datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight

[PACIFIC DISPLAY DEVICES]

Product Overview
• 128 x 64 dot matrix LCD
• STN (Super Twisted Nematic) or FSTN (Film compensated Super Twisted Nematic) Technology
• T-6963 (or equivalent) Graphics Controller IC w/ 8K SRAM.
• Multiplex drive : 1/64 duty, 1/9 bias
• LCD Module Service Life: 100,000 hours minimum

Description : 16 Character by 2 Line Alphanumeric LCD Assembly With Embedded Controller

[PACIFIC DISPLAY DEVICES]

GENERAL INFORMATION
Product Overview
• 16 Character x 2 line Alphanumeric Dot Matrix LCD Module
• LCD Controller: Embedded S6A0069 or equivalent alpha-numeric controller
• Multiplexing driving: 1/16 duty, 1/5 bias
• Operating Mode: Super Twisted Nematic (STN) technology
• LCD Module Service Life: 100,000 hours minimum

 

Description : SMD INDUCTORS

FEATURES:
* SUPERIOR QUALITY FROM AN AUTOMATED PRODUCTION LINE.
* PICK AND PLACE COMPATIBLE.
* TAPE AND REEL PACKING.

APPLICATION:
* NOTEBOOK COMPUTERS
* DC-DC CONVERTERS.
* DC-AC INVERTERS.
* SIGNAL CONDITIONING
* CELLULAR TELEPHONES
* FILTERING.
* HYBRIDS
* PAGERS.

Description : SMD POWER INDUCTORS

FEATURES:
• SUPERIOR QUALITY FOR AN AUTOMATED PRODUCTION LINE.
• PICK AND PLACE COMPATIBLE.
• TAPE AND REEL PACKING.

APPLICATION:
• NOTEBOOK COMPUTERS.
• DC-DC CONVERTORS
• DC-AC INVERTERS
• CABLE MODEM

Description : Single Coil Fan Motor Full Wave Driver

General Description
The AP1304/5 is single phase full wave drive design, which is suited for small fans (such as CPU cooling fans). The low switching noise and effective motor drive are another advantage. All functions, including lock shutdown, automatic restart, rotation detection (RD), and speed indication output (FG) have been incorporated into one chip. When the motor is under lock condition, lock shutdown function turns off the output current. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the RD function is to detect the motor status and the FG is to provide the rotation speed. 

„  Features
- Compatible to a Hall element
- Operating voltage (VCC) : 4V to 20V
- Lock shutdown and automatic restart
- Speed indication output (FG) named as AP1301/4
- Rotation detection output (RD) named as AP1302/5
- Output current(AP1301/2) IO=500mA(max)
- Output current(AP1304/5) IO=350mA(max)
- Operating temperature (Topr) : -30ºC to +85ºC
- SOP-8L/ SOP-8L EP package
- Include Thermal Shutdown circuit

Description : DOUBLE GROUP CONVERSION Relay

[SONGLE Relay]

Features
• Miniature volume, PCB usage
• Contact rating:1A/3A/5A
• Double group individual load

Description : Single Phase Hall Effect Latch

■ General Description
ATS477 that integrates Hall sensor with output drivers is designed for electrical commutation of brush-less DC motor application. The device includes on-chip Hall voltage generator for magnetic sensing, the error amplifier that amplifies the Hall voltage, a comparator that is to provide switching hysteresis for noise rejection, the bi-direction drivers for sinking and driving large current load, and the frequency generator (FG) that provides a signal proportional to rotation speed. Internal bandgap regulator is used to provide temperature compensated bias for internal circuits and allows a wide operating supply voltage range. Built-in protection circuit and output shunt Zener diodes were applied for protecting output drivers during operating.
If a magnetic flux density is larger than threshold Bop, DO is turned to sink and DOB is turned to drive. The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned to drive and DOB turned to sink.
ATS477 is rated for operation over-temperature range from -20 oC to 85 oC and voltage range from 3.5V to 20V. The devices are available in low cost die forms or rugged SIP-4L and power SOP-7L packages.

■ Features
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range
- High output sinking capability up to 250mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Build-in shunt Zener protection for output driver
- SOP-7L provide FG output pin
- Package: SIP-4L and SOP-7L

■ Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor

Description : Single Phase Hall Effect Latch

■ General Description
ATS477 that integrates Hall sensor with output drivers is designed for electrical commutation of brush-less DC motor application. The device includes on-chip Hall voltage generator for magnetic sensing, the error amplifier that amplifies the Hall voltage, a comparator that is to provide switching hysteresis for noise rejection, the bi-direction drivers for sinking and driving large current load, and the frequency generator (FG) that provides a signal proportional to rotation speed. Internal bandgap regulator is used to provide temperature compensated bias for internal circuits and allows a wide operating supply voltage range. Built-in protection circuit and output shunt Zener diodes were applied for protecting output drivers during operating.
If a magnetic flux density is larger than threshold Bop, DO is turned to sink and DOB is turned to drive. The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned to drive and DOB turned to sink.
ATS477 is rated for operation over-temperature range from -20 oC to 85 oC and voltage range from 3.5V to 20V. The devices are available in low cost die forms or rugged SIP-4L and power SOP-7L packages.

■ Features
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range
- High output sinking capability up to 250mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Build-in shunt Zener protection for output driver
- SOP-7L provide FG output pin
- Package: SIP-4L and SOP-7L

■ Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor

Description : 7/8-Bit Single/Dual SPI Digital POT with Volatile Memory

Description
The MCP41XX and MCP42XX devices offer a wide range of product offerings using an SPI interface. This family of devices support 7-bit and 8-bit resistor networks, and Potentiometer and Rheostat pinouts.

Features
• Single or Dual Resistor Network options
• Potentiometer or Rheostat configuration options
• Resistor Network Resolution
    - 7-bit: 128 Resistors (129 Steps)
    - 8-bit: 256 Resistors (257 Steps)
• RAB Resistances options of:
    - 5 kΩ
    - 10 kΩ
    - 50 kΩ
    - 100 kΩ
• Zero Scale to Full-Scale Wiper operation
• Low Wiper Resistance: 75Ω (typical)
• Low Tempco:
    - Absolute (Rheostat): 50 ppm typical (0°C to 70°C)
    - Ratiometric (Potentiometer): 15 ppm typical
• SPI Serial Interface (10 MHz, modes 0,0 & 1,1)
    - High-Speed Read/Writes to wiper registers
    - SDI/SDO multiplexing (MCP41X1 only)
• Resistor Network Terminal Disconnect Feature via:
    - Shutdown pin (SHDN)
    - Terminal Control (TCON) Register
• Brown-out reset protection (1.5V typical)
• Serial Interface Inactive current (2.5 uA typical)
• High-Voltage Tolerant Digital Inputs: Up to 12.5V
• Supports Split Rail Applications
• Internal weak pull-up on all digital inputs
• Wide Operating Voltage:
    - 2.7V to 5.5V - Device Characteristics Specified
    - 1.8V to 5.5V - Device Operation
• Wide Bandwidth (-3 dB) Operation:
    - 2 MHz (typical) for 5.0 kΩ device
• Extended temperature range (-40°C to +125°C)

Description : HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE Relay

FEATURES
• High sensitivity: 200 mW pick-up power
                       100 mW pick-up power types available
• Latching types available
• High switching capacity: 60 W, 125 V A
• High breakdown voltage: 1,500 V FCC surge between open contacts
                                    1,000 V AC between open contacts
• DIP-1C type can be used with 14 pin IC socket
        2C type can be used with 16 pin IC socket,
        4C type can be used with 2 sets of 14 pin IC sockets
• Gold-cap silver palladium types available for 2 Form C type
• Bifurcated contacts are standard

TYPICAL APPLICATIONS
• Telecommunication equipment
• Office equipment
• Computer peripherals
• Security equipment
• Measuring instrumentation

 

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]