LC20 Datasheet PDF
Manufacturer |
Part no |
Description |
View |
 Microsemi Corporation |
LC20
|
1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
DESCRIPTION
This hermetically sealed Transient Voltage Suppressor (TVS) product family includes a rectifier diode element in series and opposite direction to achieve low capacitance performance below 100 pF (see Figure 2). The low level of TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics.
FEATURES
• Unidirectional low-capacitance TVS series for flexible thru-hole mounting
• Suppresses transients up to 1500 watts @ 10/1000 µs
• Clamps transient in less than 100 pico seconds
• Working voltage (VWM) range 6.5 V to 170 V
• Hermetic sealed DO-13 metal package
• Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, MSP prefixes respectively to part numbers, e.g. MXLC6.5A, etc.
• Surface mount equivalent packages also available as SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 - SMCGLCE170A in separate data sheet (consult factory for other surface mount options)
• Plastic axial-leaded equivalents available in the LCE6.5 - LCE170A series in separate data sheet
other parts :
JANLC10
JANLC100
JANLC100A
JANLC10A
JANLC11
JANLC110
JANLC110A
JANLC11A
JANLC12
JANLC120
|
|
 Microsemi Corporation |
LC20A
|
1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
DESCRIPTION
This hermetically sealed Transient Voltage Suppressor (TVS) product family includes a rectifier diode element in series and opposite direction to achieve low capacitance performance below 100 pF (see Figure 2). The low level of TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics.
FEATURES
• Unidirectional low-capacitance TVS series for flexible thru-hole mounting
• Suppresses transients up to 1500 watts @ 10/1000 µs
• Clamps transient in less than 100 pico seconds
• Working voltage (VWM) range 6.5 V to 170 V
• Hermetic sealed DO-13 metal package
• Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, MSP prefixes respectively to part numbers, e.g. MXLC6.5A, etc.
• Surface mount equivalent packages also available as SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 - SMCGLCE170A in separate data sheet (consult factory for other surface mount options)
• Plastic axial-leaded equivalents available in the LCE6.5 - LCE170A series in separate data sheet
other parts :
JANLC10
JANLC100
JANLC100A
JANLC10A
JANLC11
JANLC110
JANLC110A
JANLC11A
JANLC12
JANLC120
|
|
 SEOUL SEMICONDUCTOR |
LC201
|
INFRARED LAMP LED
other parts :
LB101
LB111
LB121
LB131
LB141
LB151
LB161
LB171
LB181
LB191
|
|
 SEOUL SEMICONDUCTOR |
LC200Z
|
GREEN OVAL LAMP LED
other parts :
LB100Z
LB130Z
LB140Z
LB150Z
LB160Z
LB170Z
LB180Z
LB190Z
LB200Z
LB220Z
|
|
 Unspecified |
LC2093
|
LC2093 / LC2093-B / 24 Pin
other parts :
LC2093-B
|
|
 Unspecified |
LC2021
|
20 characters x 2 lines
|
|
 Philips Electronics |
LC201V02
|
Liquid Crystal Display
General Description
LC201V02 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally blac k mode. It has a 20.1 inch
diagonally measured active display area with VGA resolution (480 vertical by 640 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, a palette of more than 16,777,216 colors.
It has been designed to apply the 8Bit parallel CMOS interface. It is intended to support LCD TV, PCTV where high brightness, w ide viewing angle, high color saturation, and high color are important.
other parts :
LC201V02-A3
|
|
 Unspecified |
LC2093-B
|
LC2093 / LC2093-B / 24 Pin
other parts :
LC2093
|
|
 California Eastern Laboratories. |
LC202-1K/N
|
SENSOR, LOAD CELL, 1K LB, 2MV/V
|
|
 Philips Electronics |
LC201V02-A3
|
Liquid Crystal Display
General Description
LC201V02 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally blac k mode. It has a 20.1 inch
diagonally measured active display area with VGA resolution (480 vertical by 640 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, a palette of more than 16,777,216 colors.
It has been designed to apply the 8Bit parallel CMOS interface. It is intended to support LCD TV, PCTV where high brightness, w ide viewing angle, high color saturation, and high color are important.
other parts :
LC201V02
|
|
 California Eastern Laboratories. |
LC202-100/N
|
SENSOR, LOAD CELL, 100LB, 2MV/V
|
|
 California Eastern Laboratories. |
LC202-10K/N
|
SENSOR, LOAD CELL, 10K LB, 2MV/V
|
|
|
|