datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TISP7070H3SL TISP7080H3SL TISP7095H3SL TISP7125H3SL TISP7135H3SL TISP7145H3SL TISP7180H3SL TISP7210H3SL TISP7250H3SL TISP7290H3SL TISP7350H3SL TISP7400H3SL Power-Innovations
Power Innovations
Description : TRIPLE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
The TISP7xxxH3SL limits OVERVOLTAGEs between the telephone line Ring and Tip conductors and Ground.
OVERVOLTAGEs are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line.
Each terminal pair, T-G, R-G and T-R, has a symmetrical voltage-triggered BIDIRECTIONAL THYRISTOR protection characteristic. OVERVOLTAGEs are initially clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on state. This low-voltage on state causes the current resulting from the OVERVOLTAGE to be safely diverted through the device. The high crowbar holding current prevents d.c. latchup as the diverted current subsides.
This TISP7xxxH3SL range consists of twelve voltage variants to meet various maximum system voltage levels (58 V to 300 V). They are guaranteed to voltage limit and withstand the listed international lightning surges in both polarities. These high current protection devices are in a 3-pin single-in-line (SL) plastic package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in SL packaged PROTECTORS, consult the factory. For lower rated impulse currents in the SL package, the 45 A 10/1000 TISP7xxxF3SL series is available.
These monolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and matched breakover control and are virtually transparent to the system in normal operation

● Ion-Implanted Breakdown Region
   - Precise DC and Dynamic Voltages
● Rated for International Surge Wave Shapes
   - Single and Simultaneous Impulses
● 3-Pin Through-Hole Packaging
   - Compatible with TO-220AB pin-out
   - Low Height. . . . . . . . . . . . . . . . . . . . .8.3 mm

View
Part Name(s) : TISP4070H3LM TISP4080H3LM TISP4095H3LM TISP4125H3LM TISP4145H3LM TISP4165H3LM TISP4180H3LM TISP4220H3LM TISP4240H3LM TISP4260H3LM TISP4300H3LM TISP4350H3LM TISP4400H3LM Power-Innovations
Power Innovations
Description : BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

TELECOMMUNICATION SYSTEM HIGH CURRENT OVERVOLTAGE PROTECTORS

● 8 kV 10/700, 200 A 5/310 ITU-T K20/21 rating
● Ion-Implanted Breakdown Region
   Precise and Stable Voltage
  Low Voltage Overshoot under Surge

View
Part Name(s) : TISP4070H3BJ TISP4080H3BJ TISP4095H3BJ TISP4125H3BJ TISP4145H3BJ TISP4165H3BJ TISP4180H3BJ TISP4200H3BJ TISP4240H3BJ TISP4265H3BJ TISP4300H3BJ TISP4350H3BJ TISP4400H3BJ Power-Innovations
Power Innovations
Description : BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

TELECOMMUNICATION SYSTEM 100 A 10/1000 OVERVOLTAGE PROTECTORS

● 8 kV 10/700, 200 A 5/310 ITU-T K20/21 rating
● Ion-Implanted Breakdown Region
   Precise and Stable Voltage
   Low Voltage Overshoot under Surge

View
Part Name(s) : TISP4070L3 TISP4350L3 TISP4350L3BJ TISP4070L3BJ TISP4070L3BJR TISP4350L3BJR Power-Innovations
Power Innovations
Description : BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
These devices are designed to limit OVERVOLTAGEs on the telephone line. OVERVOLTAGEs are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line. A single device provides 2-point protection and is typically used for the protection of 2-wire telecommunication equipment (e.g. between the Ring and Tip wires for telephones and modems). Combinations of devices can be used for multi-point protection (e.g. 3-point protection between Ring, Tip and Ground).

FCC PART 68 AND UL 1950 OVERVOLTAGE PROTECTORS

● MODEM Protection against:
   — FCC Part 68 Type A & B surge
   — UL 1950, Clause 6. power cross
   — CSA 22.2 No. 950, Clause 6. power cross
● Ring-Tip Protection ...............TISP4350L3BJ
● Electronics Protection ..........TISP4070L3BJ
● Ion-Implanted Breakdown Region
   Precise and Stable Voltage
   Low Voltage Overshoot under Surge
● Rated for UL 1950 and Part 68 Wave Shapes

View
Part Name(s) : TISP3070H3SL TISP3080H3SL TISP3095H3SL TISP3125H3SL TISP3135H3SL TISP3145H3SL TISP3180H3SL TISP3210H3SL TISP3250H3SL TISP3290H3SL TISP3350H3SL POINN
Power Innovations Ltd
Description : DUAL BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
The TISP3xxxH3SL limits OVERVOLTAGEs between the telephone line Ring and Tip conductors and Ground.
OVERVOLTAGEs are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line.

TELECOMMUNICATION SYSTEM 2x100 A 10/1000 OVERVOLTAGE PROTECTORS

● Ion-Implanted Breakdown Region
   - Precise DC and Dynamic Voltages
● Rated for International Surge Wave Shapes
   - Guaranteed -40 °C to +85 °C Performance
● 3-Pin Through-Hole Packaging
   - Compatible with TO-220AB pin-out
   - Low Height. . . . . . . . . . . . . . . . . . . . .8.3 mm
● Low Differential Capacitance
   - Value at -2 V/-50 V Bias. . . . . . . .67 pF max.

View
Part Name(s) : TISP3070H3SL TISP3080H3SL TISP3095H3SL TISP3125H3SL TISP3135H3SL TISP3145H3SL TISP3180H3SL TISP3210H3SL TISP3250H3SL TISP3290H3SL TISP3350H3SL Power-Innovations
Power Innovations
Description : DUAL BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
The TISP3xxxH3SL limits OVERVOLTAGEs between the telephone line Ring and Tip conductors and Ground.
OVERVOLTAGEs are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line.

TELECOMMUNICATION SYSTEM 2x100 A 10/1000 OVERVOLTAGE PROTECTORS

● Ion-Implanted Breakdown Region
   - Precise DC and Dynamic Voltages
● Rated for International Surge Wave Shapes
   - Guaranteed -40 °C to +85 °C Performance
● 3-Pin Through-Hole Packaging
   - Compatible with TO-220AB pin-out
   - Low Height. . . . . . . . . . . . . . . . . . . . .8.3 mm
● Low Differential Capacitance
   - Value at -2 V/-50 V Bias. . . . . . . .67 pF max.

View
Part Name(s) : TISP4165H4BJ TISP4180H4BJ TISP4200H4BJ TISP4265H4BJ TISP4300H4BJ TISP4360H3BJ TISP4360H4BJ TISP4165H4BJR TISP4180H4BJR TISP4200H4BJR TISP4265H4BJR TISP4300H4BJR TISP4360H3BJR TISP4360H4BJR Power-Innovations
Power Innovations
Description : BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
These devices are designed to limit OVERVOLTAGEs on the telephone line. OVERVOLTAGEs are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line. A single device provides 2-point protection and is typically used for the protection of 2-wire telecommunication equipment (e.g. between the Ring and Tip wires for telephones and modems). Combinations of devices can be used for multi-point protection (e.g. 3-point protection between Ring, Tip and Ground).

HIGH HOLDING CURRENT 100 A 10/1000 OVERVOLTAGE PROTECTORS

● 8 kV 10/700, 200 A 5/310 ITU-T K20/21 rating
● High Holding Current . . . . . . . . . 225 mA min.
● Ion-Implanted Breakdown Region
    Precise and Stable Voltage
    Low Voltage Overshoot under Surge
● Rated for International Surge Wave Shapes
● Low Differential Capacitance . . . 39 pF max.

View
Part Name(s) : TISP7125F3 TISP7125F3D TISP7125F3DR TISP7125F3P TISP7125F3SL TISP7150F3 TISP7150F3D TISP7150F3DR TISP7150F3P TISP7150F3SL TISP7180F3 TISP7180F3D TISP7180F3DR TISP7180F3P TISP7180F3SL TISP7240F3 TISP7240F3D TISP7240F3DR TISP7240F3P TISP7240F3SL TISP7260F3 TISP7260F3D TISP7260F3DR TISP7260F3P TISP7260F3SL POINN
Power Innovations Ltd
Description : TRIPLE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
The TISP7xxxF3 series are 3-point OVERVOLTAGE PROTECTORS designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting values and surge current capability. This terminal pair surge capability ensures that the protector can meet the simultaneous longitudinal surge requirement which is typically twice the metallic surge requirement.

● Patented Ion-Implanted Breakdown Region
   – Precise DC and Dynamic Voltages
● Planar Passivated Junctions
   – Low Off-State Current....................< 10 µA
● Rated for International Surge Wave Shapes
   – Single and Simultaneous Impulses
 

View
Part Name(s) : TISP7125F3 TISP7125F3D TISP7125F3DR TISP7125F3P TISP7125F3SL TISP7150F3 TISP7150F3D TISP7150F3DR TISP7150F3P TISP7150F3SL TISP7180F3 TISP7180F3D TISP7180F3DR TISP7180F3P TISP7180F3SL TISP7240F3 TISP7240F3D TISP7240F3DR TISP7240F3P TISP7240F3SL TISP7260F3 TISP7260F3D TISP7260F3DR TISP7260F3P TISP7260F3SL Power-Innovations
Power Innovations
Description : TRIPLE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
The TISP7xxxF3 series are 3-point OVERVOLTAGE PROTECTORS designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting values and surge current capability. This terminal pair surge capability ensures that the protector can meet the simultaneous longitudinal surge requirement which is typically twice the metallic surge requirement.

● Patented Ion-Implanted Breakdown Region
   – Precise DC and Dynamic Voltages
● Planar Passivated Junctions
   – Low Off-State Current....................< 10 µA
● Rated for International Surge Wave Shapes
   – Single and Simultaneous Impulses
 

View
Part Name(s) : TISP4070H3BJ TISP4070H3BJR TISP4080H3BJ TISP4080H3BJR TISP4095H3BJ TISP4095H3BJR TISP4125H3BJ TISP4125H3BJR TISP4145H3BJ TISP4145H3BJR TISP4165H3BJ TISP4165H3BJR TISP4180H3BJ TISP4180H3BJR TISP4200H3BJ TISP4200H3BJR TISP4240H3BJ TISP4240H3BJR TISP4265H3BJ TISP4265H3BJR TISP4300H3BJ TISP4300H3BJR TISP4350H3BJ TISP4350H3BJR TISP4400H3BJ POINN
Power Innovations Ltd
Description : BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

description
These devices are designed to limit OVERVOLTAGEs on the telephone line. OVERVOLTAGEs are normally caused by
a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line. A
single device provides 2-point protection and is typically used for the protection of 2-wire telecommunication
equipment (e.g. between the Ring and Tip wires for telephones and modems). Combinations of devices can
be used for multi-point protection (e.g. 3-point protection between Ring, Tip and Ground).

TELECOMMUNICATION SYSTEM 100 A 10/1000 OVERVOLTAGE PROTECTORS
● 8 kV 10/700, 200 A 5/310 ITU-T K20/21 rating
● Ion-Implanted Breakdown Region
    Precise and Stable Voltage
    Low Voltage Overshoot under Surge
● Rated for International Surge Wave Shapes
● Low Differential Capacitance . . . 67 pF max.
● UL Recognized, E132482

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]