datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : MS1 CRYDOM
Crydom Inc.,
Description : THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

SOLID STATE RELAYSSOLID STATE Control RELAYS • I/O Modules

View
Part Name(s) : CMA3 CMA3-SDC12V CMA3-SDC24V CMA3-SDC6V ETC
Unspecified
Description : kinds of single RELAYS , power RELAYS , automotive RELAYS ...lays , pc-board RELAYS , plug-in RELAYS , PCB RELAYS , miniature RELAYS

kinds of single RELAYS , power RELAYS , automotive RELAYS ...lays , pc-board RELAYS , plug-in RELAYS , PCB RELAYS , miniature RELAYS

View
Part Name(s) : 53200 53203 53204 Micropac
Micropac Industries
Description : SPDT SOLID-STATE RELAYS

DESCRIPTION
The MII 53200, 53203, and 53204 are military SPDT high power, SOLID-STATE RELAYS. These light-weight devices are resistant to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The control logic is CMOS compatible, and will accommodate bias supplies between 4 and 16 VDC. A TTL input driver with pull up resistor may also be used. These SOLID-STATE RELAYS are ideal for use in military systems, or wherever high reliability, low power actuation, and light-weight are design considerations. Applications include general-purpose signal switching and electronic load control.

Features:
• Replacements for M31-1, M31-1A, M31-2 A
• SPDT, Break-Before-Make
• Up to 1500 V RMS Optical Isolation
• Output current up to 8.2 Amps (53203)
• Power FET Output Low On-STATE Resistance
• Full Military Temperature Operation: -55ºC to +125ºC
• Military Environmental Screening Available

Applications:
• Heater Load Switching
• Sensor Activation
• Remote Signal Activation
• Servo and synchro control
• High power switching

 

View
Part Name(s) : PD1201_01 Clare
Clare Inc => IXYS
Description : AC SOLID STATE RELAYS

Description
The PD1201 is an AC SOLID STATE Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD1201 switches are robust enough to provide a blocking voltage of up to 400V and max surge current rating of 20A. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750V of isolation and noise immunity between control and load circuits. As a result the PD1201 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical RELAYS.

Features
• Load Current up to 1A
• Blocking Voltage to 400V
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable

Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contractors
• Large RELAYS
• Solenoids
• Motors
• Heaters

View
Part Name(s) : PD2601 IXYS
IXYS CORPORATION
Description : AC SOLID STATE RELAYS

Description
The PD2601 is an AC SOLID STATE Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD2601 switches are robust enough to provide a blocking voltage of up to 600VP and max surge current rating of 20A. In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result the PD2601 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical RELAYS.

Features
• Load Current up to 1Arms
• Blocking Voltages up to 600VP
• 3750Vrms Input to Output Isolation
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable

Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large RELAYS
• Solenoids
• Motors
• Heaters

View
Part Name(s) : PD2401 IXYS
IXYS CORPORATION
Description : AC SOLID STATE RELAYS

Description
The PD2401 is an AC SOLID STATE Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD2401 switches are robust enough to provide a blocking voltage of up to 500VP and max surge current rating of 20A. In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result the PD2401 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical RELAYS.

Features
• Load Current up to 1Arms
• Blocking Voltages up to 500VP
• 3750Vrms Input to Output Isolation
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable

Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large RELAYS
• Solenoids
• Motors
• Heaters

View
Part Name(s) : PD1201 IXYS
IXYS CORPORATION
Description : AC SOLID STATE RELAYS

Description
The PD1201 is an AC SOLID STATE Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD1201 switches are robust enough to provide a blocking voltage of up to 400VP and max surge current rating of 20A. In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result the PD1201 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical RELAYS.

Features
• Load Current up to 1Arms
• Blocking Voltages up to 400VP
• 3750Vrms Input to Output Isolation
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable

Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large RELAYS
• Solenoids
• Motors
• Heaters

View
Part Name(s) : LH1500 LH1504 LH1510 LH1516 LH1517 LH1518 LH1519 LH1530 LH1535 LH1540 LH1541 LH1550 Siemens
Siemens AG
Description : High Voltage SOLID STATE RELAYS

DESCRIPTION
Siemens SOLID STATE RELAYS (SSRs) are miniature, optically-coupled RELAYS with high-voltage MOSFET outputs. The RELAYS are capable of switching ac or dc loads from as little as nanovolts to hundreds of volts. Likewise, the RELAYS can switch currents in the range of nanoamps to hundreds of milli amps. The MOSFET switches are ideal for small signal switching and are primarily suited for dc or audio frequency applications.

FEATURES
• 3750 Vrms or 5300 Vrms I/O isolation
• Current-limit protection built-in
• Linear ac/dc operation
• High-reliability monolithic receptor
• Extremely low leakage current (pA)
• High contact off-impedance (GW)
• Low power consumption (1 mW—12 mW)
• Very low switch offset (typically 0.1 mV)
• Logic compatible
• Clean, bounce-free switching
• Built-in 1 Form C break-before-make
• High surge capability
• Insensitive to dv/dt
• Surface mountable
• Compatible with UL1459 and FCC 68.302
• UL recognized
• CSA certified
• BABT certificate of recognition to BS6301

View
Part Name(s) : 53209 53210 53211 Micropac
Micropac Industries
Description : SPDT SOLID-STATE RELAYS High Power AC/DC Switching

DESCRIPTION
The 53209, 53210, and 53211 are military SPDT high power, SOLID-STATE RELAYS. These light-weight devices are resistant to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with mechanical equivalents.

Features:
• Replacements for M30-1, M30-3, M30-4
• SPDT, Break-Before-Make
• Up to 1500 V RMS optical isolation
• Output voltage up to ±320 VDC (53211)
• Power FET output low on-STATE resistance
• Full military temperature operation: -55ºC to +125ºC
• Military environmental screening available

Applications:
• High power switching
• Line drivers
• Servo control
• Harsh environment
• Load control
• General purpose switching

View
Part Name(s) : PD2401 PD2401 Clare
Clare Inc => IXYS
Description : AC SOLID STATE RELAYS

Description
The PD2401 is an AC SOLID STATE Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The PD2401 switches are robust enough to provide a blocking voltage of up to 500V and max surge current rating of 20A. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750V of isolation and noise immunity between control and load circuits. As a result the PD2401 is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical RELAYS.

Features
• Load Current up to 1A
• Blocking Voltage to 600V
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable

Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contractors
• Large RELAYS
• Solenoids
• Motors
• Heaters

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]