datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  306D Datasheet

306D

  

Datasheet PDF

Match, Like N/A
Start with 306DC*
End *3306D *P306D *M306D *K306D *A306D *F306D
Included *1306D* *R306D* *2306D* *3306D* *K306D* *A306D* *M306D*

View Details

Manufacturer Part no Description View
TI
Texas Instruments
SN74CBT3306DE4 DUAL FET BUS SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

 


other parts : SN74CBT3306  SN74CBT3306D  SN74CBT3306DG4  SN74CBT3306DR  SN74CBT3306DRE4  SN74CBT3306DRG4  SN74CBT3306PW  SN74CBT3306PWE4  SN74CBT3306PWG4  SN74CBT3306PWLE  
SN74CBT3306DE4 PDF
TI
Texas Instruments
SN74CBT3306DR DUAL FET BUS SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

 


other parts : SN74CBT3306  SN74CBT3306D  SN74CBT3306DE4  SN74CBT3306DG4  SN74CBT3306DRE4  SN74CBT3306DRG4  SN74CBT3306PW  SN74CBT3306PWE4  SN74CBT3306PWG4  SN74CBT3306PWLE  
SN74CBT3306DR PDF
TOKEN
Token Electronics Industry Co., Ltd.
TSR306D00-D2 SAW Resonators (TSR) Can Replace LC Elements and Quartz Crystals

Token SAW Resonator employs surface acoustic wave, and is able to be applied to high frequency circuit where conventional crystal, ceramic resonators are not available, as SAW Resonator oscillates stably with its fundamental mode over frequency range from 200 MHz to around 1 GHz.
The SAW resonator uses arrays of metal strips, with pitch λ/2, as reflectors of the waves. These arrays can give strong SAW reflections, and two arrays can be used to form a SAW cavity with high Q. Such resonators are often used for high-stability oscillators.


other parts : TSR1090D00-D1  TSR217D25-D1  TSR224D50-D2  TSR224D70-D1  TSR265D00-D1  TSR284D00-D1  TSR288D00-D1  TSR293D125-S5  TSR295D00-D1  TSR300D00A-D1  
TSR306D00-D2 PDF
TI
Texas Instruments
SN74CBT3306DRE4 DUAL FET BUS SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

 


other parts : SN74CBT3306  SN74CBT3306D  SN74CBT3306DE4  SN74CBT3306DG4  SN74CBT3306DR  SN74CBT3306DRG4  SN74CBT3306PW  SN74CBT3306PWE4  SN74CBT3306PWG4  SN74CBT3306PWLE  
SN74CBT3306DRE4 PDF
TI
Texas Instruments
SN74CBT3306DG4 DUAL FET BUS SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

 


other parts : SN74CBT3306  SN74CBT3306D  SN74CBT3306DE4  SN74CBT3306DR  SN74CBT3306DRE4  SN74CBT3306DRG4  SN74CBT3306PW  SN74CBT3306PWE4  SN74CBT3306PWG4  SN74CBT3306PWLE  
SN74CBT3306DG4 PDF
TI
Texas Instruments
SN74CBT3306DRG4 DUAL FET BUS SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

 


other parts : SN74CBT3306  SN74CBT3306D  SN74CBT3306DE4  SN74CBT3306DG4  SN74CBT3306DR  SN74CBT3306DRE4  SN74CBT3306PW  SN74CBT3306PWE4  SN74CBT3306PWG4  SN74CBT3306PWLE  
SN74CBT3306DRG4 PDF
TI
Texas Instruments
8102306DA QUAD LOW-NOISE JFET-INPUT GENERAL-PURPOSE OPERATIONAL AMPLIFIER

DescriptionThe JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single monolithic chip.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from −40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of −55°C to 125°C.
Features
1. Low Power Consumption
2. Wide Common-Mode and Differential Volt Ranges
3. Low Input Bias and Offset Currents
4. Output Short-Circuit Protection
5. Low Total Harmonic Distortion: 0.003% Ty
6. Low Noise Vn= 18 nV/√Hz Typ at f = 1 kHz
7. High Input Impedance: JFET Input Stage
8. Internal Frequency Compensation
9. Latch-Up-Free Operation


other parts : 071AC  071BC  072AC  072BC  8102304HA  81023052A  8102305HA  8102305PA  81023062A  8102306CA  
8102306DA PDF
MACOM
Tyco Electronics
MTA306DPC TOGGLE SWITCH

TOGGLE SWITCH


other parts : 1-1437558-5  1-1437558-7  1-1437558-8  1-1437558-9  1437626-2  2-1437558-4  2-1437558-6  3-1437558-3  B10482  MTA106DPC  
MTA306DPC PDF
Anachip
Anachip Corporation
AP1306D-SA Two Coil Fan Motor Predriver

General Description
The AP1306 fan motor predriver is suited for two-coil brush-less DC fan. All functions, including lock shutdown, automatic restart, speed indication (FG), have been incorporated into one chip. When the motor is under lock condition, lock shutdown function turns off the output. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the FG function is to indicate the rotation speed.

Features
- Compatible to a Hall element
- Operating voltage (VCC) : 4V to 28V
- Lock shutdown and automatic restart
- Speed indication (FG) output
- Output current IO=70mA (max)
- Operating temperature (Topr) : -30ºC to +85ºC
- SOP8 package
- Include Thermal Shutdown circuit

Application
- High voltage, high current brushless DC fan


other parts : AP1306  AP1306-S  AP1306-SA  AP1306-SL  AP1306-SLA  AP1306A-S  AP1306A-SA  AP1306A-SL  AP1306A-SLA  AP1306B-S  
AP1306D-SA PDF
Power-Integrations
Power Integrations, Inc
LNK306DG-TL LinkSwitch-TN Family Lowest Component Count, Energy-Efficient Off-Line Switcher IC

Description
LinkSwitch-TN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency.
LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC. The start up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or flyback converters. The fully integrated auto-restart circuit in the LNK304-306 safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters, if required.

Product Highlights
Cost Effective Linear/Cap Dropper Replacement
• Lowest cost and component count buck converter solution
• Fully integrated auto-restart for short-circuit and open loop fault protection – saves external component costs
• LNK302 uses a simplified controller without auto-restart for very low system cost
• 66 kHz operation with accurate current limit – allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current
• Tight tolerances and negligible temperature variation
• High breakdown voltage of 700 V provides excellent input surge withstand
• Frequency jittering dramatically reduces EMI (~10 dB)
   – minimizes EMI filter cost
• High thermal shutdown temperature (+135 °C minimum)

Much Higher Performance over Discrete Buck and Passive Solutions
• Supports buck, buck-boost and flyback topologies
• System level thermal overload, output short-circuit and open control loop protection
• Excellent line and load regulation even with typical configuration
• High bandwidth provides fast turn-on with no overshoot
• Current limit operation rejects line ripple
• Universal input voltage range (85 VAC to 265 VAC)
• Built-in current limit and hysteretic thermal protection
• Higher efficiency than passive solutions
• Higher power factor than capacitor-fed solutions
• Entirely manufacturable in SMD

EcoSmart®– Extremely Energy Efficient
• Consumes typically only 50/80 mW in self-powered buck topology at 115/230 VAC input with no load (opto feedback)
• Consumes typically only 7/12 mW in flyback topology with external bias at 115/230 VAC input with no load
• Meets California Energy Commission (CEC), Energy Star, and EU requirements

Applications
• Appliances and timers
• LED drivers and industrial controls


other parts : LNK302  LNK304  LNK305  LNK306  LNK302GN  LNK302GN-TL  LNK302GG  LNK302GG-TL  LNK302PN  LNK302PN-TL  
LNK306DG-TL PDF
Power-Integrations
Power Integrations, Inc
LNK306DN-TL LinkSwitch-TN Family Lowest Component Count, Energy-Efficient Off-Line Switcher IC

Description
LinkSwitch-TN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency.
LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC. The start up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or flyback converters. The fully integrated auto-restart circuit in the LNK304-306 safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters, if required.

Product Highlights
Cost Effective Linear/Cap Dropper Replacement
• Lowest cost and component count buck converter solution
• Fully integrated auto-restart for short-circuit and open loop fault protection – saves external component costs
• LNK302 uses a simplified controller without auto-restart for very low system cost
• 66 kHz operation with accurate current limit – allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current
• Tight tolerances and negligible temperature variation
• High breakdown voltage of 700 V provides excellent input surge withstand
• Frequency jittering dramatically reduces EMI (~10 dB)
   – minimizes EMI filter cost
• High thermal shutdown temperature (+135 °C minimum)

Much Higher Performance over Discrete Buck and Passive Solutions
• Supports buck, buck-boost and flyback topologies
• System level thermal overload, output short-circuit and open control loop protection
• Excellent line and load regulation even with typical configuration
• High bandwidth provides fast turn-on with no overshoot
• Current limit operation rejects line ripple
• Universal input voltage range (85 VAC to 265 VAC)
• Built-in current limit and hysteretic thermal protection
• Higher efficiency than passive solutions
• Higher power factor than capacitor-fed solutions
• Entirely manufacturable in SMD

EcoSmart®– Extremely Energy Efficient
• Consumes typically only 50/80 mW in self-powered buck topology at 115/230 VAC input with no load (opto feedback)
• Consumes typically only 7/12 mW in flyback topology with external bias at 115/230 VAC input with no load
• Meets California Energy Commission (CEC), Energy Star, and EU requirements

Applications
• Appliances and timers
• LED drivers and industrial controls


other parts : LNK302  LNK304  LNK305  LNK306  LNK302GN  LNK302GN-TL  LNK302GG  LNK302GG-TL  LNK302PN  LNK302PN-TL  
LNK306DN-TL PDF
TI
Texas Instruments
LM306DRG4 DIFFERENTIAL COMPARATOR WITH STROBES

description
The LM306 is a high-speed voltage comparator with differential inputs, a low-impedance high sink-current (100 mA) output, and two strobe inputs. This device detects low-level analog or digital signals and can drive digital logic or lamps and relays directly. Short-circuit protection and surge-current limiting is provided.

Fast Response Times
Improved Gain and Accuracy
Fanout to 10 Series 54/74 TTL Loads
Strobe Capability
Short-Circuit and Surge Protection
Designed to Be Interchangeable With
National Semiconductor LM306


other parts : LM306  LM306D  LM306DR  LM306DRE4  LM306P  LM306PE4  
LM306DRG4 PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  2SD388  TDA10085HT  BT137F-800E  2N6764  BA489  TW8816  TW8816_08  S20C80  L9338_13  1507-50B  IRF7304QPBF  FJN3303FBU  TA8429H  L9338MD  IRU1075CP  IRF7304PBF  IRF7304  IDT71V016S15PHI  HD404019S  G768  BFQ235A  BB152  AN6545SP  PSP1045  G768D  NJU9702D  G768B  2SJ460-T/JM  FMMT5179  LB1643  IS4N45  HP4410DY  BA220  RB521S-30  FS4KM-12  DTA123EKA  DTA123E_05  UDN2585A  1DL42A  MSK4470D  IRF3415SPBF  IRF3415PBF  IRF3415  BQ24753A  BD6761FS_09  ADC1225CCD  ZTX689B  UDZ5.1B  PQ1CF1  PHD71NQ03LT  TDA2030A  Part List  Manufacturers List 
  


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]