datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : SII9287B SII9287BCNU Unspecified
Unspecified
Description : HDMI Port Processor with InstaPort Viewing Technology View

[Silicon Image, Inc.]

Introduction
The SiI9287B HDMI Port Processor with InstaPort Viewing Technology is the second generation of HDMI® devices that supPort the HDMI Specification.
With four HDMI inputs and a single output, the SiI9287B Port Processor enhances the functionality of digital TVs using single system on a chip (SoC) solutions with integrated HDMI receivers. The Port Processor provides a simple, low-cost method of retransmitting digital audio and video to give consumers a truly all-digital experience. Built-in backward compatibility with DVI 1.0 allows HDMI systems to connect to any DVI 1.0 source.

Features
The SiI9287B device brings cutting edge innovations, such as:
• InstaPort™ viewing technology that reduces Port
   switching time to less than one second
• Enhanced cable equalization for long cable
   supPort, even at Deep Color resolutions that
   enables the SiI9287B device to work with noisy
   signals and many sources, making the sink devices
   highly interoperable
• Integrated EDID and CEC functions
• Improved ESD protection on all signals connected
   to the HDMI connector.
  
HDMI Inputs and Output
Four HDMI input Ports and single output Port supPort:
HDMI, HDCP, and DVI compatibility
• TMDS™ cores run at 25–225 MHz
• SupPorts video resolutions up to 1080p, 60 Hz, 12-
   bit or 720p/1080i, 120 Hz, 12-bit.

Control Capability
• Consumer Electronics Control (CEC) interface
   Incorporates an HDMI-compliant CEC I/O and an
   integrated CEC Programming Interface (CPI);
   these simplify design and lower cost and software
   overhead
• Integrated EDID and DDC supPort for 4
   HDMI/DVI Ports and 1 VGA Port with a 256-byte
   NVRAM shared between Ports that loads into
   separate 256-byte SRAM for each of 5 Ports
• Individual control of Hot Plug Detect (HPD) for
   each of the 4 HDMI/DVI Ports
• TPWR (TMDS clock detect) output to help speed
   soft mute of audio while plugging and unplugging
   cables
• Controllable by the local I2C bus.

Power Management
• Flexible power management provides extremely
   low standby power consumption
• Standby power can be supplied from an HDMI 5-V
   signal or from a separate +3.3 V or 5 V standby
   power pin
Port power only can be used to read EDID
• Single power 3.3-V source
• Integrated 5 V to 3.3 V Voltage regulator.

Package
• 72-pin, 10 mm x 10 mm, 0.5 mm pitch QFN
   package with enhanced ePad™.

Part Name(s) : SII1292 ETC1
Unspecified
Description : MHL™/HDMI®-to-HDMI Bridge View

[Silicon Image]

Single-Port, auto-sensing, MHL/HDMI-to-HDMI bridge device for HD audio and video connectivity to HDTVs, PC monitors, projectors, and multi-function monitors (MFMs)

The SiI1292 enables an existing HDMI input to upgrade to a low-power, auto-sensing MHL/HDMI input solution, which facilitates HD audio and video connectivity between MHL-enabled mobile devices and HDTVs, PC monitors, projectors and MFMs.

Key Features
◆ Dual-mode MHL or HDMI input
◆ Adaptive equalizer for HDMI long-cable supPort
◆ Low BOM cost

Benefits Summary
◆ Low-power consumption
◆ Small package
◆ Adds MHL to one HDMI Port

Applications
◆ MHL-enabled HDTVs
◆ MHL-enabled PC Monitors
◆ MHL-enabled Projectors
◆ MHL-enabled MFMs

Industry-Standard Compliance
HDMI 1.4
◆ MHL

Part Name(s) : SII1292 SII1292CNUC SILICONIMAGE
Silicon image
Description : MHL Bridge and HDMI Monitor Receiver View

General Description
The SiI1292 MHL Bridge and HDMI Monitor Receiver facilitates the design of low-pin count, low-power mobile-to-standard HDMI®-interoperable applications.
The Silicon Image Mobile High-definition Link (MHL™) technology carries formatted video and audio from compatible transmitters, using only 3 signal lines, power, and ground (5 pins total) compared to the 19 pins required for the standard High Definition Multimedia Interface (HDMI).
As an MHL bridge, the SiI1292 device supPorts a single MHL input to provide MHL capability in computer or multimedia display devices.

Features
● The MHL input function of the bridge receives
   data over a single differential pair instead of four pairs
● A single-wire control bus supPorts all sideband
   signaling for DDC, Remote Control, and Hot Plug
   Detect (HPD)
● The bridge converts data received in the MHL
   format to standard HDMI, and supPorts all
   resolutions ranging from 25 MHz to 75 MHz
HDMI receiver mode supPorts all resolutions
   between 25–225 MHz Including 1080p60 12-bit Deep Color

The combined transmitter and bridge implements a total A/V interface solution with the following features:
● I2C interface for configuration by local microcontroller
● Built-in adaptive equalizer for long cable supPort on HDMI
HDMI and DVI 1.0 transmitter compatibility
● Low power 1.2 V core
● 40-pin QFN, 6 mm x 6 mm body size
● Extended commercial temperature range
   (–20 C to +85 °C).

Part Name(s) : CM2020-00TR CM2020-00TS CM2020 CALMIRCO
California Micro Devices Corp
Description : HDMI Transmitter Port Protection and Interface Device View

Product Description
The CM2020 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection. An integrated package provides all ESD, level shift,
overcurrent output protection and backdrive protection for an HDMI Port in a single 38-Pin TSSOP package.

Features
• 0.05pF matching capacitance between the TMDS intra-pair
• Overcurrent output protection
• Level shifting circuitry, Including ±8kV ESD protection on all TMDS lines
• Matched 0.5mm trace spacing (TSSOP)
• Simplified layout for HDMI connectors
• Backdrive protection

Applications
• PC
• Consumer Electronics
• Set Top Box
• Displays and Digital Television


Part Name(s) : CM2030 CM2030-A0TR CALMIRCO
California Micro Devices Corp
Description : HDMI Transmitter Port Protection and Interface Device View

Product Description
The CM2030 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection.
An integrated package provides all ESD, slew rate limiting on CEC line, level shifting/isolation, overcurrent output protection and backdrive protection for an HDMI Port in a single 38-Pin TSSOP package.

Features
HDMI 1.3 compliant
• SupPorts thin dielectric and 2-layer boards
• Minimizes TMDS skew with 0.05pF matching
• Long HDMI cable supPort with integrated I2C accelerator
• Active termination and slew rate limiting for CEC
• SupPorts direct connection to CEC microcontroller
• Integrated I2C level shifting to CMOS level Including low logic level voltages
• Integrated 8kV ESD protection and backdrive protection on all external I/O lines
• Integrated overcurrent output protection per HDMI 1.3
• MultiPort I2C supPort eliminates need for analog mux on DDC lines
• Simplified layout with matched 0.5mm trace spacing

Applications
• PC and consumer electronics
• Set top box, DVD RW, PC, graphics cards

Part Name(s) : CM2021 CM2021-00TS CM2021-00TR CALMIRCO
California Micro Devices Corp
Description : HDMI Receiver Port Protection and Interface Device View

Product Description
The CM2021 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection.

Features
• 0.05pF matching capacitance between the TMDS intra-pair
• Level shifting circuitry, Including ±8kV ESD protection on all TMDS lines
• Matched 0.5mm trace spacing (TSSOP)
• Simplified layout for HDMI connectors
• Backdrive protection

Applications
• PC
• Consumer Electronics
• Set Top Box
• Displays and Digital Television

Part Name(s) : TMDS361B TMDS361BPAG TMDS361BPAGR TI
Texas Instruments
Description : Three-Port HDMI Switch View

DESCRIPTION
The TMDS361B is a three-Port digital video interface (DVI) or high-definition multimedia interface (HDMI) switch that allows up to three DVI or HDMI Ports to be switched to a single display terminal. Four TMDS channels, one hot-plug detector, and a digital display control (DDC) interface are supPorted on each Port. Each TMDS channel supPorts signaling rates up to 3 Gbps to allow 1080p resolution in 16-bit color depth. TMDS361B is not intended for source side applications such as external switch boxes.
The TMDS361B provides an adaptive equalizer for different ranges of cable lengths. The equalizer automatically compensates for intersymbol interference [ISI] loss of an HDMI/DVI cable for up to 20 dB at 3 Gbps.

FEATURES
• 3:1 Sink-side switch SupPorting DVI Above 1920 × 1200 and HDMI HDTV Resolutions up to 1080p With 16-Bit Color Depth
• Designed for Signaling Rates up to 3 Gbps
• SupPorts HDMI 1.3a Specification
• Adaptive Equalization on inputs to supPort up to 20-m HDMI Cable at 2.25 Gbps for 1080p 12-Bit Color Depth
• TMDS Input Clock-Detect Circuit
• DDC Repeater Function
• <2-mW Low-Power Mode
• Local I2C or GPIO Configurable
• Enhanced ESD. HBM: 10 kV on All Input TMDS, DDC I2C, HPD Pins
• 3.3-Volt Power Supply
• Temperature Range: 0°C to 70°C
• 64-Pin TQFP Package: Pin-Compatible With TMDS351
• Robust TMDS Receive Stage That Can Work With Non-Compliant Input Common-Mode HDMI Signal

APPLICATIONS
• High-Definition Digital TV
   – LCD
   – Plasma
   – DLP®

Part Name(s) : TMDS261B TMDS261BPAG TMDS261BPAGR TI
Texas Instruments
Description : Two-Port HDMI Switch View

DESCRIPTION
The TMDS261B is a two-Port digital video interface (DVI) or high-definition multimedia interface (HDMI) switch that allows up to two DVI or HDMI Ports to be switched to a single display terminal. Four TMDS channels, one hot-plug detector, and a digital display control (DDC) interface are supPorted on each Port. Each TMDS channel supPorts signaling rates up to 3 Gbps to allow 1080p resolution in 16-bit color depth. TMDS261B device is not intended for source side applications such as external switch boxes.
The TMDS261B provides an adaptive equalizer for different ranges of cable lengths. The equalizer automatically compensates for intersymbol interference [ISI] loss of an HDMI/DVI cable for up to 20 dB at 3 Gbps (see Figure 15).

FEATURES
• 2:1 Sink-side switch SupPorting DVI Above
   1920 × 1200 and HDMI HDTV Resolutions up to
   1080p With 16-Bit Color Depth
• Designed for Signaling Rates up to 3 Gbps
• SupPorts HDMI 1.3a Specification
• Adaptive Equalization on inputs to supPort up
   to 20-m HDMI Cable at 2.25 Gbps for 1080p
   12-Bit Color Depth
• TMDS Input Clock-Detect Circuit
• DDC Repeater Function
• <2-mW Low-Power Mode
• Local I2C or GPIO Configurable
• Enhanced ESD. HBM: 10 kV on All Input TMDS, DDC I2C, HPD Pins
• 3.3-Volt Power Supply
• Temperature Range: 0°C to 70°C
• 64-Pin TQFP Package: Pin-Compatible With TMDS251
• Robust TMDS Receive Stage That Can Work
   With Non-Compliant Input Common-Mode HDMI Signal

APPLICATIONS
• High-Definition Digital TV
   – LCD
   – Plasma
   – DLP®

Part Name(s) : ADV7441A ADV7441ABSTZ-110 ADV7441ABSTZ-170 ADV7441ABSTZ-5P1 EVAL-ADV7441AFEZ_1 EVAL-ADV7441AFEZ_2 ADI
Analog Devices
Description : 10-Bit Integrated, Multiformat SDTV/HDTV Video Decoder, RGB Graphics Digitizer, and 2:1 Multiplexed HDMI/DVI Interface View

GENERAL DESCRIPTION
The ADV7441A is a high quality multiformat video decoder and graphics digitizer with an integrated 2:1 multiplexed HDMI™ receiver.
The ADV7441A contains two main processing sections. The first section is the standard definition Processor (SDP), which processes all types of PAL, NTSC, and SECAM signals. The second section is the component Processor (CP), which processes YPrPb and RGB component formats, Including RGB graphics. The CP also processes the video signals from the HDMI receiver. The ADV7441A can keep the HDCP link between a HDMI source and the selected HDMI Port active in analog mode operation. This allows for fast switching between the analog and HDMI modes.

 

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]