datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  
HOME  >>>  Philips  >>> PCA9560 PDF

PCA9560 Datasheet PDF - Philips Electronics

Part NameDescriptionManufacturer
PCA9560 Dual 5-bit multiplexed 1-bit latched I2C EEPROM DIP switch Philips
Philips Electronics Philips
Other PDF  no available.
PCA9560 Datasheet PDF : PCA9560 pdf   
PCA9560 image

DESCRIPTION
The PCA9560 is a 20-pin CMOS device consisting of two 6-bit non-volatile EEPROM registers, 5 hardware pin inputs and a 5-bit multiplexed output with one latched EEPROM bit. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where 3 preset values (2 sets of internal non-volatile registers and 1 set of external hardware pins) set processor voltage for operation in either performance, deep sleep or deeper sleep modes. The PCA9560 is also useful in server and telecom/networking applications when used to replace DIP switches or jumpers, since the settings can be easily changed via I2C/SMBus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off

FEATURES
• 5-bit 3-to-1 multiplexer, 1-bit latch DIP switch
• 5-bit external hardware pins
• Two 6-bit internal non-volatile registers, fully pin-to-pin compatible with PCA9559
• Selection between the two non-volatile registers
• Selection between non-volatile registers and external hardware pins
• I2C/SMBus interface logic
• Internal pull-up resistors on input pin and control signals
• Active high write protect on input controls the ability to write to the non-volatile registers
• 2 address pins, allowing up to 4 devices on the I2C-bus
• 5 open drain multiplexed outputs
• Open drain non-multiplexed output
• Internal 6-bit non-volatile registers programmable and readable via I2C-bus
• External hardware 5-bit value readable via I2C-bus
• Multiplexer selection can be overridden by I2C-bus
• Operating power supply voltage 3.0 V to 3.6 V
• 5 V and 2.5 V tolerant inputs
• 0 to 400 kHz clock frequency
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA.
• Package offering: SO 20, TSSOP 20

Page Links : 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17 
 

Other manufacturer searches related to PCA9560

Part NameDescriptionPDFManufacturer
PCA9560 Dual 5-bit multiplexed 1-bit latched I2C EEPROM DIP switch PCA9560 View NXP Semiconductors.
PCA8550 4-bit multiplexed/1-bit latched 5-bit I2C EEPROM DIP switch PCA8550 View NXP Semiconductors.
PCA8565 4-bit multiplexed/1-bit latched 5-bit I2C EEPROM PCA8565 View NXP Semiconductors.
FM3540CM14 4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches FM3540CM14 View Fairchild Semiconductor
HN58X2408FPIE Two-wire serial interface 8k EEPROM (1-kword × 8-bit)/16k EEPROM (2-kword × 8-bit) 32k EEPROM (4-kword × 8-bit)/64k EEPROM (8-kword × 8-bit) HN58X2408FPIE View Renesas Electronics
HN58X2408FPI Two-wire serial interface 8k EEPROM (1-kword × 8-bit)/16k EEPROM (2-kword × 8-bit) 32k EEPROM (4-kword × 8-bit)/64k EEPROM(8-kword × 8-bit) HN58X2408FPI View Hitachi -> Renesas Electronics
LS7060 32 BIT/DUAL 16 BIT BINARY UP COUNTER WITH BYTE MULTIPLEXED THREE-STATE OUTPUTS LS7060 View LSI Corporation
8S003F3 V alue line, 16 MHz STM8S 8-bit MCU, 8 Kbytes Flash, 128 bytes data EEPROM, 10-bit ADC, 3 timers, UART , SPI, I2C 8S003F3 View STMicroelectronics
CX20017 DUAL 16 BIT, 44Hz, MULTIPLEXED D/A CX20017 View Sony Semiconductor
CX20023 Dual 16 Bit 44kHz Multiplexed D/A CX20023 View Sony Semiconductor

Share Link : 

한국어 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]