datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  
HOME  >>>  TI  >>> DAC081C085CIMM/NOPB PDF

DAC081C085CIMM/NOPB Datasheet PDF - Texas Instruments

Part NameDescriptionManufacturer
DAC081C085CIMM/NOPB 8-Bit Micro Power Digital-to-Analog Converter with an I2C Compatible Interface TI
Texas Instruments TI
DAC081C085CIMM/NOPB Datasheet PDF : DAC081C085CIMM/NOPB pdf   
DAC081C081 image

The DAC081C08x device is an 8-bit, single-channel, voltage-output digital-to-analog converter (DAC) that operates from a 2.7-V to 5.5-V supply. The output amplifier allows rail-to-rail output swing and has an 4.5-µsec settling time. The DAC081C081 uses the supply voltage as the reference to provide the widest dynamic output range and typically consumes 132 µA while operating at 5 V. It is available in 6-lead SOT and WSON packages and provides three address options (pin selectable).
As an alternative, the DAC081C085 provides nine I2C addressing options and uses an external reference. It has the same performance and settling time as the DAC081C081. It is available in an 8-lead VSSOP.
The DAC081C081 and DAC081C085 use a 2-wire, I2C-compatible serial interface that operates in all three speed modes, including high-speed mode (3.4 MHz). An external address selection pin allows up to three DAC081C081 or nine DAC081C085 devices per 2-wire bus. Pin-compatible alternatives to the DAC081C081 are available that provide additional address options.

• Ensured Monotonicity to 8-bits
• Low Power Operation: 156 µA Maximum at 3.3 V
• Extended Power Supply Range (2.7 V to 5.5 V)
• I2C-Compatible 2-Wire Interface Which Supports
   Standard (100-kHz), Fast (400-kHz), and High
   Speed (3.4-MHz) Modes
• Rail-to-Rail Voltage Output
• Very Small Package
• Resolution 8 Bits
• INL ±0.6 LSB (Maximum)
• DNL ±0.1 LSB (Maximum)
• Settling Time 4.5 μs (Maximum)
• Zero Code Error +10 mV (Maximum)
• Full-Scale Error −0.7 %FS (Maximum)
• Supply Power
   – Normal
   – 380 μW (3 V)
   – 730 μW (5 V) Typical
   – Power Down
   – 0.5 μW (3 V)
   – 0.9 μW (5 V) Typical

• Industrial Process Control
• Portable Instruments
• Digital Gain and Offset Adjustments
• Programmable Voltage and Current Sources
• Test Equipment

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41 


Other manufacturer searches related to DAC081C085CIMM/NOPB

Part NameDescriptionPDFManufacturer
DAC081C081 8-Bit Micro Power Digital-to-Analog Converter with an I2C-Compatible Interface DAC081C081 View National ->Texas Instruments
ADC121C021 I2C-Compatible, 12-Bit Analog-to-Digital Converter (ADC) with Alert Function ADC121C021 View National ->Texas Instruments
ADS7830 8-Bit, 8-Channel Sampling ANALOG-TO-DIGITAL CONVERTER with I2C™ Interface ADS7830 View Burr-Brown -> Texas Instruments
MB88141A D/A Converter for Digital Tuning (Compatible with I2C Bus) MB88141A View Fujitsu
DAC813 Microprocessor-Compatible 12-BIT DIGITAL-TO-ANALOG CONVERTER DAC813 View Burr-Brown -> Texas Instruments
MN3395 20-Bit, Deglitched Digital-to-Analog Converter MN3395 View Micro Networks
DAC121S101 12-Bit Micro Power, RRO Digital-to-Analog Converter DAC121S101 View National ->Texas Instruments
ADP1655 Dual LED Flash Driver with I2C-Compatible Interface ADP1655 View Analog Devices
DAC2813 DUAL 12-BIT DIGITAL-TO-ANALOG CONVERTER (12-bit port interface) DAC2813 View Burr-Brown -> Texas Instruments

Share Link : 

한국어 简体中文 日本語 русский español

All Rights Reserved © 2014 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]