datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : C8855 Hamamatsu
Hamamatsu Photonics
Description : USB INTERFACE COMPATIBLE COUNTING UNIT View

OVER VIEW
The C8855 is a COUNTING UNIT with a USB INTERFACE and can be used as a photon counter when combined with a photon COUNTING head, etc.
The counter of the C8855 has two counter circuits (double counter method) capable of COUNTING input signals with no dead time. The USB INTERFACE easily connects to a notebook PC allowing measurement in an even wider application field. When used with a photon COUNTING head, the C8855 supplies power (+5 V / 200 mA) necessary to operate the photon COUNTING head. Since the C8855 is hot-swap COMPATIBLE (plug and play COMPATIBLE), it helps you set up measurement environment quickly. You can start measurement on the day the C8855 is delivered by using the sample software that supplied with the C8855.

FEATURES
COMPATIBLE with USB INTERFACE (Ver. 1.1)
COMPATIBLE with Windows® 98/98SE/2000/Me
● Sample software supplied as standard item
● Accurate measurement with no dead time (double counter method)
● Supplies power to operate photon COUNTING head (power supply capacity: +5 V / 200 mA)

Part Name(s) : L8784 M8784 Hamamatsu
Hamamatsu Photonics
Description : PCI BUS COMPATIBLE COUNTING BOARD View

OVER VIEW
The M8784 COUNTING board is a PCI bus add-in board type counter. The M8784 functions as a photon counter when combined with a photon COUNTING head, etc.
The counter of the M8784 includes two COUNTING circuits (double counter method) capable of COUNTING input signals with no dead time. The internal memory allows pulse COUNTING over extended periods with a high time resolution (10 µs).
A maximum of two M8784 boards can be simultaneously controlled from a PC, making it possible to perform simultaneous dualchannel measurements.

FEATURES
● Internal memory (double memory methode)
● PCI bus COMPATIBLE
● Windows®98/98SE/2000/Me COMPATIBLE
● Sample software supplied as standard item
● Measurements with no dead time (double counter method)
● Simultaneous 2-channel measurement (when 2 boards are used)

Part Name(s) : DS_USB_RS485_CABLES USB-RS485 USB-RS485-CC-LLLL-CU-X USB-RS485-WE USB-RS485-WE-1800-BT ETC2
Unspecified
Description : USB to RS485 Serial Converter Cable View

[FTDI Chip]

Description
The USB-RS485 cable is a USB to RS485 levels serial UART converter cable incorporating FTDI‟s FT232RQ USB to serial UART INTERFACE IC device which handles all the USB signalling and protocols. The cable provides a fast, simple way to connect devices with a RS485 INTERFACE to USB.

Features
USB-RS485 converter cable provides a USB to RS485 serial INTERFACE with customised end connectors.
Entire USB protocol handled by the electronics in the cable.
EIA/TIA-485 communication INTERFACE with low power requirements.
UART INTERFACE support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Internal EEPROM with user writeable area.
FTDI‟s royalty-free VCP allow for communication as a standard emulated COM port and D2XX „direct‟ drivers provide DLL application programming INTERFACE.
Visual indication of Tx and Rx traffic via LEDs in the transparent USB connector.
X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Mbaud.
Support for FT232R FTDIChip-ID™ feature for improved security.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller COMPATIBLE.
USB 2.0 Full Speed COMPATIBLE.
-40°C to +85°C operating temperature range.
Cable length is 1.80m (6 feet).
ESD Protection for RS-485 I/O's
  ±15kV Human Body Model (HBM)
  ±15kV EN61000-4-2 Air Gap Discharge
  ±8kV EN61000-4-2 Contact Discharge
FCC and CE compliant.
Custom versions available on request (subject to MOQ).
RoHS Compliant

Typical Applications
USB to serial RS485 level converter.
Upgrading legacy peripherals to USB.
INTERFACE Microcontroller UART or I/O to USB.
INTERFACE FPGA or PLD to USB.
USB Instrumentation PC INTERFACE.
USB industrial control.
USB password protected file transfers.

Part Name(s) : C3866 C6465 Hamamatsu
Hamamatsu Photonics
Description : C3866, C6465 / PHOTON COUNTING UNITS View

Photon COUNTING UNITs are designed to convert single photoelectron pulses from a photomultiplier tube into 5 V digital signals by use of the built-in amplifier and discriminator circuits. Photon COUNTING with a high S/N ratio can be performed by simply connecting a counter to the output of the photon COUNTING UNIT.


Part Name(s) : PCM2903B PCM2903BDB PCM2903BDBR TI
Texas Instruments
Description : STEREO AUDIO CODEC WITH USB INTERFACE, SINGLE-ENDED ANALOG INPUT/OUTPUT, AND S/PDIF View

DESCRIPTION
The PCM2903B is Texas Instruments' single-chip, USB, stereo audio codec with a USB-compliant full-speed protocol controller and S/PDIF. The USB protocol controller requires no software code, but the USB descriptors can be modified in some areas (for example, vendor ID and/or product ID). The PCM2903B employs SpAct™ architecture, TI's unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enable playback and record with low clock jitter as well as independent playback and record sampling rates.

APPLICATIONS
USB Audio Speaker
USB Headset
USB Monitor
USB Audio INTERFACE Box

Part Name(s) : KCUSB3 ETC1
Unspecified
Description : USB Controller ? Quick INTERFACE View

[KAWASAKI]

General Description
The Kawasaki KCUSB3 Controller is a quick single chip solution to INTERFACE peripheral devices to the Universal Serial Bus (USB). The KCUSB3 has been specifically designed to provide a simple and fast method of designing INTERFACEs for peripheral devices to the USB port. This has been accomplished by its highly integrated functionality and flexible General Purpose I/O (GPIO) that can be configured to your system requirements. This device has been configured with a wide range of capabilities for your immediate use or evaluation. The device can then be reconfigured for your specific application. You can directly access the embedded processor’s address and data lines to use external programmable logic for evaluation before configuring the GPIO for your final device. The SIE (Serial INTERFACE Engine) is fully COMPATIBLE with the USB specification.

Features
• Advanced 16 Bit processor for USB transaction processing and control data processing
USB INTERFACE ver 1.0/1.1 compliant
• Transceivers and SIE (Serial INTERFACE Engine)
• Internal Clock Generation
• Utilizes low cost external crystal circuitry
• 1.5K x 16 Internal RAM buffer
• 2 IRQ
• 8 Channel, 10 Bit A/D
• External Memory INTERFACE for direct access to the 16-bit processor for using external logic or memory.
• General purpose I/O
• Watchdog timer
• PWM Output Support
• 8K user programmable gates
• 8K bytes ROM
• I2C INTERFACE
• 100 pin QFP package

Part Name(s) : KL5KUSB2CF K-micro
KAWASAKI MICROELECTRONICS
Description : USB 2.0 Controller ? Quick INTERFACE View

General Description
The Kawasaki KL5KUSB2CF Controller is a quick single chip solution to INTERFACE peripheral devices to the Universal Serial Bus (USB) 2.0 specification. The KL5KUSB2CF has been specifically designed to provide a simple and fast method of designing INTERFACEs for peripheral devices to the USB port. This has been accomplished by its highly integrated functionality and flexible General Purpose I/O (GPIO) that can be configured to your system requirements. This device has been configured with a wide range of capabilities for your immediate use or evaluation. The device can then be reconfigured for your specific application. You can directly access the embedded processor’s address and data lines to use external programmable logic for evaluation before configuring the GPIO for your final device. The SIE (Serial INTERFACE Engine) is fully COMPATIBLE with the USB specification.

Features
• Advanced 16 Bit processor for USB transaction processing and control data processing
USB INTERFACE ver 2.0 compliant
• Transceivers and SIE (Serial INTERFACE Engine)
• Internal Clock Generation
• Utilizes low cost external crystal circuitry
• 1.5K x 16 Internal RAM buffer
• 2 IRQ
• 8 Channel, 10 Bit A/D
• External Memory INTERFACE for direct access to the 16-bit processor for using external logic or memory.
• User configurable gates
• Watchdog timer
• 8K user programmable gates
• 8K bytes ROM
• I2C INTERFACE
• 100 pin QFP package

Part Name(s) : MLX16303 MLX16303E Melexis
Melexis Microelectronic Systems
Description : Bi-directional Remote Sensor UNIT INTERFACE View

Description
This INTERFACE IC is designed for remote automotive sensors, especially between a main ECU and remote (sensor) UNITs. It contains two identical INTERFACEs and the main task of each INTERFACE is to supply one remote UNIT and to receive digital information from the same remote UNIT. It is also possible to send data as PWM voltage pulses to the remote UNIT, for example to program the remote UNIT for its special application. This is done by one active wire: the INTERFACE supplies the external UNIT with a pre-regulated voltage, the external UNIT transmits the digital information back to the INTERFACE by current modulation. A continuous diagnosis of the IC is running in the background. The diagnosis results can be requested by a microcontroller using the SPI INTERFACE.

Features and Benefits
■ Two identical INTERFACE channels for remote sensor UNITs
■ Two connection modes: connection to OUTx and RETx or connection to OUTx and GND pin
■ 16 bit Standard SPI for control and diagnosis via a microcontroller
■ Supply voltage for each remote UNIT with a supply current up to 45mA
■ Current limitation with an analog feed back loop for each channel
■ Receive data from the remote UNIT by current modulation with a transmission rate of 10kHz
■ Transmission of data to the remote UNIT via PWM voltage pulses
■ Data input/output can be directly connected to a microcontroller input/output (CMOS)
■ Low current consumption
■ All pins to the external INTERFACE are short-circuit and high-voltage protected
■ High immUNITy against cross coupling between the two channels
■ The current modulation provides high noise immUNITy for data transfer

Application
■ Remote automotive sensors (between ECU and sensors).

 

Part Name(s) : SAA8117HL Philips
Philips Electronics
Description : Digital camera USB INTERFACE IC View

GENERAL DESCRIPTION
The SAA8117HL is a monolithic integrated circuit which can be used in PC video cameras to convert D1 video signals and analog audio signals to properly formatted USB packets.

FEATURES
• Medium resolution CCD sensors (PAL non-interlaced mode) or VGA CCD sensors (progressive mode)
• D1 digital video input (8 bits YUV 4 : 2 : 2, time multiplexed)
• Internal Pulse Pattern Generator (PPG) dedicated for medium resolution Sharp or COMPATIBLE sensors and VGA sensors and for frame rate selection
• Video formatter (programmable CIF formatter and compression engine) controlled via SNERT (UART) INTERFACE
• Selectable output frame rate (1 fps in VGA, up to 15 fps in CIF format)
• Video packetizer FIFO
• I2C-bus INTERFACE for communication between the USB protocol hardware and the external microcontroller
• Integrated analog bus driver (ATX)
• Microphone/audio input to USB (FGA, ADC, PLL and decimator filter)
• Integrated analog bus driver (ATX)
• Integrated main oscillator
• Miscellaneous functions e.g. power management, PLL backup oscillator.

APPLICATIONS
• Low-cost desktop video applications with USB INTERFACE.

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]