datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  ST-Microelectronics  >>> M29F100BB PDF

M29F100BB Datasheet PDF - STMicroelectronics

Part NumberM29F100BB ST-Microelectronics
STMicroelectronics ST-Microelectronics
Description1 Mbit (128Kb x8 or 64Kb x16, Boot Block) Single Supply Flash Memory
Other PDF
M29F100BB Datasheet PDF : M29F100BB pdf   
M29F100BB70M1 image

SUMMARY DESCRIPTION
The M29F100B is a 1 Mbit (128Kb x8 or 64Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M29F100B is fully backward compatible with the M29F100.
The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.

■ SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS
■ ACCESS TIME: 45ns
■ PROGRAMMING TIME
   – 8µs per Byte/Word typical
■ 5 MEMORY BLOCKS
   – 1 Boot Block (Top or Bottom Location)
   – 2 Parameter and 2 Main Blocks
■ PROGRAM/ERASE CONTROLLER
   – Embedded Byte/Word Program algorithm
   – Embedded Multi-Block/Chip Erase algorithm
   – Status Register Polling and Toggle Bits
   – Ready/Busy Output Pin
■ ERASE SUSPEND and RESUME MODES
   – Read and Program another Block during Erase Suspend
■ UNLOCK BYPASS PROGRAM COMMAND
   – Faster Production/Batch Programming
■ TEMPORARY BLOCK UNPROTECTION MODE
■ LOW POWER CONSUMPTION
   – Standby and Automatic Standby
■ 100,000 PROGRAM/ERASE CYCLES per BLOCK
■ 20 YEARS DATA RETENTION
   – Defectivity below 1 ppm/year
■ ELECTRONIC SIGNATURE
   – Manufacturer Code: 0020h
   – Top Device Code M29F100BT: 00D0h
   – Bottom Device Code M29F100BB: 00D1h

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22 
Share Link : ST-Microelectronics

Language : Korean   Chinese   Japanese   Russian   Spanish

@ 2014 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]