datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : CT-23 CT-26 CT-23-6A CT-23-6M CT-26-6A CT-26-6M CT-23-6A CT-23-6M CT-26-6A CT-26-6M CT-23 CT-26 Bourns
Bourns, Inc
Description : TURNS-COUNTING DIAL View

Features
■ 27 mm and 28 mm diameter
■ 10 turns
■ No backlash - mounted directly to potentiometer shaft
■ For use with precision potentiometers or other rotating devices up to 10 turns
■ High force, positive brake

Part Name(s) : M-959 Clare
Clare Inc => IXYS
Description : DIAL Pulse Counter and Hook Status Monitor View

Description
The M-959 is a low-power DIAL pulse counter and hook status monitor. Contained in a 14-pin package, the M-959 requires no external components except a single 3.579 MHz television color burst crystal.

Features
• Time-guarded DIAL pulse counting
• 10 or 20 PPS DIALing speeds pin selectable
• Tri-state data outputs
• Valid data output strobe
• Data strobe control for use in interrupt-driven
   environments
• Independent hook status monitoring
• Low-power CMOS construction

Part Name(s) : L8784 M8784 Hamamatsu
Hamamatsu Photonics
Description : PCI BUS COMPATIBLE COUNTING BOARD View

OVER VIEW
The M8784 counting board is a PCI bus add-in board type counter. The M8784 functions as a photon counter when combined with a photon counting head, etc.
The counter of the M8784 includes two counting circuits (double counter method) capable of counting input signals with no dead time. The internal memory allows pulse counting over extended periods with a high time resolution (10 µs).
A maximum of two M8784 boards can be simultaneously controlled from a PC, making it possible to perform simultaneous dualchannel measurements.

FEATURES
● Internal memory (double memory methode)
● PCI bus compatible
● Windows®98/98SE/2000/Me compatible
● Sample software supplied as standard item
● Measurements with no dead time (double counter method)
● Simultaneous 2-channel measurement (when 2 boards are used)

Part Name(s) : C8855 Hamamatsu
Hamamatsu Photonics
Description : USB INTERFACE COMPATIBLE COUNTING UNIT View

OVER VIEW
The C8855 is a counting unit with a USB interface and can be used as a photon counter when combined with a photon counting head, etc.
The counter of the C8855 has two counter circuits (double counter method) capable of counting input signals with no dead time. The USB interface easily connects to a notebook PC allowing measurement in an even wider application field. When used with a photon counting head, the C8855 supplies power (+5 V / 200 mA) necessary to operate the photon counting head. Since the C8855 is hot-swap compatible (plug and play compatible), it helps you set up measurement environment quickly. You can start measurement on the day the C8855 is delivered by using the sample software that supplied with the C8855.

FEATURES
● Compatible with USB interface (Ver. 1.1)
● Compatible with Windows® 98/98SE/2000/Me
● Sample software supplied as standard item
● Accurate measurement with no dead time (double counter method)
● Supplies power to operate photon counting head (power supply capacity: +5 V / 200 mA)


Part Name(s) : MP1342 MP1343 MP1352 MP1353 MP1362 MP1363 MP1372 MP1373 MP1382 MP1383 MP1942 MP1943 MP1952 MP1953 MP1962 MP1963 MP1972 MP1973 MP1982 MP1983 MP953 MP963 MP972 MP973 MP982 PerkinElmer
PerkinElmer Inc
Description : MP Series Photon Counting Modules Ultra High Sensitivity Gateable Photon Counting Module View

Description
The Photon Counting Head MP900 series is designed for applications in all fields of single photon detection, e.g. chemoluminescence, bioluminescence, flourescence, in-vitro ssay,environmental
measurements or pure research. It is an easy to use module, containing the Channel Photomultiplier, a high voltage power supply, a discrimination amplifier and a pulse shaper for fast
output pulses. An installed active quenching system avoids over illumination to the detector.
It is also possible to apply an external gate function for time correlated photon counting. Strong variations in light levels are possible due to the high dynamic range of the installed CPM. The
exceptional low noise and high sensitivity facilitates detection of extremely low light levels.

Features
· High dynamic range
· No cooling required
· Very high stability in noise level
· Active quenching circuit for high light protection
· Gateable CPM input
· Optical fiber read-out possible
· 5 volts operating voltage
· Monitor voltage output

Part Name(s) : H7155 H7155-20 Hamamatsu
Hamamatsu Photonics
Description : Photon Counting Head H7155 Series View

The H7155 series are compact photon counting head devices consisting of a metal package photomultiplier tube along with a high-speed photon counting circuit and a high-voltage power supply circuit. The high voltage supply for photomultiplier tube and the discriminator level are preset to optimum values, allowing photon counting measurement by just connecting a +5 V supply. The H7155-20 has an internal prescaler of division by 4. This prescaler improves the count linearity 4-fold compared to the H7155.

Part Name(s) : H7360 H7360-01 H7360-02 H7360-03 Hamamatsu
Hamamatsu Photonics
Description : Head-on PMT Photon Counting Head View

The H7360 series is a wide sensitive area photon counting head device containing a 25-mm (1") head-on photomultiplier tube, high-voltage power supply circuit and photon counting circuit. Since those circuits are designed for wide band, the H7360 series can operate at a high count rate. The high voltage supply for photomultiplier tube and the discriminator level are preset to optimum values so that photon counting can be performed just by connecting a +5 V supply and a pulse counter.
The H7360-01 is of low noise, the H7360-02 has enhanced detection efficiency in the visible range, and the H7360-03 covers sensitivity from the visible to near infrared.
A mount flange (E6264) is provided as an option for easy installation to measurement equipment.

 

Part Name(s) : 407001 SC600 407001-USB EXTECH
Extech Instruments Corporation.
Description : Electronic Counting Scale/Balance View

Professional electronic counting and weighing scale with load cell transducer for high accuracy and performance. Wide capacity measuring single small electronic component weighing 0.005oz (0.1g) or batches up to 21.164oz (600g). Optional software available for generating reports and documentation of inventory components.

Features
•  Wide measuring capacity up to 600g (21.164oz)
•  Gram or Ounce measurement selectable by internal slide switch
•  ±0.05% accuracy with 0.01g and 0.0005oz resolution
•  LCD display with 0.8" (20.9mm) easy-to-read digits
•  Built-in self-calibration system using traceable weights
•  High precision counting function with preset counting sampling number selection of 10pcs, 20pcs, 50pcs, or 100pcs
•  TARE function to set the scale to zero
•  Built-in bubble level with adjustable rubber pads
•  RS-232 interface (optional 407001 software with cable)
•  Dimensions:
    Base: 9.8 x 7.5 x 2.8" (250 x 190 x 70mm)
    Platform Diameter: 4.7" (120mm)
•  Weight: 2.2lbs (1kg)
•  Complete with 6 AA batteries, metal platform, and Universal AC adaptor with multi-plugs

Part Name(s) : C2741-32A C2741-35A Hamamatsu
Hamamatsu Photonics
Description : PHOTON COUNTING I-CCD VIDEO CAMERA View

PHOTON COUNTING I-CCD VIDEO CAMERA

The C2741-32A, -35A cameras are designed specifically for imaging at ultra-low light levels. Each camera consists
of an image intensifier including a 1 stage MCP and CCD camera coupled with a relay lens.
Single photon counting is possible due to superior per formance as compared to conventional ICCD Cameras,
for example:

1. Higher gain ................ about 10 times higher
2. Lower dark noise ....... about 1/10 lower : using bialkali photocathode

FEATURES
•High spatial resolution
  (Typical horizontal center resolution)
  450 TV lines (C2741-32A)
  370 TV lines (C2741-35A)
•Low geometric distortion
  Max 2% within inscribed circle
•High sensitivity
  Single photon counting is possible
•Wide effective scanning area
  approx. 19.0 mm (H)×14.2 mm (V) (C2741-32A)
  approx. 12.7 mm (H)×9.5 mm (V) (C2741-35A)

APPLICATIONS
The cameras can be used for luminescence and fluores cence applications in a macroscopic or microscopic imaging system set up.
• Gene expression experiments
• Colony screening
• Detection of gels and blots
• Enzyme lmmunoassay
• Phagocytosis
• DNA hybridization

1

2

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]