datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : LM393 LM393M LM393N WingShing
Wing Shing International Group
Description : Dual DIFFERENTIAL COMPARATORS

General Description
consists of two independent precision voltage COMPARATORS with an offset voltage specification as low as 2.0 mV max for two COMPARATORS which were designed specifically to operate from a SINGLE power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These COMPARATORS also have a unique characteris
tic in that the input common-mode voltage range includes ground, even though operated from a SINGLE power supply voltage.

Features
Wide supply
— Voltage range: 2.0V to 36V
SINGLE or dual supplies: ±1.0V to ±18V
Very low supply current drain (0.4 mA) — independent of supply voltage
Low input biasing current: 25 nA
Low input offset current: ±5 nA
Maximum offset voltage: ±9mV
Input common-mode voltage range includes ground
DIFFERENTIAL input voltage range equal to the power supply voltage
Low output saturation voltage,:  150mV at 4mA
Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems

View
Part Name(s) : TLC374CDB TLC374CDBR TLC374CNS TI
Texas Instruments
Description : LinCMOS™ QUADRUPLE DIFFERENTIAL COMPARATORS

description
These quadruple DIFFERENTIAL COMPARATORS are fabricated using LinCMOS™ technology and consist of four independent voltage COMPARATORS designed to operate from a SINGLE power supply.

SINGLE- or Dual-Supply Operation
● Wide Range of Supply Voltages
   2 V to 18 V
● Very Low Supply Current Drain 0.3 mA Typ
   at 5 V
● Fast Response Time . . . 200 ns Typ for
   TTL-Level Input Step
● Built-In ESD Protection
● High Input Impedance . . . 1012 Ω Typ
● Extremely Low Input Bias Current 5 pA Typ
● Ultrastable Low Input Offset Voltage
● Input Offset Voltage Change at Worst-Case
   Input Conditions Typically 0.23 µV/Month,
   Including the First 30 Days
● Common-Mode Input Voltage Range
   Includes Ground
● Outputs Compatible With TTL, MOS, and
   CMOS
● Pin-Compatible With LM339

View
Part Name(s) : TLV1391Y TI
Texas Instruments
Description : SINGLE DIFFERENTIAL COMPARATORS

description
The TLV1391 is a DIFFERENTIAL comparator built using a Texas Instruments low-voltage, high-speed bipolar process. These devices have been developed specifically for low-voltage, SINGLE-supply applications. Their enhanced performance makes them excellent replacements for the LM393 in the improved 3-V and 5-V system designs of today.
The TLV1391, with its typical supply current of only 80 µA, is ideal for low-power systems. Response time also has been improved to 0.7 µs.
The TLV1391C is characterized for operation from 0°C to 70°C and the TLV1391I is characterized for operation from –40°C to 85°C.

● Low-Voltage and SINGLE-Supply Operation
   VCC = 2 V to 7 V
● Common-Mode Voltage Range Includes
   Ground
● Fast Response Time . . . 0.7 µs Typ
● Low Supply Current . . . 80 µA Typ and
   150 µA Max
● Fully Specified at 3-V and 5-V Supply
   Voltages
● Available in SOT-23 (DBV) Packaging

View
Part Name(s) : LP339J LP239J LP2901J TI
Texas Instruments
Description : LOW-POWER QUAD DIFFERENTIAL COMPARATORS

description
The LP239, LP339, LP2901 are low-power quadruple DIFFERENTIAL COMPARATORS. Each device consists of four independent voltage COMPARATORS designed specifically to operate from a SINGLE power supply and typically to draw 60-µA drain current over a wide range of voltages. Operation from split power supplies is also possible and the ultralow power supply drain current is independent of the power supply voltage.
Applications include limit COMPARATORS, simple analog-to-digital converters, pulse generators, squarewave generators, time delay generators, voltage controlled oscillators, multivibrators, and high-voltage logic gates. The LP239, LP339, LP2901 were specifically designed to interface with the CMOS logic family. The ultralow power supply current makes these products desirable in battery-powered applications.
The LP239 is characterized for operation from – 25°C to 85°C. The LP339 is characterized for operation from 0°C to 70°C. The LP2901 is characterized for operation from – 40°C to 85°C.

● Ultralow Power Supply Current Drain . . . 60 µA Typ
● Low Input Biasing Current . . . 3 nA
● Low Input Offset Current . . . ±0.5 nA
● Low Input Offset Voltage . . . ±2 mV
● Common-Mode Input Voltage Includes Ground
● Output Voltage Compatible With MOS and CMOS Logic
● High Output Sink-Current Capability (30 mA at VO = 2V)
● Power Supply Input Reverse-Voltage Protected
SINGLE-Power-Supply Operation
● Pin-for-Pin Compatible With LM239, LM339, LM2901

View
Part Name(s) : GSCLM393 GTM
GTM CORPORATION
Description : Dual DIFFERENTIAL COMPARATORS

Description
The GSCLM393 consists of two independent voltage COMPARATORS, designed specifically to operate from a SINGLE power over a wide voltage range.

Features
*SINGLE or dual supply operation.
*Wide operating supply range (Vcc=2V~36V or ±1 to ±18V).
*Input common-mode voltage includes ground.
*Low supply current drain ICC =0.8mA (Typical).
*Low input bias current Ibias=25nA (Typical)
*Output compatible with TTL, DTL, and CMOS logic system.

View
Part Name(s) : TLV1391 TLV1391C TLV1391CDBVR TLV1391CDBVT TLV1391I TLV1391IDBVR TLV1391IDBVT TLV1391IDBVTG4 Y3D6 Y3DB Y3E6 Y3DG Y3EB Texas-Instruments
Texas Instruments
Description : SINGLE DIFFERENTIAL COMPARATORS

description/ordering informaton
The TLV1391 is a DIFFERENTIAL comparator built using a Texas Instruments low-voltage, high-speed bipolar process. These devices have been developed specifically for low-voltage, SINGLE-supply applications. Their enhanced performance makes them excellent replacements for the LM393 in the improved 3-V and 5-V system designs.
The TLV1391, with its typical supply current of only 80 µA, is ideal for low-power systems. Response time also has been improved to 0.7 µs.

● Low-Voltage and SINGLE-Supply Operation
   VCC = 2 V to 7 V
● Common-Mode Voltage Range Includes
   Ground
● Fast Response Time . . . 0.7 µs Typ
● Low Supply Current . . . 80 µA Typ and
   150 µA Max
● Fully Specified at 3-V and 5-V Supply
   Voltages

View
Part Name(s) : TLV1391 TLV1391C TLV1391CDBV TLV1391CDBVRE4 TLV1391CDBVTE4 TLV1391I TLV1391IDBV TLV1391IDBVRE4 TLV1391IDBVTE4 TLV1391CDBVR VABC TLV1391CDBVT TLV1391IDBVR VABI TLV1391IDBVT TI
Texas Instruments
Description : SINGLE DIFFERENTIAL COMPARATORS

description/ordering informaton
The TLV1391 is a DIFFERENTIAL comparator built using a Texas Instruments low-voltage, high-speed bipolar process. These devices have been developed specifically for low-voltage, SINGLE-supply applications. Their enhanced performance makes them excellent replacements for the LM393 in the improved 3-V and 5-V system designs. The TLV1391, with its typical supply current of only 80 µA, is ideal for low-power systems. Response time also has been improved to 0.7 µs.

● Low-Voltage and SINGLE-Supply Operation VCC= 2 V to 7 V
● Common-Mode Voltage Range Includes Ground
● Fast Response Time. . . 0.7 µs Typ
● Low Supply Current...80 µA Typ and 150 µA Max
● Fully Specified at 3-V and 5-V Supply Voltages

View
Part Name(s) : LM2903QFK LM2903QJG LM2903QPW LM2903Q TI
Texas Instruments
Description : DUAL DIFFERENTIAL COMPARATORS

description/ordering information
These devices consist of two independent voltage COMPARATORS that are designed to operate from a SINGLE power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships

SINGLE Supply or Dual Supplies
● Wide Range of Supply Voltage
    − Max Rating . . . 2 V to 36 V
    − Tested to 30 V . . . Non-V Devices
    − Tested to 32 V . . . V-Suffix Devices
● Low Supply-Current Drain Independent of Supply Voltage . . . 0.4 mA Typ Per Comparator
● Low Input Bias Current . . . 25 nA Typ
● Low Input Offset Current . . . 3 nA Typ (LM193)
● Low Input Offset Voltage . . . 2 mV Typ
● Common-Mode Input Voltage Range Includes Ground
DIFFERENTIAL Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . ±36 V
● Low Output Saturation Voltage
● Output Compatible With TTL, MOS, and CMOS

View
Part Name(s) : LP239 LP239D LP239N LP239DR LP2901 LP2901D LP2901DE4 LP2901DR LP2901DRE4 LP2901DRG4 LP2901N LP2901NE4 LP339 LP339D LP339DE4 LP339DG4 LP339DR LP339DRE4 LP339DRG4 LP339N LP339NE4 TI
Texas Instruments
Description : LOW-POWER QUAD DIFFERENTIAL COMPARATORS

description/ordering information
The LP239, LP339, LP2901 are low-power quadruple DIFFERENTIAL COMPARATORS. Each device consists of four independent voltage COMPARATORS designed specifically to operate from a SINGLE power supply and typically to draw 60-µA drain current over a wide range of voltages. Operation from split power supplies also is possible and the ultra-low power-supply drain current is independent of the power-supply voltage.
Applications include limit COMPARATORS, simple analog-to-digital converters, pulse generators, squarewave generators, time-delay generators, voltage-controlled oscillators, multivibrators, and high-voltage logic gates. The LP239, LP339, LP2901 were designed specifically to interface with the CMOS logic family. The ultra-low power-supply current makes these products desirable in battery-powered applications.
The LP239 is characterized for operation from −25°C to 85°C. The LP339 is characterized for operation from 0°C to 70°C. The LP2901 is characterized for operation from −40°C to 85°C.

● Wide Supply-Voltage Range . . . 3 V to 30 V
● Ultralow Power Supply Current Drain . . . 60 µA Typ
● Low Input Biasing Current . . . 3 nA
● Low Input Offset Current . . . ±0.5 nA
● Low Input Offset Voltage . . . ±2 mV
● Common-Mode Input Voltage Includes Ground
● Output Voltage Compatible With MOS and CMOS Logic
● High Output Sink-Current Capability (30 mA at VO = 2V)
● Power Supply Input Reverse-Voltage Protected
SINGLE-Power-Supply Operation
● Pin-for-Pin Compatible With LM239, LM339, LM2901

View
Part Name(s) : LM393YD LM393YFK LM393YJG LM393YP LM393YPW LM393Y TI
Texas Instruments
Description : DUAL DIFFERENTIAL COMPARATORS

description/ordering information
These devices consist of two independent voltage COMPARATORS that are designed to operate from a SINGLE power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM193 is characterized for operation from −55°C to 125°C. The LM293 and LM293A are characterized for operation from −25°C to 85°C. The LM393 and LM393A are characterized for operation from 0°C to 70°C. The LM2903 is characterized for operation from −40°C to 125°C.

SINGLE Supply or Dual Supplies
● Wide Range of Supply Voltage
   − Max Rating . . . 2 V to 36 V
   − Tested to 30 V . . . Non-V Devices
   − Tested to 32 V . . . V-Suffix Devices
● Low Supply-Current Drain Independent of
   Supply Voltage . . . 0.4 mA Typ Per Comparator
● Low Input Bias Current . . . 25 nA Typ
● Low Input Offset Current . . . 3 nA Typ (LM193)
● Low Input Offset Voltage . . . 2 mV Typ
● Common-Mode Input Voltage Range Includes Ground
DIFFERENTIAL Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . ±36 V
● Low Output Saturation Voltage
● Output Compatible With TTL, MOS, and CMOS

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]