datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : VSC7281 Vitesse
Vitesse Semiconductor
Description : Dual XAUI – SINGLE XGMII Quad 0.95 GBPS to 3.25 GBPS TRANSCEIVER

GENERAL DESCRIPTION
The VSC7281 is a Dual XAUI – SINGLE XGMII TRANSCEIVER tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
► Dual XAUI Serial Bus
SINGLE XGMII Parallel Bus
► 0.95 GBPS to 3.25 GBPS Quad SerDes/TRANSCEIVER
► XAUI Compliant Retimer and Repeater MODEs
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-toChannel Alignment
► Received Data Aligned to Local REFCLK or to Recovered Clock
► TX and RX Rate Matching for FC, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-to-Box Serial Communications
    - Copper, Coax, and Fiber
   

View
Part Name(s) : TLK2501 TLK2501IRCP TLK2501IRCPG4 TLK2501IRCPR TLK2501IRCPRG4 TI
Texas Instruments
Description : 1.5 TO 2.5 GBPS TRANSCEIVER

description
The TLK2501 is a member of the TRANSCEIVER family of multigigabit TRANSCEIVERs used in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2501 supports an effective serial interface speed of 1.5 GBPS to 2.5 GBPS, providing up to 2 GBPS of data bandwidth. The TLK2501 is pin-for-pin compatible with the TLK2500. The TLK2501 is both pin-for-pin compatible with and functionally identical to the TLK1501, a 0.6 to 1.5 GBPS TRANSCEIVER, and the TLK3101, a 2.5 to 3.125 GBPS TRANSCEIVER, providing a wide range of performance solutions with no required board layout changes.

● Hot-Plug Protection
● 1.5 to 2.5 Gigabits Per Second (GBPS) Serializer/Deserializer
● High-Performance 64-Pin VQFP Thermally Enhanced Package (PowerPAD)
● 2.5-V Power Supply for Low Power Operation
● Programmable Voltage Output Swing on Serial Output
● Interfaces to Backplane, Copper Cables, or Optical Converters
● Rated for Industrial Temperature Range
● On-Chip 8-Bit/10-Bit (8B/10B) Encoding/Decoding, Comma Alignment, and Link Synchronization
● On-Chip PLL Provides Clock Synthesis From Low-Speed Reference
● Receiver Differential Input Thresholds 200 mV Minimum
● Typical Power: 360 mW
● Loss of Signal (LOS) Detection
● Ideal for High-Speed Backplane Interconnect and Point-to-Point Data Link

View
Part Name(s) : SPS-8340BG SPS-8340G Optoway
Optoway Technology
Description : 3.3V / 1550 nm / 4.25 GBPS LC SFP SINGLE-MODE TRANSCEIVER

DESCRIPTION
The SPS-8340G series SINGLE MODE TRANSCEIVER is small form factor pluggable module for bi-directional serial optical dat a communicat ions such as 4x/2x/ 1x Fibre Channel and 1000BASE Ethernet . It is with t he SFP 20- pin connector to allow hot plug capability . This module is designed for SINGLE MODE fiber and operates at a nominal wave length of 1550 nm. The transmitter secti on  uses  a 1550 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety  Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical  header and a limiting post-amplifier IC.

FEATURES
Up  to  4.25 GBPS Bi-directional Dat a Links
Hot-Pluggable SFP Footprint LC Optical TRANSCEIVER
Small Form-Factor Pl uggable(SFP) MSA compatible
Compliance with Fibre Channel FC-PI 400/ 200/ 100-SM-LC-L
1550 nm DFB LD Transmitter
18 dB Power Budget at Least
AC/AC Coupling according  to MSA
Up to  40 km Transmission
SINGLE +3.3 V Power Supply
RoHS Compliant
0 to 70°C Operating : SPS-8340G
-10  to 85°C Operating : SPS-8340BG
Class  1 Laser International Safety  Standard IEC-60825 Compliant

 

View
Part Name(s) : TLK2500IRCP TI
Texas Instruments
Description : 1.6 GBPS to 2.5 GBPS TRANSCEIVER

description
The TLK2500 multigigabit TRANSCEIVER can be used for ultra-high-speed bidirectional point-to-point data transmissions. The TLK2500 supports an effective serial interface speed of 1.6 GBPS to 2.5 GBPS.
The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 Ω. The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

● 1.6 to 2.5 Gigabits Per Second (GBPS) Serializer/Deserializer
● Hot Plug Protection
● High-Performance 64-Pin VQFP Thermally Enhanced Package (PowerPAD)
● 2.5-V Power Supply for Low-Power Operation
● Programmable Voltage Output Swing on Serial Output
● Interfaces to Back Plane, Copper Cables or Optical Converters
● On-Chip 8B/10B Encoding/Decoding, Comma and Synch
● On-Chip PLL Provides Clock Synthesis From Low-Speed Reference
● Receiver Differential Input Thresholds 200 mV Min
● Typical Power 350 mW
● 16-Bit Parallel LV TTL (3.3 V) Compatible Data Interface
● Transmitter Pre-Emphasis/De-Emphasis for Improved Signal Integraity
● Rated for Industrial Temperature Range
● Ideal for High-Speed Back Plane Interconnect and Point-to-Point Data Links

View
Part Name(s) : VSC9292 VSC9295 Vitesse
Vitesse Semiconductor
Description : 340 GBPS (136 x 136) and 170 GBPS (68 x68) TSI Switches with Dual Rate (2.5G/622M) I/O

GENERAL DESCRIPTION:
The VSC9295 is a 136 x 136 TSI switch IC supporting TFI-5 (STS-48-like frame) data on every input and output. All data inputs and outputs are differential serial signals running at 2.488 GBPS or 622 Mbps for TDM switching, or 2.488 GBPS, 2.125 GBPS, and 622 Mbps for transparent switching.

FEATURES:
Industry Highest Capacity SINGLE Chip TSI - 340 GBPS
25% Less Power Consumption Over Comparable Solutions
Scalable to 1.36 Tbps
Dual Rate 2.5 G / 622 M Standards Based I/O

APPLICATIONS:
Core/Metro Networks
Core/Metro Transport
DWDM Switches
Central Switch in 170 GBPS to 340 GBPS STS-1 Grooming Fabric
Switch Element for 680 GBPS to 1.36 Tbps STS-1 Grooming Fabric
Bit-slicing Engine for 680 GBPS to 1.36 Tbps STS-1 Grooming Fabric
Ingress/Egress Device for Multi-terabit STS-1 Grooming Clos Fabric

View
Part Name(s) : SPS-93120F-CXX0G SPS-93120BF-CXX0G SPS-93120F-CXX0G SPS-93120BF-CXX0G Optoway
Optoway Technology
Description : 3.3V / CWDM / 2.125 GBPS SFP LC SINGLE-MODE TRANSCEIVER

DESCRIPTION
The SPS-93120F-CXX0G series SINGLE MODE TRANSCEIVERs is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fibre Channel 1Xx/2X SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for SINGLE MODE fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wavelengths available from 1470 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 30 dB is offered The transmitter section uses a multiple quantum well CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

FEATURES
● Hot-Pluggable SFP Footprint LC Optical TRANSCEIVER
● Small Form-Factor Pluggable (SFP) MSA compatible
● 8 Wavelength (λ): 1470 nm to 1610 nm CWDM DFB LD Transmitter
● Compliant with IEEE 802.3z 1000BASE
● Compliant with Fibre Channel 1X/2X SM-LC-L FC-PI
● APD High Sensitivity Receiver
● 30 dB Power Budget at Least
● AC/AC Coupling according to MSA
SINGLE +3.3 V Power Supply
● RoHS Compliant
● 0 to 70°C Operation: SPS-93120F-CXX0G
● -5 to 85°C Operation: SPS-93120BF-CXX0G
● Class 1 Laser International Safety Standard IEC 60825 Compliant

APPLICATIONS
● ATM Switches and Routers
● SONET / SDH Switch Infrastructure
● XDSL Applications
● Metro Edge Switching

View
Part Name(s) : VSC8479 Vitesse
Vitesse Semiconductor
Description : 9.95 GBPS to 11.3 GBPS 16-bit TRANSCEIVER


GENERAL DESCRIPTION:
The VSC8479 is a 1:16, 16:1 TRANSCEIVER with integrated Clock and Data Recovery unit (CDR) and Clock Multiplier Unit (CMU) that provides the most comprehensive solution available in the industry. Continuous frequency of operation spans from 9.953 GBPS to 11.3 GBPS over full temperature range. Targeted for XFP Host ASIC SERDES, 300 pin module and DWDM line card applications, the VSC8479 provides industry leading optimization of power, performance,
programmability, price and feature integration. The 1.15 W total power dissipation enables 300 pin MSA module vendors to provide performance and functionality advantages while dropping the overall power dissipation of their existing modules. The VSC8479 is a perfect choice for XFP motherboards with proven inter-operability with all major XFP module vendors.

FEATURES:
16:1 Mux/Demux TRANSCEIVER With Integrated Clock Multiplier Unit, and Clock and Data Recov-ery Unit with Limiting Amplifier
0.13µm CMOS Process Technology
XFI Output Compliance MODE for XFP Modules
Programmable Input Signal Bandwidth Equalization (EQ)
  - Enhanced Optical Performance
  - Enhanced XFI Stressed Eye Performance
Built-in Self-test Generation and Error Detection:
  - Industry Standard PRBS Generation and Detection
  - User Defined Patterns
Full Support for 300-Pin MSA Transponder Modules:
  - Multiple Reference Clock Source Inputs and Selectable Frequencies
  - Facility and Equipment Loopback MODEs
  - Support for Line Timing MODE with Clock Clean-up
  - Loss of Lock (LOL) and FIFO Alarm Outputs
  - Adjustable Loss of Signal (LOS) Alarm
Two-wire or SPI Micro-controller Serial Interface Port (selectable)
  - Programmable Registers for Access to All Control/Status Signals TxRef Clock, RxRef Clock and ExRef Clock Sources
  - Flexible Reference Clock Routing
  - Reference Clock “Clean-up” Phase Detector
Selectable Duobinary Modulation Pre-Coder
Programmable High-speed Input Voltage Offset Adjust
High-speed Data Inversion and Low-Speed Bit Order Swap
High-speed CML Clock Output with Power Down MODE

APPLICATIONS:
XFP Module XFI to Host SERDES Applications
300 Pin MSA Transponder Modules
10GE and Fibre Channel to SFI-4 SERDES Applications
SONET/SDH and DWDM Systems

View
Part Name(s) : VSC8486 Vitesse
Vitesse Semiconductor
Description : 10 GBPS XAUI or XGMII to XFI LAN/WAN TRANSCEIVER


GENERAL DESCRIPTION:
The VSC8486 is a LAN/WAN XAUI or XGMII TRANSCEIVER that converts 3 GBPS XAUI data to a 10 GBPS serial stream. At just 750 mW, the VSC8486 is ideal for applications requiring low power. The
device is also equipped with an additional full-rate data port that can be utilized for bypass monitoring or channel monitoring applications. The device meets all specifications for 10 Gigabit Ethernet (GbE) Layer-1 processing, as defined in IEEE 802.3ae.

View
Part Name(s) : SPS-73200WG Optoway
Optoway Technology
Description : 3.3V / 1550 nm / 1.25 GBPS Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

DESCRIPTION
The SPS-73200WG series SINGLE MODE TRANSCEIVERs is small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability.

FEATURES
● Hot-Pluggable SFP Footprint LC Optical TRANSCEIVER
● Small Form-Factor Pluggable (SFP) MSA compatible
● Compliant with IEEE 802.3z Gigabit Ethernet
● Compliant with Fiber Channel 1X SM-LC-L FC-PI
● SFF-8472 Digital Diagnostic Function
● 1550 nm DFB LD Transmitter
● APD High Sensitivity Receiver
● 41 dB Power Budget at Least
● Distance up to 200 km
● AC/AC Coupling according to MSA
SINGLE +3.3 V Power Supply
● RoHS Compliant
● 0 to 70oC Operation
● Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS
● Gigabit Ethernet Switches and Routers
● Fiber Channel Switch Infrastructure
● XDSL Applications
● Metro Edge Switching

View
Part Name(s) : VSC7280 Vitesse
Vitesse Semiconductor
Description : Dual XAUI – Dual XGMII Octal 0.95 GBPS to 3.25 GBPS TRANSCEIVER

GENERAL DESCRIPTION :
The VSC7280 is a Dual XAUI – Dual XGMII TRANSCEIVERs tailored for 10 Gigabit Ethernet (10GbE) and 10 Gigabit Fibre Channel (10GFC) applications. The feature set and flexibility of these devices make them perfectly suited for Backplane and other Serial Interconnect applications such as Serial Rapid I/O, PCI Express and XAUI.
   
FEATURES
► IEEE802.3ae 10 Gigabit Ethernet Compliant
► ANSI 10Gb Fibre Channel Compliant
► Dual XAUI Serial Bus
► Dual XGMII Parallel Bus
► 0.95 GBPS to 3.25 GBPS Octal SerDes/TRANSCEIVER
► XAUI Compliant Retimer and Repeater MODEs
► Simultaneous Operation at Multiple Frequencies
► Programmable Pre-Emphasis and Signal Equalization
► 8B/10B Encoder/Decoder with Optional Bypass
► Programmable Rate Matching Characters
► Elastic Buffer for Intra/Inter-Chip Deskewing and Channel-toChannel Alignment
► Received Data Aligned to Local REFCLK or to Recovered Clock
► TX and RX Rate Matching for XAUI, 1GbE, and InfiniBand™
► Output Reduced Swing Level for Optics
► Serial and Parallel Loopback
► Fast Locking CRU
► Flexible CMU Operation
► IEEE802.3 MDIO Register Interface
► Multiple Built-In-Self Test Diagnostics and Counters
    - PRBS, CRPAT, CJPAT Pattern Generation
► JTAG Boundary Scan
► HSTL1.5 and HSTL1.8 Parallel I/O
   
APPLICATIONS
► 10 Gigabit Ethernet and Fibre Channel Links
    - XENPAK, X2, XPAK Module Connections
► High Speed Serial Backplanes
    - XAUI Channel
    - Independent Channel Control
► Box-to-Box Serial Communications
    - Copper, Coax, and Fiber
   

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]