datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  
HOME  >>>  Fairchild  >>> 74LVX161284MTDX PDF

74LVX161284MTDX Datasheet PDF - Fairchild Semiconductor

Part NameDescriptionManufacturer
74LVX161284MTDX Low Voltage IEEE 161284 Translating Transceiver Fairchild
Fairchild Semiconductor Fairchild
Other PDF  no available.
74LVX161284MTDX Datasheet PDF : 74LVX161284MTDX pdf   
74LVX161284 image

General Description
The LVX161284 contains eight bidirectional data buffers and eleven control/status buffers to implement a full IEEE 1284 compliant interface. The device supports the IEEE 1284 standard and is intended to be used in an Extended Capabilities Port mode (ECP). The pinout allows for easy connection from the Peripheral (A-side) to the Host (cable side).
Outputs on the cable side can be configured to be either open drain or high drive (r 14 mA) and are connected to a separate power supply pin (VCC-cable) to allow these outputs to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCC-cable supply to provide proper termination and pull-ups for open drain mode.
Outputs on the Peripheral side are standard low-drive CMOS outputs designed to interface with 3V logic. The DIR input controls data flow on the A1–A8/B1–B8 transceiver pins.

Features
■ Supports IEEE 1284 Level 1 and Level 2 signaling
   standards for bidirectional parallel communications
   between personal computers and printing peripherals
■ Translation capability allows outputs on the cable side to
   interface with 5V signals
■ All inputs have hysteresis to provide noise margin
■ B and Y output resistance optimized to drive external cable
■ B and Y outputs in high impedance mode during power down
■ Inputs and outputs on cable side have internal pull-up resistors
■ Flow-through pin configuration allows easy interface
   between the “Peripheral and Host”
■ Replaces the function of two (2) 74ACT1284 devices

Page Links : 1  2  3  4  5  6  7  8  9  10  11 
 

Other manufacturer searches related to 74LVX161284MTDX

Part NameDescriptionPDFManufacturer
74AVC4T245 4-bit dual supply translating transceiver with configurable voltage translation; 3-state 74AVC4T245 View NXP Semiconductors.
MC13193 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard MC13193 View Freescale Semiconductor
MC13192 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard MC13192 View Freescale Semiconductor
74AVCH4T245 4-bit dual supply translating transceiver with configurable voltage translation; 3-state 74AVCH4T245 View NXP Semiconductors.
MC74LVX4245DW Dual Supply Octal Translating Transceiver MC74LVX4245DW View ON Semiconductor
MC74LVX4245 Dual Supply Octal Translating Transceiver MC74LVX4245 View ON Semiconductor
PCA9574 8-bit I2C-bus and SMBus, level translating, low voltage GPIO with reset and interrupt PCA9574 View NXP Semiconductors.
MC74LVX4245 Dual Supply Octal Translating Transceiver with 3−State Outputs MC74LVX4245 View Motorola => Freescale
PCA9575 16-bit I2C-bus and SMBus, level translating, low voltage GPIO with reset and interrupt PCA9575 View NXP Semiconductors.
74LVC4245A Octal dual supply translating transceiver; 3-state 74LVC4245A View Philips Electronics

Share Link : 

한국어 简体中文 日本語 русский español


All Rights Reserved © datasheetbank.com 2014 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]