datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  
HOME  >>>  Winbond  >>> Q16DWUUIG PDF

Q16DWUUIG Datasheet PDF - Winbond

Part NameDescriptionManufacturer
Q16DWUUIG 1.8V 16M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI Winbond
Winbond Winbond
Other PDF  2012  
Q16DWUUIG Datasheet PDF : Q16DWUUIG pdf   
W25Q16DW image

GENERAL DESCRIPTION
The W25Q16DW (16M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 1.65V to 1.95V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space saving packages.
The W25Q16DW array is organized into 8,192 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q16DW has 512 erasable sectors and 32 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See figure 2.)
The W25Q16DW support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI as well as 2-clocks instruction cycle Quad Peripheral Interface (QPI): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O and QPI instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification, a 64-bit Unique Serial Number and four 256-bytes Security Registers.

FEATURES
● Family of SpiFlash Memories
   – W25Q16DW: 16M-bit / 2M-byte (2,097,152)
   – Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
   – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
   – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
   – QPI: CLK, /CS, IO0, IO1, IO2, IO3
● Highest Performance Serial Flash
   – 104MHz Standard/Dual/Quad SPI clocks
   – 208/416MHz equivalent Dual/Quad SPI
   – 50MB/S continuous data transfer rate
   – More than 100,000 erase/program cycles
   – More than 20-year data retention
● Efficient “Continuous Read” and QPI Mode
   – Continuous Read with 8/16/32/64-Byte Wrap
   – As few as 8 clocks to address memory
   – Quad Peripheral Interface (QPI) reduces
      instruction overhead
   – Allows true XIP (execute in place) operation
   – Outperforms X16 Parallel Flash
● Low Power, Wide Temperature Range
   – Single 1.65 to 1.95V supply
   – 4mA active current, <1µA Power-down (typ.)
   – -40°C to +85°C operating range
● Flexible Architecture with 4KB sectors
   – Uniform Sector Erase (4K-bytes)
   – Uniform Block Erase (32K and 64K-bytes)
   – Program 1 to 256 byte per programmable page
   – Erase/Program Suspend & Resume
● Advanced Security Features
   – Software and Hardware Write-Protect
   – Top/Bottom, 4KB complement array protection
   – Power Supply Lock-Down and OTP protection
   – 64-Bit Unique ID for each device
   – 4X256-Bytes Security Registers with OTP locks
   – Volatile & Non-volatile Status Register Bits
● Space Efficient Packaging
   – 8-pin SOIC 150/208-mil
   – 8-pad WSON 6x5-mm, USON 4x3-mm
   – 8-ball WLCSP
   – 16-pin SOIC 300-mil
   – Contact Winbond for KGD and other options

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51 
 

Other manufacturer searches related to Q16DWUUIG

Part NameDescriptionPDFManufacturer
MX25L1602 16M-BIT [16M x 1] CMOS SERIAL FLASH EEPROM MX25L1602 View Macronix International
25Q32BVAAG 3V 32M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI 25Q32BVAAG View Unspecified
25L1605 16M-BIT [x 1 / x 2] CMOS SERIAL FLASH 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH 64M-BIT [x 1 / x 2] CMOS SERIAL FLASH 25L1605 View Macronix International
AT25F512A 512Kbit High Speed SPI Serial Flash Memory 512K (65,536 x 8) AT25F512A View Atmel Corporation
SA25F040 Saifun SA25F Family of SPI Serial Flash Memory Devices SA25F040 View Saifun Semiconductors
EN25S10 1 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector EN25S10 View Eon Silicon Solution Inc.
M58MR016-ZCT 16 Mbit (1Mb x16, Mux I/O, Dual Bank, Burst) 1.8V Supply Flash Memory M58MR016-ZCT View STMicroelectronics
IS25LQ080 8 Mbit Single Operating Voltage Serial Flash Memory With 104 MHz Dual- or 100MHz Quad-Output SPI Bus Interface IS25LQ080 View Integrated Silicon Solution
M25P05-VMN6T 512 Kbit, Low Voltage, Serial Flash Memory With 20 MHz SPI Bus Interface M25P05-VMN6T View STMicroelectronics
AT25DF321 32-megabit 2.7-volt Minimum SPI Serial Flash Memory AT25DF321 View Atmel Corporation

Share Link : 

한국어 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]