TaNFilm® High Temperature DIP and SIP Networks
The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride film insure superior continuous performance in high temperature applications over the installed life of the part.
1900HT / 4700HT SERIES
• Inherent reliability
• Custom configurations available
• Bonded leads not susceptible to solder reflow problems
• Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
• Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C
■ Features
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the header pin through type structure and the diverse header variation. The board to board size can be set at infinite stages.
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards arent face each other, and can be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated products are lined up. In addition, the header to correspond to the board to board size are prepared. Concerning board to board size, other products can be provided, in addition to products in this catalog. Please contact HRS company as required.
■ Applications
Internal connection of telephone sets and OA/FA equipment, connection between IPM, IGBT and the board.
■ Features
1. New Insulation Displacement and Crimping Ideas
This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained.
1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case.
2 After connection, the contact can be replaced in excellent maintainability.
3 Because the insulation displacement area is protected by the case, high reliability can be assured.
4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required.
2. Potting Header Available
The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures.
3. Broad Variations
The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available. (Refer to the applicable combination pattern on next page.)
Applications
Business equipment, particularly including the copy machine and printer
DESCRIPTION
The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.
In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.
In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.
The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.
The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.
HARDWARE FEATURES
■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs
■ Standalone and PC driven modes
■ DIP and SO packages supported
SOFTWARE FEATURES
■ Windows based software
■ S19 or INTEL hex file format
■ Features
1. New Insulation Displacement and Crimping Ideas
This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained.
1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case.
2 After connection, the contact can be replaced in excellent maintainability.
3 Because the insulation displacement area is protected by the case, high reliability can be assured.
4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required.
2. Potting Header Available
The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures.
3. Broad Variations
The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available.
(Refer to the applicable combination pattern on next page.)
■ Applications
Business equipment, particularly including the copy machine and printer
Interface Portions and In-line Portions of the Various Units and Devices
Features
● Bottom entry type
● High-pressure type with dimple processing at contact portion
● Flux prevention processing specification also available.* (Specification 05)
* Flux prevention processing: The hole connector is immersed in a flux prevention processing liquid and the surface is coated to prevent flux wicking.
Custom orders of other numbers of Pos. can be accommodated.
Applications
Automotive equipment, IPM, and IGBT.
MINI. FIT JR DUAL ROW 2-24CKT PLUG HOUSING WITH EARS
■ Features
1. Miniature Type and High Density Mounting
These connectors are designed in a miniature and light weight product, and mounted in the high density. The crimping case is structured in the 2mm pitch grid, so that connectors can be arranged for use.
2. Variation in Number of Contacts
In addition to the DIP type, SMT and crimping types are available with broad variations.
3. Stacking Variation
When the connector is used for board to board, set 6mm between boards in conjunction with the pin header A3B, or 5.1mm between boards in conjunction with the pin header A3C.
■ Applications
VTR, vehicle telephones, and other various kinds of electronic equipment
2.5mm Pitch Connector for Discrete Wire Connection
■Features
1. Board Mounting Height (Crimping Type)
10mm2.5mm pitch connector achieves the low profile.
2. Insulation Displacement Area Protected by Protector (ID Type)
The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector has a strong tensile strength against the cable and prevents dusts.
3. Easy Connection by Easy Tool (ID Type)
No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector and fastening it with the ID tool.
4. Intermediate Connection Possible (ID Type)
For intermediate connection, the connector allows signal extraction during cabling.
CONNECTOR ELECTRICAL RECEPTACLE, TYPE PT J()FB, OLIVE DRAB
|