P/N + Description + Content Search

Description
Vectron’s V-Type Voltage Controlled Crystal Oscillator (VCXO) is a quartz stabilized square wave generator with a CMOS output and is tested at CMOS and TTL (5.0 volt operation) logic levels.
The V-Type’s small footprint and low profile make it ideally suitable for PCMCIA applications as well as any other where size is limited but performance is required.

Features
• Output frequencies to 80.000 MHz
• 5.0 or 3.3 V operation
• Tri-State Output
• Low jitter < 6ps rms
• VCXO with CMOS outputs
• APR to 100 ppm
• 0/70 or –40/85 °C temperature range
• Hermetically sealed ceramic SMD package

Applications
• SONET/SDH
• DWDM
• xDSL/PCMCIA cards
• Digital Video

PRODUCT DESCRIPTION
The SST89E516RDx and SST89V516RDx are members of the FlashFlex family of 8-bit microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant costand reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 microcontrol ler devices.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
– Fully Software Compatible
– Development Toolset Compatible
– Pin-For-Pin Package Compatible
• SST89E516RD2 Operation
– 0 to 40 MHz at 5V
• SST89V516RD2 Operation
– 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
– 64 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
– Individual Block Security Lock with SoftLock
– Concurrent Operation during In-Application Programming (IAP)
– Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
– Framing Error Detection
– Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
– Four External Interrupt Inputs
• Programmable Watchdog Timer (WDT)
• Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
– Power-down Mode with External Interrupt Wake-up
– Idle Mode
• Temperature Ranges:
– Commercial (0°C to +70°C)
– Industrial (-40°C to +85°C)
• Packages Available
– 40-contact WQFN (Port 4 feature not available)
– 44-lead PLCC
– 40-pin PDIP (Port 4 feature not available)
– 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

[MILL-MAX]

DUAL-IN-LINE SOCKETS Standard Solder Tail Open Frame

• All DIP sockets accept 0,38 - 0,64mm diameter & standard IC leads.
• Hi-Rel, 4-finger BeCu #30 contact is rated at 3 amps. See page 208 for details.
• Series 110 sockets use MM #1001 pins. See page 134 for details.
• Insulators are high temp. thermoplastic.

GENERAL SPECIFICATION :
a) IDC1 : Based on inductance change (△L/Lo: <30%) @ ambient temp. 25°C
b) IDC2 : Based on temperature rise (△T: 40°C Typ.)
c) Rated current : IDC1 or IDC2, whichever value is lower
d) Storage temp. : -40°C to +105°C
e) Operating temp. : -40°C to +105°C ( include self temp. rise )
f) Resistance to solder heat : 260°C 10secs

[Mill-Max]

MALE PCB PINS SOLDER TERMINALS SLOTTED

[KYCON]

Product Features
    Low Profile Design Suitable for PC Add-On
    Board Applications
    Available in 4, 6, 8, and 10 Position Housings
    Available Fully Shielded for EMI/RFI Protection
    CSA/NRTL Certified File No. LR78160
    UL File No. E134345
   

General Description
The G5130/G5131 boost converter is designed for use of main power source on portable equipments.
It consist of an oscillator, PSM control logic circuit, an embedded power MOS (LX switch), accurate voltage reference, error amplifier, feedback resistors, and LX protection circuit.
Only 3 external components (includes 1 inductor, 1 diode and 1 capacitor) are needed to construct the power application.
For larger output power application, G5131 can be used to drive an external NPN device for more input current.

Features
■ 1~4 Cell Alkaline Battery Operating Range
■ Output Voltage Range: 2.5V~5.0V in 0.1V In crements
■ Minimum External Component (L, D, C)
■ 100KHz Max. Oscillation Frequency
■ 75% Duty Ratio
■ Up to 80% Efficiency
■ ±2% High Output Voltage Accuracy
■ < 100ppm/°C Temperature Coefficient
■ SOT-89 and SOT-23-5 Small Packages

Applications
■ Power Source for Portable Equipments
■ Handheld Computers, Palmtops
■ Digital Still Cameras, Camcorders
■ Cellular Phones, Pagers
■ Portable Multimedia Players

Microcontrollers

SAMSUNG/143136-DI1.png" data-cke-saved-src="//www.datasheetbank.com/detail-image1/SAMSUNG/143136-DI1.png">

Description
TEMIC’s 80C52 and 80C32 are high performance CMOS versions of the 8052/8032 NMOS single chip 8 bit µC.
The fully static design of the TEMIC 80C52/80C32 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data.

Features
● Power control modes
● 256 bytes of RAM
● 8 Kbytes of ROM (80C52)
● 32 programmable I/O lines
● Three 16 bit timer/counters
● 64 K program memory space
● 64 K data memory space
● Fully static design
● 0.8µ CMOS process
● Boolean processor
● 6 interrupt sources
● Programmable serial port
● Temperature range : commercial, industrial, automotive, military

C-Band DWDM DFB Laser Component

The 1754C laser component is a Dense Wavelength Division Multiplexing (DWDM) laser for analog CATV applications. It features a distributed-feedback (DFB) device that has been designed specifically for radio frequency (RF) and CATV applications. The 1754C laser component has a wide temperature range for reliable performance in harsh node environments and narrow transmitter designs. It also features low adiabatic chirp to maximize signal quality in short and long lengths of fiber. The laser’s excellent inherent linearity minimizes degradation of the broadcast signals caused by quadrature amplitude modulated (QAM) channels.
The 1754C is available in all C-band ITU grid wavelengths.

Features
■ Standard ITU Grid Wavelengths
■ Advanced Analog Chip Design
■ Reduced Equipment Requirements in the Hub
■ OC-48 Pin Out
■ Telcordia Technologies™ 468 Compliant
■ Wide Temperature Range – Stable Even in Harsh Environments
■ RoHS Compliant

Applications
■ CATV Broadcast Networks
■ Networks with Limited Fiber
■ Archtectures Using Separate Optical Wavelengths to Carry Targeted Services