datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : VSC7281 Vitesse
Vitesse Semiconductor
Description : DUAL XAUI ? SINGLE XGMII QUAD 0.95 GBPS TO 3.25 GBPS TRANSCEIVER View

GENERAL DESCRIPTION
The VSC7281 is a DUAL XAUISINGLE XGMII TRANSCEIVER tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
DUAL XAUI Serial Bus
SINGLE XGMII Parallel Bus
► 0.95 GBPS TO 3.25 GBPS QUAD SerDes/TRANSCEIVER
XAUI Compliant Retimer and Repeater Modes
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-TOChannel Alignment
► Received Data Aligned TO Local REFCLK or TO Recovered Clock
► TX and RX Rate Matching for FC, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-TO-Box Serial Communications
    - Copper, Coax, and Fiber
   

Part Name(s) : VSC7280 Vitesse
Vitesse Semiconductor
Description : DUAL XAUI ? DUAL XGMII Octal 0.95 GBPS TO 3.25 GBPS TRANSCEIVER View

GENERAL DESCRIPTION :
The VSC7280 is a DUAL XAUIDUAL XGMII TRANSCEIVERs tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
DUAL XAUI Serial Bus
DUAL XGMII Parallel Bus
► 0.95 GBPS TO 3.25 GBPS Octal SerDes/TRANSCEIVER
XAUI Compliant Retimer and Repeater Modes
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-TOChannel Alignment
► Received Data Aligned TO Local REFCLK or TO Recovered Clock
► TX and RX Rate Matching for XAUI, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTAG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-TO-Box Serial Communications
    - Copper, Coax, and Fiber
   

Part Name(s) : VSC8486 Vitesse
Vitesse Semiconductor
Description : 10 GBPS XAUI or XGMII TO XFI LAN/WAN TRANSCEIVER View


GENERAL DESCRIPTION:
The VSC8486 is a LAN/WAN XAUI or XGMII TRANSCEIVER that converts 3 GBPS XAUI data TO a 10 GBPS serial stream. At just 750 mW, the VSC8486 is ideal for applications requiring low power. The
device is also equipped with an additional full-rate data port that can be utilized for bypass moniTOring or channel moniTOring applications. The device meets all specifications for 10 Gigabit Ethernet (GbE) Layer-1 processing, as defined in IEEE 802.3ae.

Part Name(s) : TLK3138 TLK3138ZDU ETC
Unspecified
Description : DUAL XAUI TRANSCEIVER View

[TI]

DESCRIPTION
The TLK3138 is an eight channel serial TRANSCEIVER. It is compliant with the 10GBPS Ethernet XAUI specification. The TLK3138 provides 10 GBPS high-speed bi-directional point-TO-point data transmission. The primary application of this device is in backplanes and front panel connections requiring DUAL/redundant 10GBPS connections over controlled impedance media of approximately 50Ω. The transmission media can be printed circuit board (PCB) traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling inTO the lines.
The TLK3138 performs the parallel-TO-serial, serial-TO-parallel conversion, and clock extraction functions for a physical layer interface. The TLK3138 provides two complete XGXS/PCS functions defined in Clause 47/48 of the IEEE P802.3ae 10GBPS Ethernet standard. The serial transmitter is implemented using differential Current Mode Logic (CML) with integrated termination resisTOrs.

FEATURES
• Eight Channel 3.125 GBPS TRANSCEIVER
• Contains Two Complete IEEE P802.3ae-2002 10 GBPS Ethernet XGXS(1) (XAUI) Compliant Cores
XAUI (Serial side) Channel Redundancy Mode Support: Fast Switching from Primary TO Secondary XAUI/Channel with Provisionable Error Character or Local Fault Code Insertion at Switch Time
XGMII (Parallel side) Channel Redundancy Mode Support: Fast Switching from Primary TO Secondary XGMII/Channel with Provisionable Error Character or Local Fault Code Insertion at Switch Time
• Serial Side Transmit Pre-emphasis and Receive Adaptive Equalization TO Allow Extended Backplane Reach
• Selectable Full Duplex Serial Side Retimer Mode
• Full Datapath Loopback Capability (Serial/Parallel Side)
• Support PRBS 27-1 and 223-1 Generate/Verify. Support Standard Defined CJPAT, CRPAT, High Frequency, Low Frequency, and Mixed Frequency Testing
XGMII: HSTL Class 1 I/O with On-chip 50-Ω Termination on Inputs/Outputs (1.5-V Power Supply)
XGMII: Support Receive (Output) Aligned/Centered Timing Modes, and Transmit (Input) Source Centered Mode
• Supports Jumbo Packet (9600 byte maximum) Operation
• Align Character Skew Support of 30 bit Times at Chip Pins
DUAL MDIO: IEEE 802.3ae Clause 45 Compliant Management Data Input / Output Interface (1.2-V and 2.5-V I/O)
• 1.2-V Core, 1.5-V HSTL I/O Supply, and 2.5-V LVCMOS and Bias Supply
• JTAG: IEEE 1149.1 Test Interface
• ±200 ppm Clock TOlerance in XAUI Transmit and Receive Datapaths
• Diagnostic LED Output Interface
• 130-nm CMOS Technology
• Package: PBGA 484, 23×23mm, 484 ball, 1mm Pitch
• 2.42 W Typical Power Dissipation (DUAL XAUI Mode, Input HSTL Termination Disabled)
• Commercial Ambient Operating Temp (0°C TO 70°C)
   (1) XGMII Extender Sublayer

APPLICATIONS
• 10 Gigabit Ethernet Servers and Routers


Part Name(s) : TLK3118 TLK3118GDV TI
Texas Instruments
Description : Redundant XAUI TRANSCEIVER View

DESCRIPTION
The TLK3118 is a flexible, redundant XAUI serial TRANSCEIVER that is compliant TO 10-GBPS Ethernet XAUI specification. The TLK3118 provides high-speed bi-directional point-TO-point data transmissions with up TO 12.5 GBPS of raw data transmission capacity. The primary application of this device for use in backplanes and front panel connections requiring redundant 10GBPS connections over controlled impedance media of approximately 50 Ω. The transmission media can be printed circuit board (PCB) traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling inTO the lines.
The TLK3118 performs the parallel-TO-serial, serial-TO-parallel conversion, and clock extraction functions for a physical layer interface. The TLK3118 provides two complete XGXS/PCS functions defined in Clause 47/48 of the IEEE P802.3ae 10GBPS Ethernet standard. The serial transmitter is implemented using differential Current Mode Logic (CML) with integrated termination resisTOrs.

FEATURES
• Redundant QUAD 3.2-GBPS TRANSCEIVER Configurable as 10-GBPS Attachment Unit Interface (XAUI) TRANSCEIVER
• IEEE P802.3ae-2002 10 GBPS Ethernet XGXS (XGMII Extender Sublayer) Compliant
• Redundancy: Fast Switching from Primary TO Secondary XAUI channel with Provisionable Error Character or Local Code Fault Insertion at Switch Time
XAUI: Transmit Pre-Emphasis and Receive Adaptive Equalization TO Allow Extended Backplane Reach
• Selectable Full Duplex XAUI Retimer Mode
• Support PRBS 2 7–1 and 223– 1 Generate/verify. Support Standard Defined CJPAT, CRPAT, High Freq, Low Freq, and Mixed Freq testing
XGMII: HSTL Class 1 I/O with On-Chip 50-Ω Termination on Inputs/Outputs
XGMII: Source Centered Timing
• Supports Jumbo Packet (9600 byte maximum) Operation
• Align Character Skew Support of 40 bit times at Chip Pins
• MDIO: IEEE 802.3ae Clause 45 Compliant Management Data Input/Output Interface
• 1.2-V Core Voltage Supply, 1.5-V HSTL I/O Supply, and 2.5-V LVCMOS and Bias Supply
• JTAG: IEEE 1149.1 Test Interface
• Fabricated in Advanced 130-nm CMOS Technology
• Package: Small Footprint 21x21mm, 400-Ball, Fine Pitch (1mm) PBGA

 

Part Name(s) : VSC8476 Vitesse
Vitesse Semiconductor
Description : XAUI TO XFI 10GE & 10GFC TRANSCEIVER View

GENERAL DESCRIPTION:
The VSC8476 is a 10Gb Ethernet and 10Gb Fibre Channel Serial TRANSCEIVER that has a 10-Gigabit Attachment Unit Interface (XAUI) I/O, 8B/10B Encoder/Decoders, 64B/66B encoder/decoder, gearboxing function, 16:1 mux/demux and high speed I/O.

FEATURES:
10GbE and Fibre Channel Serial LAN TRANSCEIVER
Fully Compliant per IEEE802.3ae and T11 10GFC
XFI compliant 10.5 GBPS High-speed Front-end
Enhanced IO for Long Reach Copper Interconnect
4 x 3.125 & 3.182 GBPS XAUI I/O
XAUI I/O Programmability: Lane Swap, Bit Order Swap, Invert, Deskew, Amplitude, Emphasis and Equalization
Multiple Loop back Modes and Built in Self Test capabilities
JTAG Access Port
1.8V & 1.2V & 1.5V Supplies
TTL-compatible (1.5V or 1.8V or 3.3V Supply)
1W (Typical) Power

APPLICATIONS:
10 GBPS Ethernet Switches
10 GBPS Ethernet Routers
10 GBPS Ethernet Network Interface Cards
10 GBPS Fibre Channel Host Bus Adapters
10 GBPS Fibre Channel Switches

Part Name(s) : BCM84728 Broadcom
Broadcom Corporation
Description : DUAL-Channel 10-GbE SFI-TO-XAUI LAN/WAN PHY with 1588 View

DUAL-channel 10-Gigabit Ethernet (GbE) SFI-TO-XAUI™ LAN/WAN PHY that incorporates an electronic dispersion compensation (EDC) equalizer supporting SFP+ line card applications.

The BCM84728 is a lower-power version of the BCM8728 DUAL SFI-TO-XAUI PHY and also supports 1588 and WAN interface Sublayer (WIS) mode. The BCM84728 is a multirate physical layer device targeted for SMF, multimode fiber (MMF) or copper twin-ax applications interfacing TO both limiting-based and linear-based SFP+ and SFP modules. The BCM84728 is fully compliant with the 10GbE IEEE 802.3aq standard and also supports 1000BASE-X and SGMII modes.

Features

1. DUAL-channel SFI-TO-XAUI TRANSCEIVER
2. Supports SFP+ SR, LR and LRM optical interfaces
3. SFF-8431 CX1 compliant
4. LRM mode supports 300m of MMF, exceeding the IEEE 802.3aq standard

Part Name(s) : VSC9292 VSC9295 Vitesse
Vitesse Semiconductor
Description : 340 GBPS (136 x 136) and 170 GBPS (68 x68) TSI Switches with DUAL Rate (2.5G/622M) I/O View

GENERAL DESCRIPTION:
The VSC9295 is a 136 x 136 TSI switch IC supporting TFI-5 (STS-48-like frame) data on every input and output. All data inputs and outputs are differential serial signals running at 2.488 GBPS or 622 Mbps for TDM switching, or 2.488 GBPS, 2.125 GBPS, and 622 Mbps for transparent switching.

FEATURES:
Industry Highest Capacity SINGLE Chip TSI - 340 GBPS
25% Less Power Consumption Over Comparable Solutions
Scalable TO 1.36 Tbps
DUAL Rate 2.5 G / 622 M Standards Based I/O

APPLICATIONS:
Core/Metro Networks
Core/Metro Transport
DWDM Switches
Central Switch in 170 GBPS TO 340 GBPS STS-1 Grooming Fabric
Switch Element for 680 GBPS TO 1.36 Tbps STS-1 Grooming Fabric
Bit-slicing Engine for 680 GBPS TO 1.36 Tbps STS-1 Grooming Fabric
Ingress/Egress Device for Multi-terabit STS-1 Grooming Clos Fabric

Part Name(s) : MAX3981 MAX3981UGH MaximIC
Maxim Integrated
Description : 3.125GBPS XAUI QUAD Cable Equalizer View

General Description
The MAX3981 QUAD equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a data rate of 3.125GBPS in one package. It is tailor-made for 10Gigabit Ethernet applications that require attenuation of noise and jitter that occur in communicating with chassis-TO-chassis inter connect. In support of IEEE-802.3ae for the XAUI interface, the MAX3981 adaptively allows XAUI lanes TO reach 10m (33ft) with inexpensive twin-axial cable for extended backplane applications.

Features
♦Four Differential Digital Data “Lanes” at 3.125GBPS
♦Span 10m (33ft) of Twin-Axial Cable
♦Receiver Equalization Reduces Intersymbol Interference (ISI)
♦Low Power, 175mW per Channel
♦Standby Mode—Power-Down State
SINGLE 3.3V Supply
♦Signal Detect

Applications
IEEE–802.3ae XAUI Interface (3.125GBPS)
InfiniBand (2.5GBPS)

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]