datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  EM636165TS- Datasheet

EM636165TS-

  

Datasheet PDF

Match, Like EM636165TS-5 EM636165TS-6 EM636165TS-7 EM636165TS-8
Start with EM636165TS-1* EM636165TS-5* EM636165TS-6* EM636165TS-7* EM636165TS-8*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
Etron
Etron Technology
EM636165TS-5 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-5 PDF
Etron
Etron Technology
EM636165TS-8 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-8 PDF
Etron
Etron Technology
EM636165TS-7 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-7 PDF
Etron
Etron Technology
EM636165TS-6 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-6 PDF
Etron
Etron Technology
EM636165TS-7G 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-7G PDF
Etron
Etron Technology
EM636165TS-8I 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 5/5.5/6.5/7.5 ns
· Fast clock rate: 166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· Single +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· Lead Free Package available

 


other parts : EM636165-XXI  EM636165TS-10I  EM636165TS-10IG  EM636165TS-6I  EM636165TS-6IG  EM636165TS-7I  EM636165TS-7IG  EM636165TS-8IG  
EM636165TS-8I PDF
Etron
Etron Technology
EM636165TS-6G 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-6G PDF
Etron
Etron Technology
EM636165TS-7L 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-7L PDF
Etron
Etron Technology
EM636165TS-10 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-10 PDF
Etron
Etron Technology
EM636165TS-5G 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-5G PDF
Etron
Etron Technology
EM636165TS-7I 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 5/5.5/6.5/7.5 ns
· Fast clock rate: 166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· Single +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· Lead Free Package available

 


other parts : EM636165-XXI  EM636165TS-10I  EM636165TS-10IG  EM636165TS-6I  EM636165TS-6IG  EM636165TS-7IG  EM636165TS-8I  EM636165TS-8IG  
EM636165TS-7I PDF
Etron
Etron Technology
EM636165TS-55 1Mega x 16 Synchronous DRAM (SDRAM)

Overview
The EM636165 SDRAM is a high-speed CMOS synchronous DRAM containing 16 Mbits. It is internally configured as a dual 512K word x 16 DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK). Each of the 512K x 16 bit banks is organized as 2048 rows by 256 columns by 16 bits. Read and write accesses to the SDRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of a BankActivate command which is then followed by a Read or Write command.
The EM636165 provides for programmable Read or Write burst lengths of 1, 2, 4, 8, or full page, with a burst termination option. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst sequence. The refresh functions, either Auto or Self Refresh are easy to use. By having a programmable mode register, the system can choose the most suitable modes to maximize its performance. These devices are well suited for applications requiring high memory bandwidth and particularly well suited to high performance PC applications

Features
· Fast access time: 4.5/5/5/5.5/6.5/7.5 ns
· Fast clock rate: 200/183/166/143/125/100 MHz
· Self refresh mode: standard and low power
· Internal pipelined architecture
· 512K word x 16-bit x 2-bank
· Programmable Mode registers
   - CAS# Latency: 1, 2, or 3
   - Burst Length: 1, 2, 4, 8, or full page
   - Burst Type: interleaved or linear burst
   - Burst stop function
· Individual byte controlled by LDQM and UDQM
· Auto Refresh and Self Refresh
· 4096 refresh cycles/64ms
· CKE power down mode
· JEDEC standard +3.3V±0.3V power supply
· Interface: LVTTL
· 50-pin 400 mil plastic TSOP II package
· 60-ball, 6.4x10.1mm VFBGA package
· Lead Free Package available for both TSOP II and VFBGA

 


other parts : EM636165  EM636165BE  EM636165BE-10G  EM636165BE-55G  EM636165BE-5G  EM636165BE-6G  EM636165BE-7G  EM636165BE-7LG  EM636165BE-8G  EM636165TS  
EM636165TS-55 PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  EM78P156E  EM78P156EH  AP1510  B0540W-7  2N7002KDW  2N7002KDW  2N7002KDW  TP802C04  2N7002K  2N7002S  AH286_07  ZXLD1360Q  EM78566H  ZXT14P12DX  MMBT2907AT  2N7000  2N7002  BAS521  74AHCT125  74HCT08  1SS119  2N7002DWA  1N5711WS-7  ZLLS1000  TSX-4025  TP802C04  M4A  EPVP6200  BSS8402DW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  555  2N7002MTF  2N7002KDW  2N7002KDW  2N7002DW  2N7002  2N7002  2N7002  2N7002  2N7002  2N7002  2N7002  2N7002  2N7002  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]