datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  S630 Datasheet

S630

  

Datasheet PDF

Match, Like N/A
Start with N/A
End *TS630 *LS630 *CS630 *-S630 *PS630 *RS630 *8S630 *2S630 *FS630 *1S630
Included *S6300* *S6301* *S6302* *S6303* *S6304* *S6305* *S6306* *S6307* *S6308* *S630A* *S630B* *S630D* *S630H* *S630K* *S630M* *S630S*
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
TPS63031DSK High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63031DSK PDF
TI
Texas Instruments
TPS63010YFF HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63010YFF PDF
TI
Texas Instruments
TPS63011YFFR HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFT  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63011YFFR PDF
TI
Texas Instruments
TPS63030DSKR High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030DSKR PDF
TI
Texas Instruments
TPS63012YFFT HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  
TPS63012YFFT PDF
TI
Texas Instruments
TPS63031DSKTG4 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  
TPS63031DSKTG4 PDF
TI
Texas Instruments
TPS63011 HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63011 PDF
TI
Texas Instruments
TPS63030 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030 PDF
TI
Texas Instruments
TPS63012YFF HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFFR  
TPS63012YFF PDF
TI
Texas Instruments
TPS63030DSKTG4 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030DSKTG4 PDF
TI
Texas Instruments
TPS63031DSKR High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKT  TPS63031DSKTG4  
TPS63031DSKR PDF
Siemens
Siemens AG
Q67060-S6300-A2 Smart Two Channel Highside Power Switch

General Description
N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Fully protected by embedded protection functions.

Features
• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection (including load dump)
• Reverse battery protection1)
• Undervoltage and overvoltage shutdown with
   auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge (ESD) protection

Application
• µC compatible power switch with diagnostic
   feedback for 12 V DC grounded loads
• Most suitable for resistive and lamp loads


other parts : BTS610L1  
Q67060-S6300-A2 PDF

1

2345678910 Next

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  S7010  MB39A108_03  FT5753M  BSS110  2SK2019-01  2SK1279  2SK1277  2SK2050  2SK1507  2SK1507-01M  ESAD83-004  7MBR15SA120D-01  2MBI100NB-120  MMA8451Q  MMZ09312BT1  MPXV7002  MMA7260Q  33975_05  33975_08  ZVNL120A  2SD1351  65239-005LF_  XR21V1412  7MBR35SB120-01  SK3699-01MR  ESAD83-004K  D83-004  2SD1351  7MBR10VKA060-50  XR21V1412IL-0B-EB  NA12W-K  BSS110  ZVNL120A  MPC18730EP  M57184N-715B  M57184N-715B  ESAD83-004R  CA4800C  7MBP150RA060  RY5W-K  PDMB400B12C  MPXV5100GP  MPX5100  MMA7361LC  MC68HC11D3MFN1  MB91232L  MB91F267A  MB91230  MB90330A  MC68HC11E  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]