datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  
HOME  >>>  TI  >>> 74ALVCH16373ZRDR PDF

74ALVCH16373ZRDR Datasheet PDF - Texas Instruments

Part NameDescriptionManufacturer
74ALVCH16373ZRDR 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS TI
Texas Instruments TI
Other PDF  no available.
74ALVCH16373ZRDR Datasheet PDF : 74ALVCH16373ZRDR pdf   
SN74ALVCH16373 image

DESCRIPTION/ORDERING INFORMATION
This 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V V CC operation.
The SN74ALVCH16373 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the buslines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

FEATURES
• Member of the Texas Instruments Widebus™ Family
• Operates From 1.65 V to 3.6 V
• Max tpd of 3.6 ns at 3.3 V
• ±24-mA Output Drive at 3.3 V
• Bus Hold on Data Inputs Eliminates the Need
   for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
   – 2000-V Human-Body Model (A114-A)
   – 200-V Machine Model (A115-A)

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18 
 

Other manufacturer searches related to 74ALVCH16373ZRDR

Part NameDescriptionPDFManufacturer
PI74ALVCH16373 16-Bit Transparent D-Type Latch with 3-STATE Outputs PI74ALVCH16373 View Pericom Semiconductor
PI74ALVCH16373 16-Bit Transparent D-Type Latch with 3-STATE Outputs PI74ALVCH16373 View Pericom Semiconductor Corporation
PI74ALVTC16373A 16-Bit Transparent D-Type Latch with 3-STATE Outputs PI74ALVTC16373A View Pericom Semiconductor
IDT74LVC16373A 3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O IDT74LVC16373A View Integrated Device Technology
74LVC16373 16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state 74LVC16373 View Philips Electronics
74LVCH16373ADGGRG4 16-Bit Transparent D-Type Latch With 3-State Outputs 74LVCH16373ADGGRG4 View Texas Instruments
74LVC162373A 16-bit D-type transparent latch; 30 Ω series termination resistors; 5 V tolerant inputs/outputs; 3-state 74LVC162373A View Philips Electronics
74LVC162373A 16-bit D-type transparent latch; 30Ω series termination resistors; 5 V tolerant inputs/outputs; 3-state 74LVC162373A View NXP Semiconductors.
74ACT16373MEA 16-Bit Transparent Latch with 3-STATE Outputs 74ACT16373MEA View Fairchild Semiconductor
74ACTQ16373_99 16-Bit Transparent Latch with 3-STATE Outputs 74ACTQ16373_99 View Fairchild Semiconductor

Share Link : 

한국어 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]