DESCRIPTION The SG7900A/SG7900 series of negative regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current. with a variety of output voltages and four package options this regulator series is an optimum complement to the SG7800A/SG7800, SG140 line of three terminal regulators.
FEATURES • Output voltage set internally to ±1.5% on SG7900A • Output current to 1.5A • Excellent line and load regulation • Foldback current limiting • Thermal overload protection • Voltages available: -5V, -12V, -15V • Contact factory for other voltage options • Available in surface mount package
The SG7900A/SG7900 series of negative regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current. with a variety of output voltages and four package options this regulator series is an optimum complement to the SG7800A/SG7800, SG140 line of three terminal regulators.
• Output voltage set internally to ±± ±1.5% on SG7900A
• Output current to 1.5A
• Excellent line and load regulation
• Foldback current limiting
• Thermal overload protection
• Voltages available: -5V, -12V, -15V
• Contact factory for other voltage options
• Available in surface mount package
Protect Connectors From Damage Machined aluminum covers have rubber gaskets for a watertight ft.
Stainless Steel Fittings and Rings Choose small diameter eye fittings for panel attachment. Larger rings ft under the jam nut or over cable jackets. Split rings can be installed on fully Assembled cables.
Polyurethane-Coated SST Wire Rope oﬀers high strength, excellent abrasion resistance and good ﬂexibility. Or, choose Teflon® jacket for high temperature exposure.
Braided Nylon Rope provides excellent ﬂexibility and good abrasion resistance, and can be ordered with slip knot fttings for easy installation on any size cable.
Established Reliability Tantalum Capacitors to Military Specification MIL-PRF-39006: In accordance with the military specification MIL-PRF-39006 all capacitors are marked with the military part number (M39006/xx-xxxx) rather than the older style designation (CLR79, CLR81) and should be ordered as such. For information on the performance characteristics of these capacitors, please refer to the latest issue of the Military Specification. MIL-PRF-39006 establishes 1000 h failure rate levels of 1 %, 0.1 %, and 0.01 %. When ordering these parts, care must be exercised that the correct part number expressing the appropriate failure level be specified. Each order for military style capacitors requiring government inspection must state whether inspection is to be at the destination or at the Vishay plant. Orders requiring source inspection cannot be shipped until this has been accomplished.
FEATURES • Hermetically sealed • Metal cased • Axial lead • Tubular
Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors ®
DESIGN CHARACTERISTICS • Medium to heavy weight cylindrical • Durable, field-proven design • Environmental resistant • Resilient inserts • Operating voltage to 3000 VAC (RMS) at sea level • Threaded couplings • Single key/keyway shell polarization • Cost effective
CUSTOMER OPTIONS • Five shell styles • Nineteen shell sizes • 305 contact arrangements from 1 to 104 circuits • Solder or crimp contacts, sizes 16-0 accepting 22-0 AWG. • Coaxial and thermocouple contact options • Five class designations • Alternate insert positioning • Hermetic configurations available • Zinc alloy plating (cadmium-free) available
MS connectors meet the latest performance requirements of MIL-DTL-5015. These connectors represent well-proven electrical capability at an acceptable cost for most equipment where durability is important. MIL-DTL-5015 features threaded couplings and single key/keyway polarization, representing maximum simplicity in design. Applications include military ground support equipment, ordnance and shipboard installations.
GENERAL DESCRIPTION The Aeroflex-Plainview ACT4404N series are a new generation monolithic transceiver which provide full compliance with Macair and MIL-STD-1553 data bus requirements. The model ACT4404N series performs the front-end analog function of inputting and outputting data through a transformer to a MIL-STD-1553 or Macair data bus. The ACT4404N and ACT4440N can be considered a "Universal" Transceiver in that it is compatible with MIL-STD-1553A/B, Macair (A-3818, A-4905, A-5232 and A-5690).
FEATURES ❑ ACT4404N & ACT4440N transceivers meets MIL-STD-1553A & B, Macair A3818, A4905, A5232 and A5690 specs ❑ ACT4407N & ACT4467N transceivers meets MIL-STD-1553A & B specs only ❑ Bipolar supply ±15V to ±12V, logic supply +5V ❑ Monolithic construction ❑ ACT4404N is a direct replacement for the CT3232M and the ACT4407N is direct replacement for the CT3231 ❑ Voltage source output for higher bus drive power ❑ Variable receiver threshold capability ❑ Designed for commercial, industrial and aerospace applications ❑ MIL-PRF-38534 compliant devices available ❑ Aeroflex-Plainview is a Class H & K MIL-PRF-38534 manufacturer
The Solid State Power Controller (SSPC) Module is a microcontroller-based Solid State Relay rated upto 25A designed to be used in Army, Air force and Navy in 28V DC applications. This module has integrated current sensing with no derating over the full operating temperature range. The module is the electronic equivalent to an electromechanical circuit breaker with isolated control and status.
• Epoxy Shell Construction
• Solid State Reliability; Low Weight (20 gms) - High Power Density
• Same Pin Out as Industry Standard SSPCs in a Smaller Outline
• Extremely Low Power, No Derating Over the Full Temperature Range
Electrical Features (SPDXXD28 Series):
• 28VDC Input with Very Low Voltage Drop; 60mV, typ. @15A
• True I2t Protection from 32A to 250A with Nuisance Trip Suppression
• Instant Trip Protection (50 µsec typ) for Loads Above 250A
• Unlimited Interrupt Capability; Repetitive Fault Handling Capability
• Thermal Memory
• Internally Generated Isolated Supply to Drive the Switch
• Low Bias Supply Current: 20 mA typ @ 5V DC
• High Control Circuit Isolation: 750V DC Control to Power Circuit
• Soft Turn-On to Reduce EMC Issues
• EMI Tolerant
• Module Reset with a Low Level Signal; Reset Circuit is Trip-Free
• TTL/CMOS Compatible, Optically Isolated, Input and Outputs
• Schmitt-Trigger Control Input for Noise Immunity