datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : CD4051BC CD4051BCM CD4053 CD4051BCMTC CD4051BCMTCX CD4051BCMX CD4051BCN CD4051BCNX CD4051BCSJ CD4051BCSJX CD4052BC CD4052BCM CD4052BCMX CD4052BCN CD4052BCNX CD4052BCSJ CD4052BCSJX CD4053BC CD4053BCM CD4053BCMX CD4053BCN CD4053BCNX CD4053BCSJ CD4053BCSJX Fairchild
Fairchild Semiconductor
Description : Single 8-Channel ANALOG MULTIPLEXER/DEMULTIPLEXER,Dual 4-Channel ANALOG MULTIPLEXER/DEMULTIPLEXER,TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

General Description
The CD4051BC, CD4052BC, and CD4053BC ANALOG multiplexers/demultiplexers are digitally controlled ANALOG switches having low “ON” impedance and very low “OFF” leakage currents. Control of ANALOG signals up to 15V p-p can be achieved by digital signal amplitudes of 3−15V. For example, if VDD =5V, VSS =0V and VEE = −5V, ANALOG signals from −5V to +5V can be controlled by digital inputs of 0−5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD−VSS and VDD−VEE supply voltage ranges, independent of the logic state of the control signals. When a logical “1” is present at the inhibit input terminal all channels are “OFF”.

Features
■ Wide range of digital and ANALOG signal levels:
   digital 3 – 15V, ANALOG to 15Vp-p
■ Low “ON” resistance: 80Ω(typ.) over entire 15Vp-p
   signal-input range for VDD −VEE =15V
■ High “OFF” resistance:
   channel leakage of ±10 pA (typ.) at VDD −VEE =10V
■ Logic level conversion for digital addressing signals of
   3 – 15V (VDD −VSS =3 – 15V) to switch ANALOG signa
   to 15 Vp-p(VDD −VEE =15V)
■ Matched switch characteristics:
   ∆RON =5Ω(typ.) for VDD −VEE =15V
■ Very low quiescent power dissipation under all
   digital-control input and supply conditions:
   1 µW (typ.) at VDD −VSS =VDD −VEE =10V
■ Binary address decoding on chip

View
Part Name(s) : HD14051B Hitachi
Hitachi -> Renesas Electronics
Description : 8-channel ANALOG MULTIPLEXER/DEMULTIPLEXER

8-channel ANALOG MULTIPLEXER/DEMULTIPLEXER

View
Part Name(s) : CD4052BCCW CD4052BCW CD4051BCCW CD4053BCCW CD4051BCW CD4053BCW Fairchild
Fairchild Semiconductor
Description : Single 8-Channel ANALOG MULTIPLEXER/DEMULTIPLEXER • Dual 4-Channel ANALOG MULTIPLEXER/DEMULTIPLEXERTRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

General Description
The CD4051BC, CD4052BC, and CD4053BC ANALOG multiplexers/demultiplexers are digitally controlled ANALOG switches having low “ON” impedance and very low “OFF” leakage currents.
   
Features
■ Wide range of digital and ANALOG signal levels:
    digital 3 – 15V, ANALOG to 15Vp-p
■ Low “ON” resistance: 80Ω (typ.) over entire 15Vp-p
    signal-input range for VDD − VEE = 15V
■ High “OFF” resistance:
    channel leakage of ±10 pA (typ.) at VDD − VEE = 10V
■ Logic level conversion for digital addressing signals of
    3 – 15V (VDD − VSS = 3 – 15V) to switch ANALOG signals
    to 15 V
    p-p (VDD − VEE = 15V)
■ Matched switch characteristics:
    ∆RON = 5Ω (typ.) for VDD − VEE = 15V
■ Very low quiescent power dissipation under all
    digital-control input and supply conditions:
    1 µ W (typ.) at VDD − VSS = VDD − VEE = 10V
■ Binary address decoding on chip
   

View
Part Name(s) : 74HC4053 74HCT4053 74HC4053N 74HCT4053N 74HC4053D 74HCT4053D 74HC4053DB 74HCT4053DB 74HC4053PW 74HCT4053PW 74HC4053BQ 74HCT4053BQ NXP
NXP Semiconductors.
Description : TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

General description
The 74HC4053; 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A.
The 74HC4053; 74HCT4053 is TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER with a common enable input (E). Each MULTIPLEXER/DEMULTIPLEXER has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (Sn). With E LOW, one of the two switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4053 and 4.5 V to 5.5 V for 74HCT4053. The ANALOG inputs/outputs (nY0 to nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC  VEE may not exceed 10.0 V.
For operation as a digital MULTIPLEXER/DEMULTIPLEXER, VEE is connected to GND (typically ground).

Features and benefits
■ Wide ANALOG input voltage range from 5 V to +5 V
■ Low ON resistance:
♦ 80 Ω (typical) at VCC - VEE = 4.5 V
♦ 70 Ω (typical) at VCC - VEE = 6.0 V
♦ 60 Ω (typical) at VCC - VEE = 9.0 V
■ Logic level translation: to enable 5 V logic to communicate with ±5 V ANALOG signals
■ Typical ‘break before make’ built-in
■ ESD protection:
♦ HBM JESD22-A114F exceeds 2000 V
♦ MM JESD22-A115-A exceeds 200 V
♦ CDM JESD22-C101E exceeds 1000 V
■ Multiple package options
■ Specified from 40°C to +85°C and 40°C to +125°C

Applications
ANALOG multiplexing and demultiplexing
■ Digital multiplexing and demultiplexing
■ Signal gating

 

View
Part Name(s) : M74HC4053 M74HC4053B1R M74HC4053M1R M74HC4053RM13TR M74HC4053TTR ST-Microelectronics
STMicroelectronics
Description : TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

DESCRIPTION
The M74HC4053 is a TRIPLE two-channel ANALOG MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series. It contains 6 bidirectional and digitally controlled ANALOG switches.

■ LOW POWER DISSIPATION:
  ICC = 4µA(MAX.) at TA=25°C
■ LOGIC LEVEL TRANSLATION TO ENABLE
  5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL
■ LOW "ON" RESISTANCE:
  70Ω TYP. (VCC - VEE = 4.5V)
  50Ω TYP. (VCC - VEE = 9V)
■ WIDE ANALOG INPUT VOLTAGE RANGE: ±6V
■ FAST SWITCHING:
  tpd = 15ns (TYP.) at TA = 25 °C
■ LOW CROSSTALK BETWEEN SWITCHES
■ HIGH ON/OFF OUTPUT VOLTAGE RATIO
■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V
■ LOW SINE WAVE DISTORTION:
  0.02% at VCC - VEE = 9V
■ HIGH NOISE IMMUNITY:
  VNIH = VNIL = 28% VCC (MIN.)
■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4053

 

View
Part Name(s) : M74HCT4053 M74HCT4053B1R M74HCT4053M1R M74HCT4053RM13TR M74HCT4053TTR ST-Microelectronics
STMicroelectronics
Description : TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

DESCRIPTION
The M74HCT4053 is a TRIPLE two-channel ANALOG MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series.
It contains 6 bidirectional and digitally controlled ANALOG switches.
A built-in level shifting is included to allow an input range up to ±6V (peak) for an ANALOG signal with digital control signal of 0 to 6V.

■ LOW POWER DISSIPATION:
   ICC = 4µA (MAX.) at TA=25°C
■ LOGIC LEVEL TRANSLATION TO ENABLE TTL LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL
■ LOW "ON" RESISTANCE:
   70Ω TYP. (VCC - VEE = 4.5V)
   50Ω TYP. (VCC - VEE = 9V)
■ WIDE ANALOG INPUT VOLTAGE RANGE: ±6V
■ FAST SWITCHING:
   tpd = 13ns (TYP.) at TA = 25 °C
■ LOW CROSSTALK BETWEEN SWITCHES
■ HIGH ON/OFF OUTPUT VOLTAGE RATIO
■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V
■ LOW SINE WAVE DISTORTION:
   0.02% at VCC - VEE = 9V
■ COMPATIBLE WITH TTL OUTPUTS:
   VIH = 2V(MIN.) VIL = 0.8V (MAX.)
■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4053

 

View
Part Name(s) : HEF4052B HEF4052BP HEF4052BT HEF4052BTT NXP
NXP Semiconductors.
Description : Dual 4-channel ANALOG MULTIPLEXER/DEMULTIPLEXER

General description
The HEF4052B is a dual 4-channel ANALOG MULTIPLEXER/DEMULTIPLEXER with common channel select logic. Each MULTIPLEXER/DEMULTIPLEXER has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional ANALOG switches, each with one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common input/output (nZ).

Features and benefits
■ Fully static operation
■ 5 V, 10 V, and 15 V parametric ratings
■ Standardized symmetrical output characteristics
■ Specified from 40 C to +85 C and 40 C to +125 C
■ Complies with JEDEC standard JESD 13-B

Applications
ANALOG multiplexing and demultiplexing
■ Digital multiplexing and demultiplexing
■ Signal gating

 

View
Part Name(s) : HEF4053 HEF4053B HEF4053BDF HEF4053BP HEF4053BPN HEF4053BT HEF4053BTD HEF4053BN HEF4053BF HEF4053BD Philips
Philips Electronics
Description : TRIPLE 2-CHANNEL ANALOGue MULTIPLEXER/DEMULTIPLEXER

DESCRIPTION
The HEF4053B is a TRIPLE 2-CHANNEL ANALOGue MULTIPLEXER/DEMULTIPLEXER with a common enable input (E). Each MULTIPLEXER/DEMULTIPLEXER has two independent inputs/outputs (Y0 and Y1), a common input/output (Z), and select inputs (Sn). Each also contains two-bidirectional ANALOGue switches, each with one side connected to an independent input/output (Y0 and Y1) and the other side connected to a common input/output (Z).
With E LOW, one of the two switches is selected (low impedance ON-state) by Sn. With E HIGH, all switches are in the high impedance OFF-state, independent of SA to SC.
VDD and VSS are the supply voltage connections for the digital control inputs (SA to SC and E).
The VDD to VSS range is 3 to 15 V. The ANALOGue inputs/outputs (Y0, Y1 and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD−VEE may not exceed 15 V.
For operation as a digital MULTIPLEXER/DEMULTIPLEXER, VEE is connected to VSS (typically ground).

View
Part Name(s) : M74HCT4051 M74HCT4051B1R M74HCT4051M1R M74HCT4051RM13TR M74HCT4051TTR ST-Microelectronics
STMicroelectronics
Description : SINGLE 8-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

SINGLE 8-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

DESCRIPTION
The M74HCT4051 is a single eight-channel ANALOG MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series.
It contains 8 bidirectional and digitally controlled ANALOG switches.

■ LOW POWER DISSIPATION: ICC=4µA(MAX.)atTA=25°C
■ LOGIC LEVEL TRANSLATION TO ENABLE TTL LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL
■ LOW "ON" RESISTANCE: 70ΩTYP. (VCC-VEE=4.5V) 50ΩTYP. (VCC-VEE=9V)
■ WIDE ANALOG INPUT VOLTAGE RANGE: ±6V
■ FAST SWITCHING:tpd= 13ns (TYP.) at TA=25°C
■ LOW CROSSTALK BETWEEN SWITCHES
■ HIGH ON/OFF OUTPUT VOLTAGE RATIO
■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC-VEE) = 2V TO 12V
■ LOW SINE WAVE DISTORTION: 0.02% at VCC-VEE=9V
■ COMPATIBLE WITH TTL OUTPUTS: VIH = 2V(MIN.) VIL = 0.8V (MAX.)
■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4051

View
Part Name(s) : MC74LVXT8051DT ON-Semiconductor
ON Semiconductor
Description : ANALOG Multiplexer / Demultiplexer

ANALOG Multiplexer / Demultiplexer High−Performance Silicon−Gate CMOS

The MC74LVXT8051 utilizes silicon–gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. This ANALOG MULTIPLEXER/DEMULTIPLEXER controls ANALOG voltages that may vary across the complete power supply range (from VCC to GND).

• Fast Switching and Propagation Speeds
• Low Crosstalk Between Switches
• Diode Protection on All Inputs/Outputs
ANALOG Power Supply Range (VCC – GND) = 2.0 to 6.0 V
• Digital (Control) Power Supply Range (VCC – GND) = 2.0 to 6.0 V
• Improved Linearity and Lower ON Resistance Than Metal–Gate Counterparts
• Low Noise
• In Compliance With the Requirements of JEDEC Standard No. 7A

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]