datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : Intelligent Triac Controller

Description
The MLX90805 is a power control IC ideally suited for control of any resistive or inductive load regulated by a Triac.
The chip was designed primarily for starting and speed control of AC motors, but will work equally well with any Inductive or resistive load such as Incandescent lights.
The chip’s primary purpose is to provide a “soft start” for a motor, preventing current inrush. The Triac is controlled by a linear “ramp” from minimum to maximum power. Start rate can be varied from 0.5 sec. to 3 sec, by changing the option bits.
The secondary function of the 90805 is proper ignition of the Triac for inductive and resistive loads, while keeping the Triac’s current consumption to a minimum.
Added features include a frequency locked loop for stable ignition point.

Features and Benefits
  “Soft Start” Eliminates Current Surges
  Integrated Design Eliminates External Components
  Drives Virtually Any Resistive or Inductive Load
  Built–in Thermal Protection
  Digital Design For Stable Triac Control
  Immune to Lifetime and Thermal Drift
  Low Power Consumption
  50Hz/60Hz Operation

Applications
  AC Light Dimmer
  Soft-Start AC Motor Controller
  Variable-Speed AC Motor Controller

Melexis
Melexis Microelectronic Systems
Description : Intelligent Triac Controller

Description
The MLX90805 is a power control IC ideallysuited for control of anyresistive or inductive load
regulated bya Triac. The chip was designed primarilyfor startingand speed control of AC motors, but will work equallywell with anyInductive or resistive load such as Incandescent lights.
The chip’s primarypurpose is to provide a “soft start” for a motor, preventingcurrent inrush. The Triac is controlled bya linear “ramp” from minimum to maximum power. Start rate can be varied from 0.5 sec. to 3 sec, bychangingthe option bits.
The secondaryfunction of the 90805 is proper ignition of the Triac for inductive and resistive loads,
while keepingthe Triac’s current consumption to a minimum.
Added features include a frequencylocked loop for stable ignition point.

Features and Benefits
“Soft Start” Eliminates Current Surges
Integrated Design Eliminates External Components
Drives VirtuallyAnyResistive or Inductive Load
Built–in Thermal Protection
Digital Design For Stable Triac Control
Immune to Lifetime and Thermal Drift
Low Power Consumption
50Hz/60Hz Operation

Applications
AC Light Dimmer
Soft-Start AC Motor Controller
Variable-Speed AC Motor Controller

Part Name(s) : BTA41-600B BTA41-600BQ
ETC
Unspecified
Description : 4Q Triac

[WeEn Semiconductors]

General description
Planar passivated four quadrant Triac in a IITO3P package intended for use in circuits where high static and dynamic dV/dt and high dI/dt can occur. This Triac will commutate the full RMS current at the maximum rated junction temperature (Tj(max) = 150 °C). It is used in applications where "high junction operating temperature capability" is required.

Features and benefits
• High current Triac
• Low thermal resistance
• High junction operating temperature capability (Tj(max) = 150 °C)
• High voltage capability
• Planar passivated for voltage ruggedness and reliability
• Insulated tab rated at 2500 V rms

Applications
• High current / high surge applications
• High power / industrial controls -- e.g. heating, motors, lighting

Part Name(s) : T610T-8FP
ST-Microelectronics
STMicroelectronics
Description : 6 A logic level Triac

Description
Available in through-hole fullpack package, the T610T-8FP Triac can be used for the on/off or phase angle control function in general purpose AC switching. This device can be directly driven by a microcontroller thanks to its 10 mA gate current requirement. Provide UL certified insulation rated at 2000 VRMS.

Features
• Medium current Triac
• Three triggering quadrants Triac
• ECOPACK®2 compliant component
• Complies with UL standards (File ref: E81734)
• 6 A high performance Triac:
   – High Tj family
   – High dI/dt family
   – High dV/dt family
• Insulated package TO-220FPAB:
   – Insulated voltage: 2000 VRMS

Applications
• General purpose AC line load switching
• Motor control circuits
• Small home appliances
• Lighting
• Inrush current limiting circuits
• Overvoltage crowbar protection

Part Name(s) : BT138B-600E
NXP
NXP Semiconductors.
Description : 4Q Triac

General description
Planar passivated sensitive gate four quadrant Triac in a SOT404 (D2PAK) surfacemountable plastic package intended for use in general purpose bidirectional switching and phase control applications. This sensitive gate "series E" Triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.

Features and benefits
• Direct triggering from low power drivers and logic ICs
• High blocking voltage capability
• Planar passivated for voltage ruggedness and reliability
• Sensitive gate
• Surface-mountable package
• Triggering in all four quadrants

Applications
• General purpose motor control
• General purpose switching

Part Name(s) : BT134W-600E BT134W-6E
NXP
NXP Semiconductors.
Description : 4Q Triac

General description
Planar passivated sensitive gate four quadrant Triac in a SOT223 surface-mountable plastic package. This sensitive gate "series E" Triac is intended for interfacing with low power drivers including microcontrollers.

Features and benefits
• Direct interfacing to logic level ICs
• Direct interfacing to low power gate drivers and microcontrollers
• High blocking voltage capability
• Planar passivated for voltage ruggedness and reliability
• Sensitive gate
• Surface-mountable package
• Triggering in all four quadrants

Applications
• General purpose low power motor control
• General purpose switching and phase control

NXP
NXP Semiconductors.
Description : 4Q Triac

General description
Planar passivated very sensitive gate four quadrant Triac in a SOT223 surface-mounable plastic package. This very sensitive gate "series D" Triac is intended for interfacing with low power drivers including microcontrollers.

Features and benefits
• Direct interfacing to logic level ICs
• Direct interfacing to low power gate drivers and microcontrollers
• High blocking voltage capability
• Planar passivated for voltage ruggedness and reliability
• Surface-mountable package
• Triggering in all four quadrants
• Very sensitive gate

Applications
• General purpose low power motor control
• General purpose switching and phase control

Description : 4Q Triac

General description
Planar passivated very sensitive gate four quadrant Triac in a SOT78 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" Triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.

Features and benefits
• Direct triggering from low power drivers and logic ICs
• High blocking voltage capability
• Low holding current for low current loads and lowest EMI at commutation
• Planar passivated for voltage ruggedness and reliability
• Triggering in all four quadrants
• Very sensitive gate

Applications
• General purpose motor control
• General purpose switching

Description : 4Q Triac

description
Planar passivated sensitive gate four quadrant Triac in a SOT78 plastic package intended
for use in general purpose bidirectional switching and phase control applications. This
sensitive gate "series E" Triac is intended to be interfaced directly to microcontrollers,
logic integrated circuits and other low power gate trigger circuits.


 Features and benefits
• Direct triggering from low power drivers and logic ICs
• High blocking voltage capability
• Low holding current for low current loads and lowest EMI at commutation
• Planar passivated for voltage ruggedness and reliability
• Sensitive gate
• Triggering in all four quadrants

NXP
NXP Semiconductors.
Description : 4Q Triac

description
Planar passivated sensitive gate four quadrant Triac in a SOT78 plastic package intended
for use in general purpose bidirectional switching and phase control applications. This
sensitive gate "series E" Triac is intended to be interfaced directly to microcontrollers,
logic integrated circuits and other low power gate trigger circuits.
Features and benefits
• Direct triggering from low power drivers and logic ICs
• High blocking voltage capability
• Low holding current for low current loads and lowest EMI at commutation
• Planar passivated for voltage ruggedness and reliability
• Sensitive gate
• Triggering in all four quadrants

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]