Features
● Especially suitable for applications from 460 nm to 1080 nm
● High linearity
● SMT package without base connection,
    suitable for vapor phase and IR reflow
    soldering (JEDEC level 4)
● Available only on tape and reel

Applications
● Ambient light detector
● Photointerrupters
● Industrial electronics
● For control and drive circuits

DESCRIPTION
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications.

FEATURES
• Bus-Pin Fault Protection to > ±70 V
• Cable Invert Function Allows Correction for Reversed Bus Pins
• Common-Mode Voltage Range (–20 V to 25 V) More Than Doubles TIA/EIA 485 Requirement
• Bus I/O Protection
– ±16 kV JEDEC HBM Protection
• Reduced Unit Load for Up to 256 Nodes
• Failsafe Receiver for Open-Circuit, Short Circuit and Idle-Bus Conditions
• Low Power Consumption
– ICC 5 mA Quiescent During Operation
• Power-Up, Power-Down Glitch-Free Operation

APPLICATIONS
• Designed for RS-485 and RS-422 Networks

DESCRIPTION
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications.

FEATURES
• Bus-Pin Fault Protection to > ±70 V
• Cable Invert Function Allows Correction for Reversed Bus Pins
• Common-Mode Voltage Range (–20 V to 25 V) More Than Doubles TIA/EIA 485 Requirement
• Bus I/O Protection
– ±16 kV JEDEC HBM Protection
• Reduced Unit Load for Up to 256 Nodes
• Failsafe Receiver for Open-Circuit, Short Circuit and Idle-Bus Conditions
• Low Power Consumption
– ICC 5 mA Quiescent During Operation
• Power-Up, Power-Down Glitch-Free Operation

APPLICATIONS
• Designed for RS-485 and RS-422 Networks

DESCRIPTION
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications.

FEATURES
• Bus-Pin Fault Protection to > ±70 V
• Cable Invert Function Allows Correction for Reversed Bus Pins
• Common-Mode Voltage Range (–20 V to 25 V) More Than Doubles TIA/EIA 485 Requirement
• Bus I/O Protection
– ±16 kV JEDEC HBM Protection
• Reduced Unit Load for Up to 256 Nodes
• Failsafe Receiver for Open-Circuit, Short Circuit and Idle-Bus Conditions
• Low Power Consumption
– ICC 5 mA Quiescent During Operation
• Power-Up, Power-Down Glitch-Free Operation

APPLICATIONS
• Designed for RS-485 and RS-422 Networks

Features:
• Triple Diffused Transistor Chips Incorporated
• Compact Plastic Package with Industry Standard Reliability
• Output Voltage is Pre–Fixed – No External Adjustment is Required

DESCRIPTION
These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model specifications.

FEATURES
• Bus-Pin Fault Protection to > ±70 V
• Cable Invert Function Allows Correction for Reversed Bus Pins
• Common-Mode Voltage Range (–20 V to 25 V) More Than Doubles TIA/EIA 485 Requirement
• Bus I/O Protection
– ±16 kV JEDEC HBM Protection
• Reduced Unit Load for Up to 256 Nodes
• Failsafe Receiver for Open-Circuit, Short Circuit and Idle-Bus Conditions
• Low Power Consumption
– ICC 5 mA Quiescent During Operation
• Power-Up, Power-Down Glitch-Free Operation

APPLICATIONS
• Designed for RS-485 and RS-422 Networks

Features
● Especially suitable for applications from 460 nm to 1080 nm
● High linearity
● SMT package without base connection,
    suitable for vapor phase and IR reflow
    soldering (JEDEC level 4)
● Available only on tape and reel

Applications
● Ambient light detector
● Photointerrupters
● Industrial electronics
● For control and drive circuits

DESCRIPTION
The DSD1796 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and support circuitry in a small 28-lead SSOP package. The data converters use TI’s advanced-segment DAC architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. The DSD1796 provides balanced current outputs, allowing the user to optimize analog performance externally. The DSD1796 accepts the PCM and DSD audio data formats, providing easy interfacing to audio DSP and decoder chips. The DSD1796 also interfaces with external digital filter devices (DF1704, DF1706, PMD200). Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through an SPI serial control port, which supports register write and readback functions. The DSD1796 also supports the time-division-multiplexed command and audio (TDMCA) data format.

FEATURES
● Supports Both DSD and PCM Formats
● 24-Bit Resolution
● Analog Performance:
   − Dynamic Range: 123 dB
   − THD+N: 0.0005%
● Differential Current Output: 4 mA p-p
● 8× Oversampling Digital Filter:
   − Stop-Band Attenuation: –98 dB
   − Pass-Band Ripple: ±0.0002 dB
● Sampling Frequency: 10 kHz to 200 kHz
● System Clock: 128, 192, 256, 384, 512, or
   768 fS With Autodetect
● Accepts 16-, 20-, and 24-Bit Audio Data
● PCM Data Formats: Standard, I2S, and
   Left-Justified
● DSD Format Interface Available
● Interface Available for Optional External
   Digital Filter or DSP
● TDMCA Interface Available
● User-Programmable Mode Controls:
   − Digital Attenuation: 0 dB to –120 dB,
      0.5 dB/Step
   − Digital De-Emphasis
   − Digital Filter Rolloff: Sharp or Slow
   − Soft Mute
● Compatible With DSD1792 (Pins and Mode
   Controls)
● Dual Supply Operation:
   − 5-V Analog, 3.3-V Digital
● 5-V Tolerant Digital Inputs
● Small 28-Lead SSOP Package

APPLICATIONS
● A/V Receivers
● SACD Players
● DVD Players
● HDTV Receivers
● Car Audio Systems
● Digital Multi-Track Recorders
● Other Applications Requiring 24-Bit Audio

DESCRIPTION
The DSD1796 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and support circuitry in a small 28-lead SSOP package. The data converters use TI’s advanced-segment DAC architecture to achieve excellent dynamic performance and improved tolerance to clock jitter. The DSD1796 provides balanced current outputs, allowing the user to optimize analog performance externally. The DSD1796 accepts the PCM and DSD audio data formats, providing easy interfacing to audio DSP and decoder chips. The DSD1796 also interfaces with external digital filter devices (DF1704, DF1706, PMD200). Sampling rates up to 200 kHz are supported. A full set of user-programmable functions is accessible through an SPI serial control port, which supports register write and readback functions. The DSD1796 also supports the time-division-multiplexed command and audio (TDMCA) data format.

FEATURES
● Supports Both DSD and PCM Formats
● 24-Bit Resolution
● Analog Performance:
   − Dynamic Range: 123 dB
   − THD+N: 0.0005%
● Differential Current Output: 4 mA p-p
● 8× Oversampling Digital Filter:
   − Stop-Band Attenuation: –98 dB
   − Pass-Band Ripple: ±0.0002 dB
● Sampling Frequency: 10 kHz to 200 kHz
● System Clock: 128, 192, 256, 384, 512, or
   768 fS With Autodetect
● Accepts 16-, 20-, and 24-Bit Audio Data
● PCM Data Formats: Standard, I2S, and
   Left-Justified
● DSD Format Interface Available
● Interface Available for Optional External
   Digital Filter or DSP
● TDMCA Interface Available
● User-Programmable Mode Controls:
   − Digital Attenuation: 0 dB to –120 dB,
      0.5 dB/Step
   − Digital De-Emphasis
   − Digital Filter Rolloff: Sharp or Slow
   − Soft Mute
● Compatible With DSD1792 (Pins and Mode
   Controls)
● Dual Supply Operation:
   − 5-V Analog, 3.3-V Digital
● 5-V Tolerant Digital Inputs
● Small 28-Lead SSOP Package

APPLICATIONS
● A/V Receivers
● SACD Players
● DVD Players
● HDTV Receivers
● Car Audio Systems
● Digital Multi-Track Recorders
● Other Applications Requiring 24-Bit Audio

Built-in Avalanche Diode for Surge Absorbing Darlington

Application : Driver for Solenoid, Relay and Motor and General Purpose