datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : G1201 G1201P1U G1201P1UF G1201P1 GMT
Global Mixed-mode Technology Inc
Description : RAIL-TO-RAIL I/O, 100MA OUTPUT SINGLE-SUPPLY AMPLIFIERS

General Description
The G1201 is dual RAIL-TO-RAIL input and OUTPUT SINGLE-SUPPLY AMPLIFIERS featuring 100MA OUTPUT drive current. This high OUTPUT current makes these AMPLIFIERS excellent for driving either resistive or capacitive loads. AC performance is very good with 3.5MHz bandwidth, 6.2V/µs-slew rate and low distortion. All are guaranteed to operate from a +3 volt single supply as well as a +5 volt supply.
The very low input bias currents enable the G1201 to be used for integrators and diode amplification and other applications requiring low input bias current. Allowing low current applications to control high current loads.
Applications include audio amplification for computers, sound ports, sound cards and set-top boxes. The G1201 is very stable and capable of driving heavy capacitive loads.
The ability to swing RAIL-TO-RAIL at the inputs and OUTPUTs enables designers to buffer CMOS ADC/DACs, ASICs or other wide OUTPUT swing devices in SINGLE-SUPPLY systems.

Features
SINGLE-SUPPLY Operation: 2.2 Volts to 6 Volts
■ High OUTPUT Current: ±100MA
■ Wide Bandwidth: 3.5 MHz
■ Slew Rate: 6.2 V/µs
■ No Phase Reversal
■ Unity Gain Stable
RAIL-TO-RAIL Input and OUTPUT

Applications
■ Multimedia Audio
■ LCD Driver
■ ASIC Input or OUTPUT Amplifier
■ Headphone Driver

View
Part Name(s) : AD8571ARM ADI
Analog Devices
Description : Zero-Drift, SINGLE-SUPPLY, RAIL-TO-RAIL Input/OUTPUT Operational AMPLIFIERS

GENERAL DESCRIPTION
This new family of AMPLIFIERS has ultralow offset, drift and bias current. The AD8571, AD8572 and AD8574 are single, dual and quad AMPLIFIERS featuring RAIL-TO-RAIL input and OUTPUT swings. All are guaranteed to operate from 2.7 V to 5 V single supply.
The AD857x family provides the benefits previously found only in expensive autozeroing or chopper-stabilized AMPLIFIERS. Using Analog Devices’ new topology these new zero-drift AMPLIFIERS combine low cost with high accuracy. (No external capacitors are required.) In addition, using a patented spread-spectrum autozero technique, the AD857x family virtually eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
   Low Offset Voltage: 1 mV
   Input Offset Drift: 0.005 mV/8C
   RAIL-TO-RAIL Input and OUTPUT Swing
   5 V/2.7 V SINGLE-SUPPLY Operation
   High Gain, CMRR, PSRR: 130 dB
   Ultralow Input Bias Current: 20 pA
   Low Supply Current: 750 mA/Op Amp
   Overload Recovery Time: 50 ms
   No External Capacitors Required
  
APPLICATIONS
   Temperature Sensors
   Pressure Sensors
   Precision Current Sensing
   Strain Gage AMPLIFIERS
   Medical Instrumentation
   Thermocouple AMPLIFIERS

View
Part Name(s) : AD8571ARMZ AD8574ARZ ADI
Analog Devices
Description : Zero-Drift, SINGLE-SUPPLY, RAIL-TO-RAIL Input/OUTPUT Operational AMPLIFIERS

GENERAL DESCRIPTION
This family of AMPLIFIERS has ultralow offset, drift, and bias current. The AD8571, AD8572, and AD8574 are single, dual, and quad AMPLIFIERS, respectively, featuring RAIL-TO-RAIL input and OUTPUT swings. All are guaranteed to operate from 2.7 V to 5 V single supply.
The AD857x family provides benefits previously found only in expensive auto-zeroing or chopper-stabilized AMPLIFIERS. Using Analog Devices, Inc., topology, these zero-drift AMPLIFIERS combine low cost with high accuracy. (No external capacitors are required.) Using a patented spread-spectrum, auto-zero technique, the AD857x family eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
   Low offset voltage: 1 μV
   Input offset drift: 0.005 μV/°C
   RAIL-TO-RAIL input and OUTPUT swing
   5 V/2.7 V SINGLE-SUPPLY operation
   High gain: 145 dB typical
   CMRR: 140 dB typical
   PSRR: 130 dB typical
   Ultralow input bias current: 10 pA typical
   Low supply current: 750 μA per op amp
   Overload recovery time: 50 μs
   No external capacitors required
  
APPLICATIONS
   Temperature sensors
   Pressure sensors
   Precision current sensing
   Strain gage AMPLIFIERS
   Medical instrumentation
   Thermocouple AMPLIFIERS

View
Part Name(s) : AD8571 AD8571AR AD8571ARM AD8572 AD8572AR AD8572ARU AD8574 AD8574AR AD8574ARU ETC
Unspecified
Description : Zero-Drift, SINGLE-SUPPLY, RAIL-TO-RAIL Input/OUTPUT Operational AMPLIFIERS

GENERAL DESCRIPTION
This new family of AMPLIFIERS has ultralow offset, drift and bias current. The AD8571, AD8572 and AD8574 are single, dual and quad AMPLIFIERS featuring RAIL-TO-RAIL input and OUTPUT swings. All are guaranteed to operate from 2.7 V to 5 V single supply.
The AD857x family provides the benefits previously found only in expensive autozeroing or chopper-stabilized AMPLIFIERS. Using Analog Devices’ new topology these new zero-drift AMPLIFIERS combine low cost with high accuracy. (No external capacitors are required.) In addition, using a patented spread-spectrum autozero technique, the AD857x family virtually eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
  Low Offset Voltage: 1 mV
  Input Offset Drift: 0.005 mV/8C
  RAIL-TO-RAIL Input and OUTPUT Swing
  5 V/2.7 V SINGLE-SUPPLY Operation
  High Gain, CMRR, PSRR: 130 dB
  Ultralow Input Bias Current: 20 pA
  Low Supply Current: 750 mA/Op Amp
  Overload Recovery Time: 50 ms
  No External Capacitors Required

APPLICATIONS
  Temperature Sensors
  Pressure Sensors
  Precision Current Sensing
  Strain Gage AMPLIFIERS
  Medical Instrumentation
  Thermocouple AMPLIFIERS

 

View
Part Name(s) : OP291GP OP491GRU ADI
Analog Devices
Description : Micropower SINGLE-SUPPLY RAIL-TO-RAIL Input/OUTPUT Op Amps

GENERAL DESCRIPTION
The OP191, OP291, and OP491 are single, dual and quad micropower, SINGLE-SUPPLY, 3 MHz bandwidth AMPLIFIERS featuring RAIL-TO-RAIL inputs and OUTPUTs. All are guaranteed to operate from a 3 V single supply as well as ±5 V dual supplies.
   
FEATURES
    SINGLE-SUPPLY Operation: 2.7 V to 12 V
    Wide Input Voltage Range
    RAIL-TO-RAIL OUTPUT Swing
    Low Supply Current: 300 μA/Amp
    Wide Bandwidth: 3 MHz
    Slew Rate: 0.5 V/μs
    Low Offset Voltage: 700 μV
    No Phase Reversal
   
APPLICATIONS
    Industrial Process Control
    Battery-Powered Instrumentation
    Power Supply Control and Protection
    Telecom
    Remote Sensors
    Low-Voltage Strain Gage AMPLIFIERS
    DAC OUTPUT Amplifier
   

View
Part Name(s) : OPA2343 OPA2343EA OPA2343UA OPA343 OPA343NA OPA343UA OPA4343 OPA4343EA OPA4343NA OPA4343UA BB
Burr-Brown -> Texas Instruments
Description : SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS MicroAmplifier ™Series

DESCRIPTION
OPA343 series RAIL-TO-RAIL CMOS operational AMPLIFIERS are designed for low cost, miniature applications. They are optimized for low voltage, single supply operation. RAIL-TO-RAIL input/OUTPUT and high speed operation make them ideal for driving sampling analog-to-digital converters. They are also well suited for general purpose and audio applications as well as providing I/V conversion at the OUTPUT of D/A converters. Single, dual, and quad versions have identical specifications for design flexibility.

FEATURES
RAIL-TO-RAIL INPUT/OUTPUT
●MicroSIZE PACKAGES
●WIDE BANDWIDTH: 5.5MHz
●HIGH SLEW RATE: 6V/µs
● LOW THD+NOISE: 0.0007% (f = 1kHz)
●LOW QUIESCENT CURRENT: 850µA/chan
●SINGLE, DUAL, AND QUAD

View
Part Name(s) : 8170FSZ 8173FSZ EL8170 EL8170FSZ EL8170FWZ-EVAL EL8173 EL8173EV1Z EL8173FSZ EL8173FWZ-EVAL EL8170FSZ-T EL8173FSZ-T Renesas
Renesas Electronics
Description : Micropower, Single Supply, RAIL-TO-RAIL Input-OUTPUT Instrumentation AMPLIFIERS

The EL8170 and EL8173 are micropower instrumentation AMPLIFIERS optimized for single supply operation over the +2.4V to +5.5V range. Inputs and OUTPUTs can operate RAIL-TO-RAIL. As with all instrumentation AMPLIFIERS, a pair of inputs provide very high common-mode rejection and are completely independent from a pair of feedback terminals. The feedback terminals allow zero input to be translated to any OUTPUT offset, including ground. A feedback divider controls the overall gain of the amplifier.

Features
• 95µA maximum supply current
• Maximum offset voltage
    - 200µV (EL8170)
    - 1000µV (EL8173)
• Maximum 3nA input bias current
• 396kHz -3dB bandwidth (G = 10)
• 192kHz -3dB bandwidth (G = 100)
• Single supply operation
    - Input voltage range is RAIL-TO-RAIL
    - OUTPUT swings RAIL-TO-RAIL
• Pb-Free (RoHS Compliant)

Applications
• Battery- or Solar-Powered Systems
• Strain Gauges
• Current Monitors
• Thermocouple AMPLIFIERS

View
Part Name(s) : OP191GBC OP191GP OP291GBC OP491HRU ADI
Analog Devices
Description : Micropower SINGLE-SUPPLY RAIL-TO-RAIL Input/OUTPUT Op Amps

GENERAL DESCRIPTION
The OP191, OP291 and OP491 are single, dual and quad micropower, SINGLE-SUPPLY, 3 MHz bandwidth AMPLIFIERS featuring RAIL-TO-RAIL inputs and OUTPUTs. All are guaranteed to operate from a 3 volt single supply as well as ±5 volt dual supplies.

FEATURES
  SINGLE-SUPPLY Operation: 2.7 V to 12 V
  Wide Input Voltage Range
  RAIL-TO-RAIL OUTPUT Swing
  Low Supply Current: 300 µA/Amp
  Wide Bandwidth: 3 MHz
  Slew Rate: 0.5 V/µs
  Low Offset Voltage: 700 µV
  No Phase Reversal

APPLICATIONS
  Industrial Process Control
  Battery Powered Instrumentation
  Power Supply Control and Protection
  Telecom
  Remote Sensors
  Low Voltage Strain Gage AMPLIFIERS
  DAC OUTPUT Amplifier

View
Part Name(s) : AD8591ART AD8592ARM AD8594ARU ADI
Analog Devices
Description : CMOS Single Supply RAIL-TO-RAIL Input/OUTPUT Operational AMPLIFIERS with Shutdown

GENERAL DESCRIPTION
The AD8591, AD8592 and AD8594 are single, dual and quad RAIL-TO-RAIL input and OUTPUT single supply AMPLIFIERS featuring 250 mA OUTPUT drive current and a power saving shutdown mode. The AD8592 includes an independent shutdown function for each amplifier. When both AMPLIFIERS are in shutdown mode the total supply current is reduced to less than 1 µA. The AD8591 and AD8594 include a single master shutdown function that reduces total supply current to less than 1 µA. All amplifier OUTPUTs are in a high impedance state when in shutdown mode.
   
FEATURES
    Single Supply Operation: +2.5 V to +6 V
    High OUTPUT Current: ±250 mA
    Extremely Low Shutdown Supply Current: 100 nA
    Low Supply Current: 750 μA/Amp
    Wide Bandwidth: 3 MHz
    Slew Rate: 5 V/μs
    No Phase Reversal
    Very Low Input Bias Current
    High Impedance OUTPUTs When in Shutdown Mode
    Unity Gain Stable
   
APPLICATIONS
    Mobile Communication Handset Audio
    PC Audio
    PCMCIA/Modem Line Driving
    Battery Powered Instrumentation
    Data Acquisition
    ASIC Input or OUTPUT Amplifier
    LCD Display Reference Level Driver
   

View
Part Name(s) : OP181 OP181GP OP181GS OP281GP OP281GRU OP481GP OP481GRU ADI
Analog Devices
Description : Ultralow Power, RAIL-TO-RAIL OUTPUT Operational AMPLIFIERS

GENERAL DESCRIPTION
The OP181, OP281 and OP481 are single, dual and quad ultralow power, SINGLE-SUPPLY AMPLIFIERS featuring RAIL-TO-RAIL OUTPUTs. All operate from supplies as low as 2.0 V and are specified at +3 V and +5 V single supply as well as ±5 V dual supplies.

FEATURES
Low Supply Current: 4 mA/Amplifier max
SINGLE-SUPPLY Operation: 2.7 V to 12 V
Wide Input Voltage Range
RAIL-TO-RAIL OUTPUT Swing
Low Offset Voltage: 1.5 mV
No Phase Reversal

APPLICATIONS
Comparator
Battery Powered Instrumentation
Safety Monitoring
Remote Sensors
Low Voltage Strain Gage AMPLIFIERS

 

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]