datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  S630 Datasheet

S630

  

Datasheet PDF

Match, Like N/A
Start with N/A
End *TS630 *LS630 *CS630
Included *CS630* *-S630* *PS630* *RS630* *8S630* *TS630* *2S630* *LS630* *FS630* *1S630*

View Details

Manufacturer Part no Description View
TI
Texas Instruments
TPS63011YFFT HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63011YFFT PDF
TI
Texas Instruments
TPS63030DSKTG4 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030DSKTG4 PDF
Infineon
Infineon Technologies
Q67060-S6300-A2 Smart Two Channel Highside Power Switch

General Description
N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Fully protected by embedded protection functions.

Features
• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection (including load dump)
• Reverse battery protection1)
• Undervoltage and overvoltage shutdown with
   auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge (ESD) protection

Application
• µC compatible power switch with diagnostic
   feedback for 12 V DC grounded loads
• Most suitable for resistive and lamp loads


other parts : BTS610L1  
Q67060-S6300-A2 PDF
TI
Texas Instruments
TPS63031DSKR High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKT  TPS63031DSKTG4  
TPS63031DSKR PDF
TI
Texas Instruments
TPS63010 HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63010 PDF
TI
Texas Instruments
TPS63030DSKRG4 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030DSKRG4 PDF
IXYS
IXYS CORPORATION
CS630-16IO1 Phase Control Thyristor

ITRMS = 1400 A
ITAVM = 630 A
VRRM = 1200 - 1600

Features
● Thyristor for line frequency
● International standard package
● Long-term stability of blocking voltages
● Gate and auxiliary cathode pin connection
● Amplifying gate

Typical Applications
● DC Motor control
● Power converter
● AC power controller

 


other parts : CS630  CS630-12IO1  CS630-14IO1  
CS630-16IO1 PDF
TI
Texas Instruments
TPS63011YFF HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  TPS63012YFFR  
TPS63011YFF PDF
TI
Texas Instruments
TPS63012YFFR HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs


other parts : TPS63010  TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT  TPS63012  TPS63012YFF  
TPS63012YFFR PDF
TI
Texas Instruments
TPS63031 High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63031 PDF
TI
Texas Instruments
TPS63030DSK High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 


other parts : TPS63030  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK  TPS63031DSKR  TPS63031DSKT  TPS63031DSKTG4  
TPS63030DSK PDF
IXYS
IXYS CORPORATION
CS630-12IO1 Phase Control Thyristor

ITRMS = 1400 A
ITAVM = 630 A
VRRM = 1200 - 1600

Features
● Thyristor for line frequency
● International standard package
● Long-term stability of blocking voltages
● Gate and auxiliary cathode pin connection
● Amplifying gate

Typical Applications
● DC Motor control
● Power converter
● AC power controller

 


other parts : CS630  CS630-14IO1  CS630-16IO1  
CS630-12IO1 PDF

1

234

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SB020  PCA-COM232-00A1E  NJU3553M  NCP7815TG  ER804F_09  ER804_02  BUZ271  IXXR110N65B4H1  SN74ACT08-EP  SIHB10N40D-GE3  TDA8133_94  TDA8133  SML-LXR85SRC-TR  CRCW0805150KFKEB  SML-LXR85SRC-TR_11  NXA66  MBR10100CT-E3/45  SB030  2023  FDPF8N60ZUT  YB1520  TC1188  SN74ACT08DBRE4  SN74ACT08DB  SB0203EJ  S6B0741  PHP5N40  PD488588FF  NXA66-12P3V3CY  MSM6240  MA4SW301  LT1173CS8-5  LB1760  IRF3709ZCS  IRF3709ZCSPBF  IRF3709ZPBF  IRF3709Z  GP02-40-LFR  GBPC5010M  BQ2114LB-XXX  BD4210EKN  AT45DB081D-SU  AT45DB081D  AT45DB081B-RC  AT45DB081A  AT45DB081  AN7289NFBQ  AN7280S  AN7289  ADM1810-15ART-RL7  TDA2030A  Part List  Manufacturers List 
  


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]