datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  4520 Datasheet

4520

  

Datasheet PDF

Match, Like N/A
Start with 45204* 45206* 45208*
End *84520 *Z4520 *24520 *64520 *T4520 *C4520 *A4520 *D4520 *R4520 *-4520 *U4520 */4520 *M4520 *K4520 *34520 *F4520 *S4520
Included *S4520* *M4520* *C4520* *F4520* *14520* *D4520* *K4520* *64520* *84520* *L4520* *A4520* *T4520* *X4520* *34520*

View Details

Manufacturer Part no Description View
Microchip
Microchip Technology
PIC18LF4520 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

DEVICE OVERVIEW
This document contains device specific information for the following devices:

• PIC18F2420 • PIC18LF2420
• PIC18F2520 • PIC18LF2520
• PIC18F4420 • PIC18LF4420
• PIC18F4520 • PIC18LF4520

This family offers the advantages of all PIC18 micro controllers – namely, high computational performance at an economical price – with the addition of high endurance, Enhanced Flash program memory. On top of these features, the PIC18F2420/2520/4420/4520 family introduces design enhancements that make these microcontrollers a logical choice for many high performance, power sensitive applications.

Power Managed Modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Idle mode currents down to 5.8 µA typical
• Sleep mode current down to 0.1 µA typical
• Timer1 Oscillator: 1.8 µA, 32 kHz, 2V
• Watchdog Timer: 2.1 µA
• Two-Speed Oscillator Start-up

Peripheral Highlights:
• High-current sink/source 25 mA/25 mA
• Three programmable external interrupts
• Four input change interrupts
• Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
• Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only):
  - One, two or four PWM outputs
  - Selectable polarity
  - Programmable dead time
  - Auto-Shutdown and Auto-Restart
• Master Synchronous Serial Port (MSSP) module
supporting 3-wire SPI™ (all 4 modes) and I2C™ Master and Slave Modes
• Enhanced Addressable USART module:
  - Supports RS-485, RS-232 and LIN 1.2
  - RS-232 operation using internal oscillator block (no external crystal required)
  - Auto-Wake-up on Start bit
  - Auto-Baud Detect
• 10-bit, up to 13-channel Analog-to-Digital Converter module (A/D):
 - Auto-acquisition capability
 - Conversion available during Sleep
• Dual analog comparators with input multiplexing)

Flexible Oscillator Structure:
• Four Crystal modes, up to 40 MHz
• 4X Phase Lock Loop (available for crystal and internal oscillators)
• Two External RC modes, up to 4 MHz
• Two External Clock modes, up to 40 MHz
• Internal oscillator block:
  - 8 user selectable frequencies, from 31 kHz to 8 MHz
  - Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
  - User tunable to compensate for frequency drift
• Secondary oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
  - Allows for safe shutdown if peripheral clock stops

Special Microcontroller Features:
• C compiler optimized architecture:
- Optional extended instruction set designed to optimize re-entrant code
• 100,000 erase/write cycle Enhanced Flash program memory typical
• 1,000,000 erase/write cycle Data EEPROM memory typical
• Flash/Data EEPROM Retention: 100 years typical
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
• Single-supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via two pins
• Wide operating voltage range: 2.0V to 5.5V
• Programmable 16-level High/Low-Voltage

Detection (HLVD) module:
  - Supports interrupt on High/Low-Voltage Detection
• Programmable Brown-out Reset (BOR
  - With software enable option


other parts : PIC18F2420  PIC18F2420-E/ML  PIC18F2420-E/P  PIC18F2420-E/PT  PIC18F2420-E/SO  PIC18F2420-E/SP  PIC18F2420-EML  PIC18F2420-EP  PIC18F2420-EPT  PIC18F2420-ESO  
PIC18LF4520 PDF
Renesas
Renesas Electronics
HD74HC4520 Dual BCD Up Counters / Dual Binary Up Counters

Description
The HD74HC4518 dual BCD counter and the HD74HC4520 dual binary counter consist of two identical, independent, internally synchronous 4-stage counters. The counter stages are type D flip-flops, with interchangeable Clock and Enable lines for incrementing on either the positive-goingor negative-going transition as required when cascading multiple stages. Each counter can be cleared by applying a high level on the Reset line. In addition, the HD74HC4518 will count out of all undefined states within two clock periods. These complementary MOS up counters find primary use in multi-stage synchronous or ripple counting applications requiring low power dissipation and/or high noise immunity.

Features
•  High Speed Operation
•  High Output Current: Fanout of 10 LSTTL Loads
•  Wide Operating Voltage: VCC= 2 to 6 V
•  Low Input Current: 1 µA max
•  Low Quiescent Supply Current: ICC(static) = 4 µA max (Ta = 25°C)


other parts : HD74HC4518  HD74HC4518FPEL  HD74HC4518P  HD74HC4520FPEL  HD74HC4520P  HD74HC4520RPEL  
HD74HC4520 PDF
ZSELEC
Zibo Seno Electronic Engineering Co.,Ltd
SZ4520 2.0W SILICON ZENER DIODE

Features
● Complete Voltage Range 2.7 to 330 Volts
● High peak reverse power dissipation
● High reliability
● Low leakage current
● ± 10% tolerance


other parts : 2EZ2.7D5  SZ452H  2EZ3.0D5  SZ453A  2EZ3.3D5  SZ453D  2EZ3.6D5  SZ453G  2EZ3.9D5  SZ453J  
SZ4520 PDF
TDK
TDK Corporation
ACM4520 Common Mode Filters For power line

ACM Series ACM4520

FEATURES
• Several large current products are prepared to correspond to the various applications.
• Low profile and compact shape, it is suited for surface mounting.
• It shows high common mode impedance despite of its compact shape.

APPLICATIONS
  Radiation noise suppression for power line (DVC, DVD cam, DSC, etc.)

ACM Series ACM3225, 4532, 7060, 9070, 1211, 1513

FEATURES
• A chip-type common mode filter for large current applications. Common mode impedance surpasses 300 to 1000Ω at 100MHz. Noise is greatly suppressed.
• Capable of handling the highest current (up to 10A) of any chip type common mode filter.
• Height and size have been considered, resulting in a compact and light-weight choke coil. Applicable for the miniaturization required to reduce the size and weight of portable equipment.
• The products contain no lead and also support lead-free soldering.
• This product does not contain regulated substances that are slated to be included in RoHS.

APPLICATIONS
   Used for power line noise suppression for any electronic devices Used to counter adapter/battery line noise for relatively large electronic devices such as notebook PCs, stand-alone word proces sors, etc


other parts : ACM1211  ACM1211-102-2PL-T  ACM1211-102-2PL-TL  ACM1211-102-2PL-TL01  ACM1211-301-2PL-T  ACM1211-301-2PL-TL  ACM1211-551-2PL-T  ACM1211-551-2PL-TL  ACM1211-701-2PL-T  ACM1211-701-2PL-TL  
ACM4520 PDF
Philips
Philips Electronics
74HCHCT4520 Dual 4-bit synchronous binary counter

GENERAL DESCRIPTION
The 74HC/HCT4520 are high-speed Si-gate CMOS devices and are pin compatible with the “4520” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4520 are dual 4-bit internally synchronous binary counters with an active HIGH clock input (nCP0) and an active LOW clock input (nCP1), buffered outputs from all four bit positions (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset input (nMR).
The counter advances on either the LOW-to-HIGH transition of nCP0 if nCP1 is HIGH or the HIGH-to-LOW transition of nCP1 if nCP0 is LOW. Either nCP0 or nCP1 may be used as the clock input to the counter and the other clock input may be used as a clock enable input. A HIGH on nMR resets the counter (nQ0 to nQ3 = LOW) independent of nCP0 and nCP1.

FEATURES
• Output capability: standard
• ICC category: MSI

APPLICATIONS
• Multistage synchronous counting
• Multistage asynchronous counting
• Frequency dividers


other parts : 74HCT4520D  74HCT4520DB  74HCT4520N  74HCT4520U  74HCT4520  74HC4520  74HC4520D  74HC4520DB  74HC4520N  74HC4520PW  
74HCHCT4520 PDF
NXP
NXP Semiconductors.
74HCHCT4520 Dual 4-bit synchronous binary counter

GENERAL DESCRIPTION
The 74HC/HCT4520 are high-speed Si-gate CMOS devices and are pin compatible with the “4520” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4520 are dual 4-bit internally synchronous binary counters with an active HIGH clock input (nCP0) and an active LOW clock input (nCP1), buffered outputs from all four bit positions (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset input (nMR).
The counter advances on either the LOW-to-HIGH transition of nCP0 if nCP1 is HIGH or the HIGH-to-LOW transition of nCP1 if nCP0 is LOW. Either nCP0 or nCP1 may be used as the clock input to the counter and the other clock input may be used as a clock enable input. A HIGH on nMR resets the counter (nQ0 to nQ3 = LOW) independent of nCP0 and nCP1.

FEATURES
• Output capability: standard
• ICC category: MSI

APPLICATIONS
• Multistage synchronous counting
• Multistage asynchronous counting
• Frequency dividers


other parts : 74HCT4520N,112  74HC4520  74HC4520D  74HC4520DB  74HC4520N  74HC4520PW  74HCT4520  74HCT4520D  74HCT4520DB  74HCT4520N  
74HCHCT4520 PDF
Philips
Philips Electronics
74HCT4520 Dual 4-bit synchronous binary counter

GENERAL DESCRIPTION
The 74HC/HCT4520 are high-speed Si-gate CMOS devices and are pin compatible with the “4520” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4520 are dual 4-bit internally synchronous binary counters with an active HIGH clock input (nCP0) and an active LOW clock input (nCP1), buffered outputs from all four bit positions (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset input (nMR).
The counter advances on either the LOW-to-HIGH transition of nCP0 if nCP1 is HIGH or the HIGH-to-LOW transition of nCP1 if nCP0 is LOW. Either nCP0 or nCP1 may be used as the clock input to the counter and the other clock input may be used as a clock enable input. A HIGH on nMR resets the counter (nQ0 to nQ3 = LOW) independent of nCP0 and nCP1.

FEATURES
• Output capability: standard
• ICC category: MSI

APPLICATIONS
• Multistage synchronous counting
• Multistage asynchronous counting
• Frequency dividers


other parts : 74HCT4520D  74HCT4520DB  74HCT4520N  74HCT4520U  74HC4520  74HC4520D  74HC4520DB  74HC4520N  74HC4520PW  74HCHCT4520  
74HCT4520 PDF
Kexin
KEXIN Industrial
2SC4520 NPN Epitaxial Planar Silicon Transistor

Features
• Adoption of FBET, MBIT process.
• Large current capacity.
• Low collector-to-emitter saturation voltage.
• Fast switching speed.
• Small-sized package.

 


other parts : 2SC4520R  2SC4520S  2SC4520T  
2SC4520 PDF
Fairchild
Fairchild Semiconductor
MV64520 CLEAR LENS T-1¾ SOLID STATE LAMPS


other parts : MV64521  MV5152  MV6152  MV5352  MV6352  MV5452  MV5752  MV6752  
MV64520 PDF
Microchip
Microchip Technology
PIC18F4520 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

DEVICE OVERVIEW
This document contains device specific information for the following devices:

• PIC18F2420 • PIC18LF2420
• PIC18F2520 • PIC18LF2520
• PIC18F4420 • PIC18LF4420
• PIC18F4520 • PIC18LF4520

This family offers the advantages of all PIC18 micro controllers – namely, high computational performance at an economical price – with the addition of high endurance, Enhanced Flash program memory. On top of these features, the PIC18F2420/2520/4420/4520 family introduces design enhancements that make these microcontrollers a logical choice for many high performance, power sensitive applications.

Power Managed Modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Idle mode currents down to 5.8 µA typical
• Sleep mode current down to 0.1 µA typical
• Timer1 Oscillator: 1.8 µA, 32 kHz, 2V
• Watchdog Timer: 2.1 µA
• Two-Speed Oscillator Start-up

Peripheral Highlights:
• High-current sink/source 25 mA/25 mA
• Three programmable external interrupts
• Four input change interrupts
• Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
• Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only):
  - One, two or four PWM outputs
  - Selectable polarity
  - Programmable dead time
  - Auto-Shutdown and Auto-Restart
• Master Synchronous Serial Port (MSSP) module
supporting 3-wire SPI™ (all 4 modes) and I2C™ Master and Slave Modes
• Enhanced Addressable USART module:
  - Supports RS-485, RS-232 and LIN 1.2
  - RS-232 operation using internal oscillator block (no external crystal required)
  - Auto-Wake-up on Start bit
  - Auto-Baud Detect
• 10-bit, up to 13-channel Analog-to-Digital Converter module (A/D):
 - Auto-acquisition capability
 - Conversion available during Sleep
• Dual analog comparators with input multiplexing)

Flexible Oscillator Structure:
• Four Crystal modes, up to 40 MHz
• 4X Phase Lock Loop (available for crystal and internal oscillators)
• Two External RC modes, up to 4 MHz
• Two External Clock modes, up to 40 MHz
• Internal oscillator block:
  - 8 user selectable frequencies, from 31 kHz to 8 MHz
  - Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
  - User tunable to compensate for frequency drift
• Secondary oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
  - Allows for safe shutdown if peripheral clock stops

Special Microcontroller Features:
• C compiler optimized architecture:
- Optional extended instruction set designed to optimize re-entrant code
• 100,000 erase/write cycle Enhanced Flash program memory typical
• 1,000,000 erase/write cycle Data EEPROM memory typical
• Flash/Data EEPROM Retention: 100 years typical
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
• Single-supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via two pins
• Wide operating voltage range: 2.0V to 5.5V
• Programmable 16-level High/Low-Voltage

Detection (HLVD) module:
  - Supports interrupt on High/Low-Voltage Detection
• Programmable Brown-out Reset (BOR
  - With software enable option


other parts : PIC18F2420  PIC18F2420-E/ML  PIC18F2420-E/P  PIC18F2420-E/PT  PIC18F2420-E/SO  PIC18F2420-E/SP  PIC18F2420-EML  PIC18F2420-EP  PIC18F2420-EPT  PIC18F2420-ESO  
PIC18F4520 PDF
ETC
Unspecified
ADAM-4520 Addressable RS-422/485 to RS-232 Converter

RS-422/485 Repeater

RS-232 to RS-422/485 Converter Addressable RS-422/485 to RS-232 Converter


other parts : ADAM-4510  ADAM-4521  ADAM-4522  
ADAM-4520 PDF
NXP
NXP Semiconductors.
74HCT4520 Dual 4-bit synchronous binary counter

GENERAL DESCRIPTION
The 74HC/HCT4520 are high-speed Si-gate CMOS devices and are pin compatible with the “4520” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4520 are dual 4-bit internally synchronous binary counters with an active HIGH clock input (nCP0) and an active LOW clock input (nCP1), buffered outputs from all four bit positions (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset input (nMR).
The counter advances on either the LOW-to-HIGH transition of nCP0 if nCP1 is HIGH or the HIGH-to-LOW transition of nCP1 if nCP0 is LOW. Either nCP0 or nCP1 may be used as the clock input to the counter and the other clock input may be used as a clock enable input. A HIGH on nMR resets the counter (nQ0 to nQ3 = LOW) independent of nCP0 and nCP1.

FEATURES
• Output capability: standard
• ICC category: MSI

APPLICATIONS
• Multistage synchronous counting
• Multistage asynchronous counting
• Frequency dividers


other parts : 74HCT4520N,112  74HC4520  74HC4520D  74HC4520DB  74HC4520N  74HC4520PW  74HCHCT4520  74HCT4520D  74HCT4520DB  74HCT4520N  
74HCT4520 PDF

1

234

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  2SD388  TDA10085HT  BT137F-800E  2N6764  BA489  TW8816  TW8816_08  S20C80  L9338_13  1507-50B  IRF7304QPBF  FJN3303FBU  TA8429H  L9338MD  IRU1075CP  IRF7304PBF  IRF7304  IDT71V016S15PHI  HD404019S  G768  BFQ235A  BB152  AN6545SP  PSP1045  G768D  NJU9702D  G768B  2SJ460-T/JM  FMMT5179  LB1643  IS4N45  HP4410DY  BA220  RB521S-30  FS4KM-12  DTA123EKA  DTA123E_05  UDN2585A  1DL42A  MSK4470D  IRF3415SPBF  IRF3415PBF  IRF3415  BQ24753A  BD6761FS_09  ADC1225CCD  ZTX689B  UDZ5.1B  PQ1CF1  PHD71NQ03LT  TDA2030A  Part List  Manufacturers List 
  


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]