DescriptionThe JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single monolithic chip.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from −40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of −55°C to 125°C.
Features
1. Low Power Consumption
2. Wide Common-Mode and Differential Volt Ranges
3. Low Input Bias and Offset Currents
4. Output Short-Circuit Protection
5. Low Total Harmonic Distortion: 0.003% Ty
6. Low Noise Vn= 18 nV/√Hz Typ at f = 1 kHz
7. High Input Impedance: JFET Input Stage
8. Internal Frequency Compensation
9. Latch-Up-Free Operation

TOGGLE SWITCH

Features
* Low forward voltage drop
* Latest GPP technology with super fast recovery time
* High current capability
* High surge current capability
* Low reverse leakage current

Application
* Automotive Inverters/Solar Inverters
* Plating Power Supply,SMPS,Adapter and UPS
* Car Audio Amplifiers and Sound Device Systems

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

TOGGLE SWITCH

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

description
The LM306 is a high-speed voltage comparator with differential inputs, a low-impedance high-sink-current (100 mA) output, and two strobe inputs. This device detects low-level analog or digital signals and can drive digital logic or lamps and relays directly. Short-circuit protection and surge-current limiting is provided.
A low-level input at either strobe causes the output to remain high regardless of the differential input.When both strobe inputs are either open or at a high logic level, the output voltage is controlled by the differential input voltage. The circuit will operate with any negative supply voltage between −3 V and −12 V with little difference in performance.
The LM306 is characterized for operation from 0°C to 70°C.

● Fast Response Times
● Improved Gain and Accuracy
● Fanout to 10 Series 54/74 TTL Loads
● Strobe Capability
● Short-Circuit and Surge Protection
● Designed to Be Interchangeable With
   National Semiconductor LM306

Token SAW Resonator employs surface acoustic wave, and is able to be applied to high frequency circuit where conventional crystal, ceramic resonators are not available, as SAW Resonator oscillates stably with its fundamental mode over frequency range from 200 MHz to around 1 GHz.
The SAW resonator uses arrays of metal strips, with pitch λ/2, as reflectors of the waves. These arrays can give strong SAW reflections, and two arrays can be used to form a SAW cavity with high Q. Such resonators are often used for high-stability oscillators.

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels

description/ordering information
The SN74CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is high.

 5-Ω Switch Connection Between Two Ports
 TTL-Compatible Input Levels