VOLTAGE 50 to 1000 Volts CURRENT 3.0 Amperes

FEATURES
• High current capability.
• Plastic package has Underwriters Laboratory
   Flammability Classification 94V-O utilizing
   Flame Retardant Epoxy Molding Compound.
• Low leakage.
• Exceeds environmental standards of MIL-S-19500/228
• Fast switching for high efficiency.
• In compliance with EU RoHS 2002/95/EC directives

Description
The PS301/PS302/PS303 are improved high precision, medium voltage analog switches designed to operate with single power supplies. The PS301 is a single-pole single-throw (SPST), normally open (NO) switch. The PS302 has the same pinout as the PS301 but is a normally closed (NC) switch. The PS303 has one normally open (NO) and one normally closed (NC) switch per package. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rail.
With a +5V power supply, the PS301/PS302/PS303 guarantee <60Ω ON-resistance. ON-resistance matching between channels is within 2Ω. ON-resistance flatness is less than 6Ω over the specified range. All three devices guarantee low leakage currents (<100pA @ 25oC, <10nA @ +85oC) and fast switching speeds (tON < 150ns). Break-before-make switching action protects against momentary crosstalk (PS303).
For single-supply operation below 5V, the PI5A317/318/319 are also recommended.

Features
• Low On-Resistance (33Ω typ) Minimizes Distortion and Error Voltages
• Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ
• Single-Supply Operation (+2.5V to +16V)
• Improved Second Sources for MAX4501/MAX4502
• On-Resistance Matching Between Channels, <2Ω
• On-Resistance Flatness, <6Ω max
• Low Off-Channel Leakage, <5nA @ +85oC
• TTL/CMOS Logic Compatible
• Fast Switching Speed, tON < 150ns
• Guaranteed Break-Before-Make action (PS303 only) eliminates momentary crosstalk
• Rail-to-Rail Analog Signal Dynamic Range
• Low Power Consumption, <5µW
• MSOP Package minimizes board area

Applications
• Audio, Video Switching and Routing
• Portable Instruments
• Data Acquisition Systems
• Sample-and-Holds
• Telecommunication Systems
• Battery-Powered Systems

Metal Insulator Semiconductor/Metal Oxide Semiconductor

For applications in RF, Microwave and GHz ranges, AVX offers MIS/MOS Capacitors. These are Single Layer Capacitors (SLCs) that use Silicon Nitride or Silicon Dioxide to produce small, high Q, temperature stable, high break down voltage, low leakage capacitors. To ease assembly, AVX offers a wide range of termination styles for epoxy or solder die attach and subsequent Gold or Aluminum wire thermoson ic and ultrasonic bonding. Custom applications and designs are welcome. Please contact your local representative.

BENEFITS
• MIS, SiON dielectric up to 100V applications
• MOS, SiO2 dielectric up to 50V applications
• Sizes as small as 10 mils (254µm) squared
• DC to GHz operation
• High Q, low leakage

Description
The TS3021/2 single and dual comparators feature high-speed response time with rail-to-rail
inputs. Specified from 2V to 5V supply voltage, these comparators can operate over a wide
temperature range: -40°C to +125°C.
The TS3021/2 comparators offer micropower consumption as low as a few tens of microamperes thus providing an excellent ratio of power consumption current versus response time.
The TS3021/2 include push-pull outputs and are available in small packages (SMD).

Features
■ Propagation delay: 33ns
■ Low current consumption: 64μA
■ Rail-to-rail inputs
■ Push-pull outputs
■ Supply operation from 1.8V to 5V
■ Wide temperature range: -40°C to +125°C
■ ESD tolerance: 2kV HBM / 200V MM
■ Latch-up immunity: 200mA
■ SMD packages

Applications
■ Telecom
■ Instrumentation
■ Signal conditioning
■ High-speed sampling systems
■ Portable communication systems

Description
The PS301/PS302/PS303 are improved high precision, medium voltage analog switches designed to operate with single power supplies. The PS301 is a single-pole single-throw (SPST), normally open (NO) switch. The PS302 has the same pinout as the PS301 but is a normally closed (NC) switch. The PS303 has one normally open (NO) and one normally closed (NC) switch per package. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rail.
With a +5V power supply, the PS301/PS302/PS303 guarantee <60Ω ON-resistance. ON-resistance matching between channels is within 2Ω. ON-resistance flatness is less than 6Ω over the specified range. All three devices guarantee low leakage currents (<100pA @ 25oC, <10nA @ +85oC) and fast switching speeds (tON < 150ns). Break-before-make switching action protects against momentary crosstalk (PS303).
For single-supply operation below 5V, the PI5A317/318/319 are also recommended.

Features
• Low On-Resistance (33Ω typ) Minimizes Distortion and Error Voltages
• Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ
• Single-Supply Operation (+2.5V to +16V)
• Improved Second Sources for MAX4501/MAX4502
• On-Resistance Matching Between Channels, <2Ω
• On-Resistance Flatness, <6Ω max
• Low Off-Channel Leakage, <5nA @ +85oC
• TTL/CMOS Logic Compatible
• Fast Switching Speed, tON < 150ns
• Guaranteed Break-Before-Make action (PS303 only) eliminates momentary crosstalk
• Rail-to-Rail Analog Signal Dynamic Range
• Low Power Consumption, <5µW
• MSOP Package minimizes board area

Applications
• Audio, Video Switching and Routing
• Portable Instruments
• Data Acquisition Systems
• Sample-and-Holds
• Telecommunication Systems
• Battery-Powered Systems

Metal Insulator Semiconductor/Metal Oxide Semiconductor

For applications in RF, Microwave and GHz ranges, AVX offers MIS/MOS Capacitors. These are Single Layer Capacitors (SLCs) that use Silicon Nitride or Silicon Dioxide to produce small, high Q, temperature stable, high break down voltage, low leakage capacitors. To ease assembly, AVX offers a wide range of termination styles for epoxy or solder die attach and subsequent Gold or Aluminum wire thermoson ic and ultrasonic bonding. Custom applications and designs are welcome. Please contact your local representative.

BENEFITS
• MIS, SiON dielectric up to 100V applications
• MOS, SiO2 dielectric up to 50V applications
• Sizes as small as 10 mils (254µm) squared
• DC to GHz operation
• High Q, low leakage

Mean Breakdown Voltage - 24 and 28 volts Peak Pulse Current - 60 Amperes

FEATURES
♦ Plastic package has Underwriters Laboratory
   Flammability Classification 94V-0
♦ High temperature stability due to unique oxide passivation
♦ Patented Passivated Anisotropic Rectifier
   (PAR) construction
♦ Integrally molded heatsink provides
   a very low thermal resistance
   for maximum heat dissipation
♦ Low leakage current at TJ=175°C
♦ Low forward voltage drop
♦ Ideally suited for alternator rectification and load dump
   protection
♦ High temperature soldering guaranteed:
   260°C for 10 seconds at terminals

Metal Insulator Semiconductor/Metal Oxide Semiconductor

For applications in RF, Microwave and GHz ranges, AVX offers MIS/MOS Capacitors. These are Single Layer Capacitors (SLCs) that use Silicon Nitride or Silicon Dioxide to produce small, high Q, temperature stable, high break down voltage, low leakage capacitors. To ease assembly, AVX offers a wide range of termination styles for epoxy or solder die attach and subsequent Gold or Aluminum wire thermoson ic and ultrasonic bonding. Custom applications and designs are welcome. Please contact your local representative.

BENEFITS
• MIS, SiON dielectric up to 100V applications
• MOS, SiO2 dielectric up to 50V applications
• Sizes as small as 10 mils (254µm) squared
• DC to GHz operation
• High Q, low leakage

Chip LED / LED Lamp

Metal Insulator Semiconductor/Metal Oxide Semiconductor

For applications in RF, Microwave and GHz ranges, AVX offers MIS/MOS Capacitors. These are Single Layer Capacitors (SLCs) that use Silicon Nitride or Silicon Dioxide to produce small, high Q, temperature stable, high break down voltage, low leakage capacitors. To ease assembly, AVX offers a wide range of termination styles for epoxy or solder die attach and subsequent Gold or Aluminum wire thermoson ic and ultrasonic bonding. Custom applications and designs are welcome. Please contact your local representative.

BENEFITS
• MIS, SiON dielectric up to 100V applications
• MOS, SiO2 dielectric up to 50V applications
• Sizes as small as 10 mils (254µm) squared
• DC to GHz operation
• High Q, low leakage

Description
The TS3021/2 single and dual comparators feature high-speed response time with rail-to-rail
inputs. Specified from 2V to 5V supply voltage, these comparators can operate over a wide
temperature range: -40°C to +125°C.
The TS3021/2 comparators offer micropower consumption as low as a few tens of microamperes thus providing an excellent ratio of power consumption current versus response time.
The TS3021/2 include push-pull outputs and are available in small packages (SMD).

Features
■ Propagation delay: 33ns
■ Low current consumption: 64μA
■ Rail-to-rail inputs
■ Push-pull outputs
■ Supply operation from 1.8V to 5V
■ Wide temperature range: -40°C to +125°C
■ ESD tolerance: 2kV HBM / 200V MM
■ Latch-up immunity: 200mA
■ SMD packages

Applications
■ Telecom
■ Instrumentation
■ Signal conditioning
■ High-speed sampling systems
■ Portable communication systems

Description
The PS301/PS302/PS303 are improved high precision, medium voltage analog switches designed to operate with single power supplies. The PS301 is a single-pole single-throw (SPST), normally open (NO) switch. The PS302 has the same pinout as the PS301 but is a normally closed (NC) switch. The PS303 has one normally open (NO) and one normally closed (NC) switch per package. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rail.
With a +5V power supply, the PS301/PS302/PS303 guarantee <60Ω ON-resistance. ON-resistance matching between channels is within 2Ω. ON-resistance flatness is less than 6Ω over the specified range. All three devices guarantee low leakage currents (<100pA @ 25oC, <10nA @ +85oC) and fast switching speeds (tON < 150ns). Break-before-make switching action protects against momentary crosstalk (PS303).
For single-supply operation below 5V, the PI5A317/318/319 are also recommended.

Features
• Low On-Resistance (33Ω typ) Minimizes Distortion and Error Voltages
• Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ
• Single-Supply Operation (+2.5V to +16V)
• Improved Second Sources for MAX4501/MAX4502
• On-Resistance Matching Between Channels, <2Ω
• On-Resistance Flatness, <6Ω max
• Low Off-Channel Leakage, <5nA @ +85oC
• TTL/CMOS Logic Compatible
• Fast Switching Speed, tON < 150ns
• Guaranteed Break-Before-Make action (PS303 only) eliminates momentary crosstalk
• Rail-to-Rail Analog Signal Dynamic Range
• Low Power Consumption, <5µW
• MSOP Package minimizes board area

Applications
• Audio, Video Switching and Routing
• Portable Instruments
• Data Acquisition Systems
• Sample-and-Holds
• Telecommunication Systems
• Battery-Powered Systems