These high power 10 W Zener diodes represented by the JEDEC registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A series provide voltage regulation in a selection over a 3.9 V to 200 V broad range of voltages. They may be operated up to 10 W with adequate mounting and heat sinking with their low thermal resistance. These Zeners are also available in JAN, JANTX, JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower
Actel FPGA Description
The Actel families of FPGAs offer a variety of packages, speed/performance characteristics, and processing levels for use in all high reliability and military applications. Devices are implemented in a silicon gate, two-level metal CMOS process, utilizing Actel’s PLICE antifuse technology. This unique architecture offers gate array flexibility, high performance, and quick turnaround through user programming. Device utilization is typically 95 percent of
• Hermetically Glass Sealed
• High Power Dissipation 5W
• Tight Voltage Tolerance 5%
• For other Voltage, Power, or Tolerance Consult Factory.
• TX, TXV, and S-Level Screening Available 5/.
• Replacement for 1N4954 – 1N4996
■ GENERAL DESCRIPTION
ELM99xxxA series is CMOS voltage regulator providing large current. It consists of devices including reference voltage source, error amplifier, low resistance output transistor, short-circuit protection circuit, output voltage setting resistor, chip-enable circuit. Output voltage is fixed internally with high accuracy. ELM99xxxA provides excellent characteristics, such as small input-output voltage difference due to low resistance output transistor, high load
The UC1637 is a pulse width modulator circuit intended to be used for a variety of PWM motor drive and amplifier applications requiring either uni-directional or bi-directional drive circuits. When used to replace conventional drivers, this circuit can increase efficiency and reduce component costs for many applications. All necessary circuitry is included to generate an analog error signal and modulate two bi-directional pulse train outputs in proportion to the error
The JEDEC registered 1N2970B through 1N3015B and 1N3993A through 1N3998A series are 10W Zener diodes with voltage regulation values between 3.9 and 200V. They are available in JAN, JANTX, and JANTXV military qualification grades on most voltage values.
3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
These octal flip-flops are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
The eight flip-flops of the ’LVTH374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.
• Support Mixed-Mode Signal Operation (5-V Input and
LoPAC Family PFC Mini, PFC Micro, PFC MicroS Power Factor Corrected, AC-DC Switchers
The PFC MicroS, PFC Micro and PFC Mini are members of the new low profile, high-density LoPAC series of power factor corrected AC-DC power supplies. Available as a one, two or three slot package, respectively, each LoPAC slot can be configured with standard Vicor DC-DC converter modules enabling up to six user
specifiable isolated outputs in a package only 1.75'' (44.5mm) high with a power density of 11W/in3.