Compact, lightweight, ultra-low profile with high density
• The low power consumption
• Extremely durable plastic sealing
• Small but high withstanding voltage
• Lineup of SMTs (surface mount type) also available

Description : General Purpose Relays Force Guided Relays

Force Guided Relay SR6 A/B/C/V

■ 6 pole relay with force guided contacts according to EN 50205
■ Reinforced insulation between all contacts

Typical applications
  Emergency shut-off, press control, machine control, elevator and escalator control, safety Relays

 

Description : General Purpose Relays Industrial Relays

R10 Series Panel Plug-in Relay

■ 1 through 8 form C (CO) contact arrangement
■ Broad range of coil options provides sensitivity ranging from 25 to 750mW
■ Various contacts switch from dry circuit to 7.5 amps
■ Many mounting and termination options

Typical applications
  Coin changers, audio equipment, elevators, traffic controls, ultrasonic test equipment, parking toll readers

 

Clare
Clare Inc => IXYS
Description : Dual Pole OptoMOS® Relays

Description
LAA110L is a Dual 1 Form-A solid state relay that has two independently controlled optically coupled MOSFETs with an additional current limiting circuit. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750 VRMS of input to output isolation. The optically coupled inputs are controlled by highly efficient GaAIAs infrared LEDs. Dual pole OptoMOS Relays provide a more compact design solution than discrete single pole Relays in a variety of applications. The dual pole Relays save board space by incorporating both Relays in a single 8-pin package.

Features
• Small 8 Pin DIP Package
• Current Limit
• Low Drive Power Requirements (TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available

Applications
• Telecom Switching
    • Tip/Ring Circuits
    • Modem Switching (Laptop, Notebook, Pocket Size)
    • Hookswitch
    • Dial Pulsing
    • Ground Start
    • Ringer Injection
• Instrumentation
    • Multiplexers
    • Data Acquisition
    • Electronic Switching
    • I/O Subsystems
    • Meters (Watt-Hour, Water, Gas)
    • Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
Industrial Controls

Clare
Clare Inc => IXYS
Description : Single Pole OptoMOS® Relays

Description
LAA126L is a Dual 1 Form-A solid state relay that has two independently controlled optically coupled MOSFETs with an additional current limiting circuit. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750 VRMS of input to output isolation. The optically coupled inputs are controlled by highly efficient GaAIAs infrared LEDs. Dual pole OptoMOS Relays provide a more compact design solution than discrete single pole Relays in a variety of applications. The dual pole Relays save board space by incorporating both Relays in a single 8-pin package.

Features
• Small 8 Pin DIP Package
• Current Limit
• Low Drive Power Requirements (TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available

Applications
• Telecommunications
    • Telecom Switching
    • Tip/Ring Circuits
    • Modem Switching (Laptop, Notebook, Pocket Size)
    • Hookswitch
    • Dial Pulsing
    • Ground Start
    • Ringer Injection
• Instrumentation
    • Multiplexers
    • Data Acquisition
    • Electronic Switching
    • I/O Subsystems
    • Meters (Watt-Hour, Water, Gas)
    • Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
Industrial Controls

Clare
Clare Inc => IXYS
Description : Single Pole OptoMOS® Relays

Description
LBA126L is a Dual 1 Form-A solid state relay that has two independently controlled optically coupled MOSFETs with an additional current limiting circuit. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750 VRMS of input to output isolation. The optically coupled inputs are controlled by highly efficient GaAIAs infrared LEDs. Dual pole OptoMOS Relays provide a more compact design solution than discrete single pole Relays in a variety of applications. The dual pole Relays save board space by incorporating both Relays in a single 8-pin package.

Features
• Small 8 Pin DIP Package
• Current Limit
• Low Drive Power Requirements (TTL/CMOS Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available

Applications
• Telecommunications
    • Telecom Switching
    • Tip/Ring Circuits
    • Modem Switching (Laptop, Notebook, Pocket Size)
    • Hookswitch
    • Dial Pulsing
    • Ground Start
    • Ringer Injection
• Instrumentation
    • Multiplexers
    • Data Acquisition
    • Electronic Switching
    • I/O Subsystems
    • Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
Industrial Controls

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]