datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  8581 Datasheet

8581

  

Datasheet PDF

Match, Like 8581
Start with N/A
End *A8581 *38581 *C8581 *-8581 *X8581 *M8581
Included *98581* *A8581* *-8581* *F8581*

View Details

Manufacturer Part no Description View
HOLTIC
Holt Integrated Circuits
HI-8581CJT-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  HI-8581PJI-10  
HI-8581CJT-10 PDF
HOLTIC
Holt Integrated Circuits
HI-8581PQI-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PQI-10 PDF
Holt
Holt Integrated Circuits
HI-8581CJTF-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581PJI  HI-8581PJI-10  
HI-8581CJTF-10 PDF
Holt
Holt Integrated Circuits
HI-8581PQIF-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PQIF-10 PDF
HOLTIC
Holt Integrated Circuits
HI-8581PQTF ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PQTF PDF
Philips
Philips Electronics
PCF8581CT_F4 128 × 8-bit EEPROM with I2C-bus interface

GENERAL DESCRIPTION
The PCA8581 and PCA8581C are low power CMOS EEPROMs with standard and wide operating voltages:

4.5 to 5.5 V (PCA8581)
2.5 to 6.0 V (PCA8581C).

In the following text, the generic term ‘PCA8581’ is used to refer to both types in all packages except when otherwise specified.
The PCA8581 is organized as 128 words of 8-bytes. Addresses and data are transferred serially via a two-line bidirectional bus (I2C-bus). The built-in word address register is incremented automatically after each written or read data byte. All bytes can be read in a single operation. Up to 8 bytes can be written in one operation, reducing the total write time per byte. Three address pins, A0, A1 and A2 are used to define the hardware address, allowing the use of up to 8 devices connected to the bus without additional hardware.

FEATURES
• Operating supply voltage:
   – 4.5 to 5.5 V (PCA8581)
   – 2.5 to 6.0 V (PCA8581C)
• Integrated voltage multiplier and timer for writing
   (no external components required)
• Automatic erase before write
• Low standby current; maximum 10 µA
• 8-byte page write mode
• Serial input/output bus (I2C-bus)
• Address by 3 hardware address pins
• Automatic word address incrementing
• Designed for minimum 10000 write cycles per byte
• 10 years minimum non-volatile data retention
• Infinite number of read cycles
• Pin and address compatibility to PCF8570C and PCF8582
• Operating ambient temperature: −25 to +85 °C.


other parts : PCA8581  PCA8581C  PCA8581CP  PCA8581CT  PCA8581CT/F6  PCA8581P  PCA8581T  PCA8581T/F6  PCA8581T/F6L  PCF8581CT/F4  
PCF8581CT_F4 PDF
Philips
Philips Electronics
PCA8581T/F6 128 × 8-bit EEPROM with I2C-bus interface

GENERAL DESCRIPTION
The PCA8581 and PCA8581C are low power CMOS EEPROMs with standard and wide operating voltages:

4.5 to 5.5 V (PCA8581)
2.5 to 6.0 V (PCA8581C).

In the following text, the generic term ‘PCA8581’ is used to refer to both types in all packages except when otherwise specified.
The PCA8581 is organized as 128 words of 8-bytes. Addresses and data are transferred serially via a two-line bidirectional bus (I2C-bus). The built-in word address register is incremented automatically after each written or read data byte. All bytes can be read in a single operation. Up to 8 bytes can be written in one operation, reducing the total write time per byte. Three address pins, A0, A1 and A2 are used to define the hardware address, allowing the use of up to 8 devices connected to the bus without additional hardware.

FEATURES
• Operating supply voltage:
   – 4.5 to 5.5 V (PCA8581)
   – 2.5 to 6.0 V (PCA8581C)
• Integrated voltage multiplier and timer for writing
   (no external components required)
• Automatic erase before write
• Low standby current; maximum 10 µA
• 8-byte page write mode
• Serial input/output bus (I2C-bus)
• Address by 3 hardware address pins
• Automatic word address incrementing
• Designed for minimum 10000 write cycles per byte
• 10 years minimum non-volatile data retention
• Infinite number of read cycles
• Pin and address compatibility to PCF8570C and PCF8582
• Operating ambient temperature: −25 to +85 °C.


other parts : PCA8581  PCA8581C  PCA8581CP  PCA8581CT  PCA8581CT/F6  PCA8581P  PCA8581T  PCA8581T/F6L  PCF8581CT/F4  PCF8581CT_F4  
PCA8581T/F6 PDF
HOLTIC
Holt Integrated Circuits
HI-8581PJI-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PJI-10 PDF
Holt
Holt Integrated Circuits
HI-8581PJIF-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PJIF-10 PDF
HOLTIC
Holt Integrated Circuits
HI-8581PJTF ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  
HI-8581PJTF PDF
Holt
Holt Integrated Circuits
HI-8581CJI-10 ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  HI-8581PJI-10  
HI-8581CJI-10 PDF
HOLTIC
Holt Integrated Circuits
HI-8581CJT ARINC 429 Transmitter with Line Driver and Dual Receivers

GENERAL DESCRIPTION
The HI-8581 and HI-8589 from Holt Integrated Circuits are silicon gate CMOS devices for interfacing a 16-bit parallel data bus directly to the ARINC 429 serial bus. Both devices provide two receivers, an independent transmitter and line driver capability in a single package. The receiver input circuitry and logic are designed to meet the ARINC 429 specifications for loading, level detection, timing, and protocol. The transmitter section provides the ARINC 429 communication protocol and the line driver circuits provide the ARINC 429 output levels.
The 16-bit parallel data bus exchanges the 32-bit ARINC data word in two steps when either loading the transmitter or interrogating the receivers. The data bus interfaces with CMOS and TTL.
The HI-8581 has 37.5 ohms in series with each line driver output. The HI-8589 provides the option to bypass most of the internal output resistance so that external series resistance may be added for lighting protection and still match the 75 ohm characteristic impedance of the ARINC bus.

FEATURES
• ARINC specification 429 compliant
• Direct receiver and transmitter interface to ARINC bus in a single device
• 16-Bit parallel data bus
• Timing control 10 times the data rate
• Selectable data clocks
• Receiver error rejection per ARINC 429 standard
• Automatic transmitter data timing
• Parity functions
• Low power
• Self test mode
• Industrial & extended temperature ranges

 


other parts : HI-8581  HI-8581CJI  HI-8581CJI-10  HI-8581CJIF  HI-8581CJIF-10  HI-8581CJT-10  HI-8581CJTF  HI-8581CJTF-10  HI-8581PJI  HI-8581PJI-10  
HI-8581CJT PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SB020  PCA-COM232-00A1E  NJU3553M  NCP7815TG  ER804F_09  ER804_02  BUZ271  IXXR110N65B4H1  SN74ACT08-EP  SIHB10N40D-GE3  TDA8133_94  TDA8133  SML-LXR85SRC-TR  CRCW0805150KFKEB  SML-LXR85SRC-TR_11  NXA66  MBR10100CT-E3/45  SB030  2023  FDPF8N60ZUT  YB1520  TC1188  SN74ACT08DBRE4  SN74ACT08DB  SB0203EJ  S6B0741  PHP5N40  PD488588FF  NXA66-12P3V3CY  MSM6240  MA4SW301  LT1173CS8-5  LB1760  IRF3709ZCS  IRF3709ZCSPBF  IRF3709ZPBF  IRF3709Z  GP02-40-LFR  GBPC5010M  BQ2114LB-XXX  BD4210EKN  AT45DB081D-SU  AT45DB081D  AT45DB081B-RC  AT45DB081A  AT45DB081  AN7289NFBQ  AN7280S  AN7289  ADM1810-15ART-RL7  TDA2030A  Part List  Manufacturers List 
  


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]